Construction of Wazu Khana at Hazratbal Shrine by way of Door/window shutters, painting, devri stone work and external disposal/drainage work

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 metre in width as well as 10sqm on plan incl. disposal of excavated earth lead up to 50 metres lift upto 1.5 metres as directed by engineer in charge. All kind of soils.

Trench excavation in soft / hard soil including dressing of sides and ramming of bottom including all lifts and leads up to 50 metre including dumping of material at site of work complete job.

Cutting road and making good the same including supply of extra quantities of material i.e aggregate, moorum screening, red bajri and Labour required. (Bitumionous portion) complete job as per instructions of engineer in charge.

Providing and laying of hand packed soling stone 150 mm size including ramming and dressing all leads and lifts, carriage cost of to site of work complete job

Providing and laying in position cement concrete of specific grade excluding cost of shuttering with all leads, lifts, carriage upto site of work complete job 1:4:8 (1 cement : 4 Coarse sand : 8 graded aggregate 40mm normal size Nallah crushed. All work up to plinth level

Providing and laying in position cement concrete of specified grade excl. cost of shuttering. All works upto plinth level 1:2:4 (1 cement :2 coarse sand : 4 gradded Stone aggregate 20mm nominal size).

Providing and fixing of framework to slab /Walls including removal after use complete job including cost of nails, shuttering oil, strutting.

Providing, assembling and placing in position steel reinforcement including bending etc including cost of binding wire complete job. HYSD reinforcement of grade fe500D steel bars, including carriage up to site of work

RCC work in slab and raft in M20 grade 1: 1.5:3 (1 cement :1.5 coarse send : 3 graded aggregate) 20mm nominal size including curing but excluding formwork costs including all material costs, carriage upto site of work, complete job

Providing & laying 50mm thick cement concrete flooring in M15 grade 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry but excluding cost of nosing of steps etc complete job including cost and carriage of material up to site of work up to floor 1st level.

Plaster work in in 1:4 mix in Walls (1 cement : 4 Caorse sand) 12mm thick including applying floating coat of neat cement slurry, scaffolding charges, cost of all materials upto site of the work. complete job

Providing and fixing gand saw cut mirror polished (pre-molded and polished) machine cut for veranda and ramp area etc with anti skid lines of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 mix (1cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch Ups including rubbing, curing, moulding and polishing to edge to give high gloss finish etc incl. throating of the underside (grooving), complete at all levels. Granite of any shade or colour as approved by Engineer Incharge as per archetectural drawings, area of slab upto 0.5 SQM, 18mm thick. (Jet Black)

Extra for fixing marble / granite stone over and above corresponding item in facia, drops, over concrete block of required width as per instructions of engineer in charge with epoxy resin based adhesive (Araldite or equivalent) including cleaning etc complete job

Providing and fixing of 35mm thick panelled or pannelled & glazed shutters for doors, Windows and clerestory Windows fixed with butt Hinges (S.S.) of required size with necessary screws excluding Panelling which will be paid separately, all complete as per architectural drawings and directions of engineer in charge, (Deodar wood). Top rail 6", Lock rail 6", Bottom rail 8" and styles 5" (Deodar Wood)

Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutter for door, Windows and clerestory Windows/area of opening for panel inserts excluding portion inside grooves or rebates to be measured. Panelling for panelled or panelled & glazed shutters 25mm to 40 mm thick. All as per architectural drawings and directions of engineer in charge Deodar wood with bewelled edges on both sides.

Providing and fixing 35 mm thick wire gauze shutter using galvanized MS wire gauze or average width for aperture 1.4 mm in both directions with wire of dai 0.63 mm for Windows / ventilators with Hinges (SS ISI marked of required size) and necessary screws, (Kail wood), complete job

Providing fixing glazed shutters for windows /ventilators and clerestory windows using 10 kg/Sm (4mm thick) float glass panes including ISI marked SS Pressed butt Hinges bright finished of required size with necessary screws, 35 mm thick Kail wood, complete job

Providing and applying primer coat with ready mix pink or grey primer of approved brand and manufacture on wood work (hard/soft hard wood) including scaffolding charges wherever required complete job and red oxide primer for wire gauze shutters

Providing and painting new wood/wood based surface/ wire gauze with two or more coates of synthetic enamel of specified shade and brand to give an even shade including preparation of surface and sand preparing and cleaning, excluding priming coat as per satisfaction of engineer in charge complete job (Asian Paints, Nerolac, Berger or equivalent brand)

Providing and fixing of superior quality fittings (Aluminium) of approved brand as approved by engineer in charge complete as per specification (Gaylord or equivalent) include screws

Tower Bolt 150mm (Doors)

Handle 150mm (Doors)

Aluminium L-Drop 8"(Doors)

Tower Bolt 100mm (Windows)

Handle 100mm (Windows)

I- Hook 150mm (Windows)

L-Chop 8" (Main Door)

T-Bolt 8"(Main Door)

Handle 10" (Main Door)

Providing and applying of water thinnable cement primer of approved brand and manufacturer on all types of cement plaster, concrete, cealing, surfaces/ substrates (which are subjected to continuous seepage or dumpers) Any surface imperfections such as holes, dents, fine cracks etc shall be covered by filling with wall putty wherever required. All material shall be Asian, Nerolac, Berger or equivalent make. The rates incl. cost of material, labour, Scaffolding, ladder charges, storing etc Upto floor 3 level complete job

Providing and laying chissel dressed devri stone of required size 4" thick laid over a base of 20mm thick (average) mortar as per architectural Drawings in cement mortar 1:6 mix (1 cement :6 coarse sand) incl. pointing of joints in plinth & 1st floor including curing, cost and carriage upto site of work. semi chisel dressed.

Providing and fixing polycarbonate plain sheet (2.5 mm thick) on bathroom doors on back side lower door panel up to 3'_0" height and up to 2'_6" width with stainless steel screws with washer, including cutting charges, cost and carriage of material up to site of work complete job as per instruction of engineer in charge

Providing and fixing soil waste and vent pipes IS 13592 and fitting s IS 14735 suitable to rubber ring joints which include bends, rubber ring jointing junctions, clean out plug, cowls, offsets, collar, MS holder bat clamps access pieces, trap of self cleansng design etc complete including jointing (finolex Astral, Prince or equivalent heavy type) complete job External disposal lines including trenching and refilling 160mm PVC SWR socketed pipe with rubber ring joints as per IS 13592 type B

Providing and filling sand of grading zone-V or coarser grade all around PVC/GI Pipes in external work and lay dry brick over sand layer to protect the pipe.

Construction of PCC inspection chamber/ man holes with wall thickness 9" in cement mortar 1:2:4 (1 cement :2 coarse sand : 4 aggregate 20mm normal size Nallah crushed) Foundation concrete in 1:4:8 mix 3" thick inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4, including CI heavy duty cover and frame.

Size of chamber (Inner)(60x60cm x height as per site requirement (minimum 1'_6") with C.I. cover of 455x610mm Heavy Duty 23 Kg cover & 15 Kg frame.

Size of chamber (30x30cm x height as per site requirement (min. 1'_6") with C.I. cover of 300x300mm Heavy Duty.

M/S DAR CONSTRUCTIONS