Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹84.2 L
EMD Value
₹1.7 L
Closing Date
11 Jun 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
Indrakumar G
Providing FHTCs to 256 households of MAHADEVAKODIGEHALLI Habitation in MAHADEVAKODIGEHALLI village in BANDIKODIGEHALLI Grama Panchayat in Yelahanka Taluk, Bangalore Urban District through SVS
RWSSD/2024-25/WS/WORK_INDENT8058
RWSSD/2024-25/WS/WORK_INDENT8058
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Bengaluru Urban
8 documents required · 7 mandatory · 1 optional
3.2 b)To qualify for award of this contract each Tenderer in its name should have in the last five years (2017-2018 to 2021-2022) satisfactorily completed at least Similar drinking Water supply project of value not less than Rs. 42.11 lakhs (50 percent of the estimated cost of amount put to tender) Note Successful completion certificate shall be submitted which through to be issued by an officer not below the rank of Executive Engineer
PWD CLASS III & ABOVE REGISTRATION LICENCE COPY MUST UPLOAD
a.3.2 a. To qualify for award of this contract each Tenderer in its name should have in the last five years 2017-2018 to 2021-2022 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 84.22 Lakhs.usually not less than One times the estimated annual payments under this contract The certificate should be affixed with the seal of the office of the Chartered Accountant with UDIN Number. a. Income Tax Returns Filed b. Audited statement c. Profit & Loss Statementd. Balance Sheet certified by the ICAI registered Chartered Accountant must be submitted for the relevant years along with compulsory UDIN Id No.Note: Annual turnover for the past five relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible
3.2 c) To qualify for award of this contract, each Tenderer in its name should have in the last five years (2017-2018 to 2021-2022) Executed in any one Finacial Year,the minimum Four quantities of work (Usually 50 Percent of the peak annual rate of construction) 1. Earth work in all sort of soils 845.17 Cum 2. Cement Concrete 36.89 Cum 3Providing and laying Pipeline 4593.68Rmtr
3.3 (b) liquid assets and /or availability of credit facilities of not less than Rs 25.27 lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc (usually 30 Percent of the estimated cost of amount put to tender) & and shall submit the certificate) in the prescribed format only issued by Nationalised/Scheduled Bank for the particular work.As Per ANNEXURE-III
3.6Tenderer who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than total tender value. The available tender capacity will be calculated asunder. Assessed available tender capacity - AXNX1.5-B Where A-Maximum value of works executed in any one year during the last five years updated to current year price level taking into account the completed as well as works in progress N -Value for assessment year B - Value, at current year price level, of existing commitments and on going works to be completed in 15months
The Bidder Should Declare Clearely wheather the bidder has not been black listed/banned/debarred by any Central/ State/UT Government Department or Undertaking/Organization should be furnished.
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be counter signed by the Engineer in charge, not below the rank of Executive Engineer or equivalent
The Copy of the PAN card with GSTIN Registration Certificate
CONTACT INFORMATION (i e Mobile No & E-mail ID) of the Contractor should be furnished
Availability by owning bore well drilling rig with 7A Registration Certificate OR Contractor should tie-up with bore well Rig owner for Drilling Bore well submit the tie-up Agreement, Rig details and 7A Registration Certificate.
Not Applicable
Not Applicable
CONTACT INFORMATION (i e Mobile No & E-mail ID) of the Contractor should be furnished
Not Applicable
₹2,110
₹1.7 L
4 Jun 2024
4 Jun 2024
12 Jun 2024
10 Jun 2024
30 May 2024
Providing FHTCs to 256 households of MAHADEVAKODIGEHALLI Habitation in MAHADEVAKODIGEHALLI village in BANDIKODIGEHALLI Grama Panchayat in Yelahanka Taluk, Bangalore Urban District through SVS
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 63MM DIA
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 75MM DIA
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 90MM DIA
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendments 63 MM DIA
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendments 75 MM DIA
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendments 90 MM DIA
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 63 MM DIA
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 75 MM DIA
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 90 MM DIA
Supply and delivery at site of brand new Electrofusion Reducer as per IS 8360 -1977 with latest amendments 75 X63 MM DIA
Supply and delivery at site of brand new Electrofusion Reducer as per IS 8360 -1977 with latest amendments 90X63 MM DIA
Supply and delivery at site of brand new Electrofusion Reducer as per IS 8360 -1977 with latest amendments 90 X75MM DIA
Supply and delivery at site of brand 63 mm dia HDPE End Cap with Pipe of 0.2 m length
Supply and delivery at site of brand new best make Gate Valve as per IS 778/1984 with ISI Mark and as per its latest amendments 65 MM DIA
Supply and delivery at site of brand new best make Gate Valve as per IS 778/1984 with ISI Mark and as per its latest amendments 80 MM DIA
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Labour charges for making flanged joints including cost of jointing materials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with al...
