Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹16.9 L+₹47,910 (2.91%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹18.2 L+₹1.8 L (10.7%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹20.6 L+₹4.1 L (25.0%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹21.3 L+₹4.8 L (29.5%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar PIN-143001
REPAIR TO JOINERY AND CONNECTED ITEMS IN MARRIED ACCOMODATION UNDER AGE B/R-I AT AMRITSAR CANTT
2022_MES_533142_1
GE/ASR-23/2022-23
Open Tender
Civil Works
Item Rate
150 days
GE Amritsar
Class E, category ai
8 documents required · 8 mandatory
₹500
GE Amritsar
₹40,000
Yes
12 Dec 2022
23 Jun 2022
28 Jul 2022
23 Jun 2022
27 Jul 2022
14 Jul 2022
60 days
Amount
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; complete all as specified and as directed by the Engineer-in-Charge.
Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters ( without taking off shutters from the frames) ; complete all as specified and as directed by the Engineer-in-Charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ; complete all as specified and as directed by the Engineer-in-Charge.
Taking down Wooden Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after necessary easing and resecuring with & including new stainless steel butt hinges with screws ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for pressed steel frames for Doors of size 105mm x 60mm with one or more rebates, made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate etc and tarring to inner surfaces (surface in contact with concrete/brick surface) of chowkhats and hinges , including one shop coat of red oxide primer to door frame at contractors workshop ; with & including filling of back of chowkhats with PCC 1:3:6 type C0 (using crushed stone aggregate) & filling hold fast with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum six number of each frame ) ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for pressed steel frames for Doors of size 125mm x 60mm with one or more rebates, made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate etc and tarring to inner surfaces (surface in contact with concrete/brick surface) of chowkhats and hinges , including one shop coat of red oxide primer to door frame at contractors workshop ; with & including filling of back of chowkhats with PCC 1:3:6 type C0 (using crushed stone aggregate) & filling hold fast with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum six number of each frame ) ; complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Box type steel window double shutters (both Glazed & Gauzed shutters) made of ERW tube P - section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass with & including Sheet glass, SS wire cloth, fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1019/08 Sh 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by the Engineer-in-Charge :- (a) Hold fasts 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintel hinges size 75mmx12mm - 2 Nos per leaf (g) MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly. (h) 3mm thick clear sheet glass 3 nos per glazed leaf of reqd sizes glazing with oil putty. (j) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to each gauged shutters of window. (k) Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and (l) Repair all the damaged surfaces around window with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass with & including 3mm thick Sheet glass glazing with oil putty, MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly, fixture and fittings like as Stopper, Cleat, Pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-1019/08 sheet 1/3 to 3/3 dt 01 May 2008 , including Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and repair all the damaged surfaces around ventilators with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Supply and Fixing for 100mm x 63mm single rebated 100%Solid WPC Door Frame , made out of 100% lead free (single extruded process) material with density 780 kg/Cum and manufactured by an ISO : 9001-2015 certified company . The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity ; complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing for 30mm thick moulded WPC factory made 100% solild door shutter (conforming as per IS:4020) made from 1100% lead free (single extruded process) with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed by the Engineer-in-Charge.
Supply and Fixing in repairs 19/20mm Block boards, grade 1st quality, exterior grade, commercial type as in kitchen cabinate shutters/shelves or cupboard shutters/shelves fixed with screws to frame work ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinate shutters/shelves or cupboard shutters/shelvesfixed with screws to timber frame work ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing 100mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing Continuous (piano) hinges, mild steel, bright finish or electrogalvanised , with 30mm width of flaps (when open); complete all as specified and as directed by the Engineer-in-Charge.
Material & labour for MS Framed work as in doors or gates or grills of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410-W (GdeE- 250) quality-A complete complete all as specified and as directed.
Supply and Fixing for 35mm thick Second class hard wood Glazed and skeleton shutters divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 1mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing in repairs 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane , including hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing in repairs 3mm thick Figured glass, pin head type quality and glazing with oil putty in square exceeding 0.5 sqm in each pane , including hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 150mm long Handle Aluminium anodised cast type ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 150mm long Aluminium anodised barrel tower bolt ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 200mm long Aluminium anodised barrel tower bolt ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 100mm stainless steel butt hinges ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs 150mm long Handle Aluminium anodised cast type ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs 150mm long Aluminium anodised barrel tower bolt ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs 200mm long Aluminium anodised barrel tower bolt ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ; complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described ; and applying two coats of synthetic enamel paint of Ist quality over one coat of red oxide primer of same make ; including cleaning of glass panes, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, ; complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm in width or girth not otherwise described ; and applying two coats of synthetic enamel paint of Ist quality over one coat of pink primer of same make ; including cleaning of glass panes, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, ; complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing 18 mm thick solid PVC ply of 1st quality of apprvoed colour fixed with screws, solvent cement / adhesive to make kitchen cabinate, shelves and cupboard shutters/shelves , including dismantling & taking down the old unserviceable kitchen cabinate, shelves and cupboard shutters/shelves complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing 5mm thick solid PVC ply of 1st quality of apprvoed colour fixed with screws, solvent cement / adhesive as in back side of kitchen cabinate and cupboard , including dismantling & taking down the old unserviceable kitchen cabinate and cupboard complete all as specified & directed by the Engineer-in-Charge.
Supply and Fixing in repairs stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm ; complete all as specified and as directed by the Engineer-in-Charge. Note :- Net area of front finished surface will be measured.
Supply and Fixing in repairs 40mm long self closing type hydraulic steel hinges ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs stainless steel Handle of size 75 to 80mm ; complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for Welding in repairs exceeding 2.5cm but not exceeding 5cm in length , thickness of Metal to be welded not exceeding 6mm ; complete all as specified and as directed by the Engineer-in-Charge.
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer-in-Charge.
Material & Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material & Labour for brick work but except bricks (using old dismantled serviceable bricks retreived from Srl item No.42 & shall be reused only after necessary cleaning of mortar) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material & Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar (1:4) finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material & Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar (1:6) finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of newly plastered surfaces of walls, pillars, corniese etc ; & applying white cement base putty to make the surfaces even & smoooth ; and applying Two coats of Oil Bound Distemper over one coat of cement primer to walls, pillars, cornieces etc ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Material & labour for preparation of newly plastered surfaces of walls, pillars, corniese etc ; & applying white cement base putty to make the surfaces even & smoooth ; and applying Two coats of Cement base paint over one coat of cement primer to walls, pillars, cornieces etc ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
sandhu builders
amardeep traders
m/s inder construction co
m/s. gopal krishan
GEE EMM ASSOCIATES
MAAN ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .