REPAIRS TO DOORS, WINDOWS, VENTILATORS, CUPBOARD AND OTHER RELATED B/R WORKS IN BLDG NO P-60, 62 (OFFRS ACCN), T-18 TO 361, P-48, GRC AREA (OTM AND MD ACCN), T-5 TO T-10, P-1 TO 7, P-36 TO 43, P-46, ... UNDER AGE B/R-I UNDER GE KAMPTEE.

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius , built in cement mortar 1:6 complete all as specified and directed.

All as per item No 2 above but half brick thick wall in CM 1:4 complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces including finished fair and even (in patches) complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:4 on brick or concrete surfaces even & fair smooth, using water proofing liquid compound and without using extra cement (in patches) complete all as specified and directed. Note:- water proofing liquid will be measured and paid separately.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of primer and a coat of wall care putty etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/wall etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/wall etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

All as per item No 12 above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L for coloured /printed glazed ceramic tiles 300x450x 6 to 7mm thick, in floors/ walls skirting/ dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for light/dark shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 sqm in floor/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 15 above but as in skirting/ dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in laid bedded and pointed in any mortar floors, aprons etc and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 18-25 mm thick over cement 20mm thick screed bed or bedding in CM 1:6 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for pre-polished granite 20mm thick fixed on platform/ shelves over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as specified and directed.

M&L for green/white marble 18-20 mm thick of machine cut as in riser, dado platform etc set and jointed in white cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement including cutting, polishing (mirror type) or use in shelf and cupboard etc complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit wiring, etc and making good, cutting exc 20cm girth complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in weather boarding/eaves board in approved design/ pattern/shape to match with existing adjacent water boarding/eaves boards inclusive, as in ridges, hips, valley gutters, drip and straight and fixed with self tapping screw/nut bolt/normal GI screw/nail et as per site requirement and for entire completion of work at any height/position complete all as specified and directed.

S&F acrylic corrugated/ plain sheet 3mm thick of any colour fixed as in roof covering/ cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

S&F structural rolled mild steel as in roof trusses (framed), purlins crane gantries, rail and fastenings and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkat and frame wrought framed rebated on the solid rounded chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made kiln seasoned chemical treated 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face is covered with both side decorative face veneer with lapping/ frame to match complete all as specified and directed.

S&F solid PVC frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube opening as per drawing complete all as specified and directed.

S&F PVC factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with wood free EPS 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on sheet on the front face & 2mm colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door wire gauzed i.e. panel will be of wire gauze both side pre-laminated PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded wood grain colour PVC 'C' channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F in repair 18/19mm Pre-laminated particle board, interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 100mm hasp & staple safety type stainless steel with mild steel hing pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F continuous (piano) hinges, width of flaps(when open in 30mm) mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F Deco Door Seal (94Cm / 36.5" or door width size) Aluminium Plate with Nylon Brush Ivory Matt complete all as specified and directed.

S&F steel windows with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars complete all as specified and directed.

S&F framed work such as grills, etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws as per architectural drawings complete all as specified and directed.

M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed.

S&F brass mortise lock (4 levers), vertical type, size 100mm long including all fitting arrangements complete all as specified and directed.

S&F heavy duty double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all specified and directed.

S&F for sheet glass 5.50 mm thick tinted quality and glazing exc 0.50 sqm in each panel complete all as specified and directed.

S&F pre laminated particle board 12mm thick exterior grade decorative choice 1mm thck lamination both sides with fixed with necessary Aluminium beading complete all as specified and directed.

S&F 100mm long stainless steel butt hinges. heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100mm long butt hinges med wt cold rolled mild steel and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.

S&F 250 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F mild steel Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S&F 100mm long fancy type butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F 200mm long fancy type brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed and 12mm dia fixed complete all as specified and directed.

S&F 250mm long fancy type brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F fancy type brass door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane including taking down old broken glasses complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square not exc 0.5 Sqm in each pane including taking down old broken glasses complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for two coats of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10 cm in width or girth including preparation or surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of over 10 cm in width or girth complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, triple layer, ISI marked (cylindrical vertical with closed top) of 500ltr capacity, hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt 20mm-210g) complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair white Vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level, white/coloured with inlet ball valve float and handle including bracket, PVC flush pipe 32mm dia and PVC connection pipes (including taking down old cistern) complete all as specified and directed.

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) including necessary elbow, tee, socket, etc of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed.

Demolition of unreinforced cement concrete in floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 20mm graded stone aggregate) as in sub base, foundation etc complete all as specified and directed.

M&L for chequered tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for 50mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in coping/ roof kerbs or mud stops, steps etc rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate), as in foot path, pavement, plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

Dismantling old structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling fencing wire mesh of any description complete all as specified and directed.

Dismantling post or strut embedded in concrete (wood/ steel/ RCC) any section embedded in concrete including taking out embedded portion and making good complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate) complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F framed work as in doors or gates of angle/tubular or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing complete Fe 410 -W (Gde-E- 250) quality A complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. Note:- Each line wire to be measured.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

S&F MS screw bolts of dia 5-10mm (machine made) with hexagonal or square at one end and screwded with other end or screwed both ends length of bolt not exc 5cm long complete all as specified and directed.

S&F 10mm dia and over round bars in chain link fencing complete all as specified and directed.

M&L for Precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr depth for foundation etc and getting out in hard/dense soil complete all as specified & directed.

M&L for PCC (1:4:8) type-D2, (using 40mm graded stone aggregate) as in sub base, filling and mass-concrete complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, plinth beams, fair finished surface complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. fair finished surface complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for column, pillars, piers, posts and struts for supporting of beam etc complete all as specified and directed.

Formwork to sides and soffits/arches of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, roof slabs, floor slabs, landings and similar work etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for floor/ grade /roof slabs supported or not on walls, roof beams and columns, landings, balconies, canopies, deck slabs, chajja and in shelves and the like etc complete all as specified and directed.

Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, arches and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC 1:1 ½:3 (using 20mm graded stone aggregate) (nominal mix) for domes, vaults, shell roofs, arch ribs and folded plates and the like etc complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for reinforced concrete pipes (bore of pipe 300mm), class NP2, laid and jointed complete with collars including with PCC (1:4:8) type D2 in foundation bed complete all as specified and directed.

M&L for reinforced concrete pipes (bore of pipe 450mm), class NP2, laid and jointed complete with collars including with PCC (1:4:8) type D2 in foundation bed complete all as specified and directed.

M&L for reinforced concrete pipes (bore of pipe 600mm), class NP2, laid and jointed complete with collars including with PCC (1:4:8) type D2 in foundation bed complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.45,827.50]

Meet Road Lines

Bidder Name

Meet Road Lines

M/s Jagdish Staioners and General Stores