Providing Air valve conforming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any, 80MM DIA
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, desi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Supply and fixing of Horizontal Mechanical Woltman type hemetically sealed water meters with copper Glass register with IP 68 protection. The meter shall be removable mechanism type manufactured as IS...
Providing & fixing electro fusion saddle comply with Bs EN12201 -3:2011, PN-12.5 rating andfood grade raw material as per BS 6920 with material of construction PE 80 or PE 100 andcolour of fitting - B...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Supply of PPR End cap confirming to IS 15801-2008 and DIN standards 8077/8092 20mm
Supply of PPR Plain union cap confirming to IS 15801-2008 and DIN standards 8077/8092 20mm
Supply of PPR Male threded coupling confirming to IS 15801-2008 and DIN standards 8077/8092 20mm
Supply of PPR Female threded Elbow confirming to IS 15801-2008 and DIN standards 8077/8092 20x1/2mm
Supply of PPR Female threded coupler confirming to IS 15801-2008 and DIN standards 8077/8092 20x1/2mm
Supply of PPR Female threded coupler confirming to IS 15801-2008 and DIN standards 8077/8092 25x1/2mm RR 07/06/02022
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
Supply of PPR Gate valve confirming to IS 15801-2008 DIN standards 8077/8092 20mm
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Supply and fixing pot rest slab of size 0.45 X 0.30 X 0.20 meters with central dip for resting the pot including two line dressing and edges rounded and with all lead.
Supplying and fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6 mm dia rods for verticals and stirrups and rendered smooth, including engraving letters "KWB and ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Flow Control valve 5LPm/10LPM/15LPM:Providing and fixing Flow control valve using food grde materials SS 316 ball / 1/2" [15mm] including cost of all materials, labour charges, HOM and testing complet...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...
Supply and delivery at site of brand new best make Non-Return Valve as per IS 778/1984 with ISI Mark and as per its latest amendments
Providing and fixing board display information such as "Name of work, Tender cost, Name of contractor, 'Work completion and liability period etc' having retangular shape of 1.20m x 0.90 m size made ou...
Chlorinator 80gms/Batch Production capacity : 25 gms/hr Total time per Batch : 8Hrs. Total volume of chlorine generation : 200gms/batch. Salt Required per hr. : 800gms/batch. Electrical power required...
Chlorinator 200gms/Batch Production capacity : 25 gms/hr Total time per Batch : 8Hrs. Total volume of chlorine generation : 200gms/batch. Salt Required per hr. : 800gms/batch. Electrical power require...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works in all kinds of soils , as per drawing and techni...
Providing Brick masonary with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :One coat with paint of approved quality to give ...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffo...
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...
Providing 80 mm dia Sluicevalve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials ,labour Charges etc, Completed.
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for top slab of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggre...
Labour charges for fabricating Mild Steel or TMT Steel bars of all sizes for reinforcement for RCC works, including conveying steel to work spot with all lead, cleaning, straightening, cutting, bendin...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms,including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includin...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing plastering in CM 1:3 proportion for RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffolding and giving satisfactory water...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
General condition Scan copy.pdf
Tender Document • 0.60 MB
Tender-02.pdf
Tender Document • 0.05 MB
BID DOC FORMAHADEVA KODIGEHALL kw3.docx
Tender Document • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .