Construction of New Control room building for Kuzhithurai SS 110 11 KV Substation at Maruthancode in Kanyakumari EDC

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders.

Dismantling the RR Masonry retaining wall in Cemet mortar and disposing away from the site as directed by the engineer at site.

Earthwork excavating and depositing on bank with initial lead of 10m & lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales murram gravel stoney earth and earth mixed with small size boulders SS.20B for foundation.

Providing anti termite treatement in 4 stages (i) immediately after earthwork excavation and before laying foundation concrete (ii) after refilling for sides of foundation (iii) Before laying of flooring concrete and outside of basement upto 1m alround the building using termite 250ml for 5 litres of water.

Providing PCC 1:4:8 using 40mm HBG metal including cost of all materials, lead, lift, labour, curing etc., complete.

Providing PCC 1:3:6 using 40mm HBG metal including cost of all materials, lead, lift, labour charges etc., complete.

Providing PCC 1:3:6 using 40mm HBG metal including cost of all materials, lead, lift, labour, shuttering charges etc., complete for retaining wall.

Providing PCC 1:2:4 using 20mm HBG metal including cost of all materials, lead, lift, labour, etc., complete.

R.R.Masonry in CM 1:6 using rough stone including cost of all materials, labour, lead, lift, curing etc., complete.

Providing Dry Random Rubble Masonry including cost of all materials, labour, lead, lift, etc., complete.

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4⅜"x 2¾" including cost of materials, labour, lead, lift, curing etc,complete.

Brickwork in CM 1:4 mix using IInd class chamber burnt brick of size 9"x 4⅜"x 2¾" including cost of materials, labour, lead, lift, curing etc,complete.

Refilling with excavated soil complying with standard specification for filling in foundation and basement, including cost of labour and tools, lead, lift, etc., complete.

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - For Column (above plinth beam upto lintel).

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - for Plinth Beam.

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - for Lintel.

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - for Beam.

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - for Sunshade.

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - for Roof slab.

RCC 1:1.5:3 mix using 12 to 20mm HBG metal including cost of all materials,lead, lift,Centering & shuttering charges etc complete,but excluding cost and labour for steel reinforcement rods - for Pre-Cast Cover Slabs.

Providing Reinforcements for all R.C.C. Works including cost of steel, lead, lift, labour for cutting, bending and Placing reinforcements as per drawing,tying with binding wire including Cost of binding wire, etc complete.

Supply and fixing Cuddappah slabs for CubBoards 20/30mm thick including cost of materials, labour, lead,lift fixing etc complete.

Plastering with Cement Mortar1:5,12mm thick including cost of all materials, labour charges, lead, lift, curing etc complete.

Plastering with Cement Mortar1:3,12mm thick for ceiling including cost of all materials, lead, lift,scaffolding charges etc complete.

Plastering with Cement Mortar1:3,20mm thick for floor including cost of all materials, lead, lift, etc complete.

Weathering coarse with one coarse of Pressed tiles of size 230x230x20 mm size approved branded for roof slab to set in cement mortar 1:3 and mixed with crude oil 5% by weight of cement and pointing the tiles with same oil mixed mortar, over a bed of brick jelly [20mm size] mixed with lime ratio 32:12.5,80mm thick with required slope and beaten with wooden beaten including cost of materials labour leads etc. complete as per standard specification.

Supplying fabricating and fixing of steel Single leaf door with outer frame 40x40x6mm M.S. Angle for door frame and shutter frame with 35x35x6mm MS angle with 32 x 6mm cross ties on front and covered with 18 gauge MS Sheet with 25 x 3 mm MS flat alround on backside including cost of all materials fittings locking arrangements one coat of red oxide etc.complete.

Supplying and fixing anodised aluminium Ventilators of size 60cmx40cm fully glazed louver type asper standard specification with approved section for frame and glass 4mm thick including cost of all materials, labour, lead, lift etc complete.

Flooring with non slippery ceramic tiles in CM 1:3 20mm thick including pointing with white cement finishing neatly as per standard and as directed by the Engineer at site.

Dadooing with glazed tiles to set in cement mortar 1:2, 10mm thick including cost of materials, lead,Lift, labours for laying fixing and finishing neatly as per standard specification and as directed by the Engineer at site.

Flooring with approved vertified tiles (2'x2')of ISI make over cement mortor 1:3, 12mm thick including pointing with white cement finishing neatly as per standard specification and as directed by the Engineer at site.

Flooring the Battery room with approved acid proof tiles of ISI make and finishing neatly as per standard specification and as directed by the Engineer at site.

Supply and fixing in position of G.I angle 50x50x5mm of required length for fixing in cable duct side wall as per the direction of Engineer at site including cost of all materials, lead,lift etc complete.

Supply and fixing in position of M.S channel 100mmx50mm size of required length for fixing in cable duct as per the direction of Engineer at site including cost of all materials lead,lift,fabrication charges etc, complete.

Supply and fixing of 5mm thick checquered plate for the cable duct cover including cost of all materials, lead,lift etc complete.

Supply and fixing grill work for windows using 12mm square MS rod as per design & drawing horizontal @ 20cm average spacing and vertical @ 10cm spacing including cost of all materials, one coat of primer lead,lift etc complete.(Wt/m2 @20kg).

Supplying and fixing of Indian type water closet with foot rest combined set 20” size white glazed parry ware with “P” or “S” trap including cost of materials lead, lift, etc., complete.

Supplying and fixing of wash hand basin size 550x450mm of white glazed with C.I. brackets c.p.pillar tap and all connection of water inlet and waste water connection 12mm wheel value soap tray and 600x450mm size mirror (5.5mm thick) etc complete.

Supplying and fixing in position Anodised Aluminium sliding glazed windows in two tracks with frame, bottom gutter 61.85x37mmx 1.055kg/m and side/top 62x29.5mm x0.695 kg/m and shutter lock 39x 20x0.605kg/m, bottom 41x20mm x 0.355 kg/m, side/top 39x20mmx 0.488kg/m, 5mm thick plain glass,rubber beeding,Center lock etc including cost of all materials, labour, lead,lift etc complete.

Supplying fabricating and fixing in position anodised aluminium door half glazed and half ACP board using aluminium box section 45x45x2mm for top,middle and sides,100x45x2mm for bottom and top half fixed with 5mm thick glass (Modi or equivalent) and bottom with 8mm thick (2x4mm thick) ACP sheet of approved quality,motice lock ,Aluminium handle at front & back, door stopper, etc including cost of all materials labour,lead,lift, 6 lever Godrej lock etc complete.

Supply and fixing solid panel PVC door with frame including cost of materials lead, lift, etc., complete.

Supply and fixing 100x50mm PVC floor trap with one PVC door,bend, shoe of 50mm dia including cost of materials lead, lift, etc., complete.

Supplying and fixing in position of 1000litre capacity Sintex tank of ISI make including cost of all materials,nipple,Union etc complete.

Supply and fixing 110mm dia PVC (4Kg/Cm2) pipe for down fall pipe including cost of materials lead, lift, etc., complete.

Supply and fixing 110mm dia PVC 6Kg/Cm2 sewage pipe including cost of materials lead, lift, etc., complete.

Supply and fixing 32mm dia PVC pipe 10Kg/Cm2 for water supply line including cost of specials,labour etc., complete.

Supply and fixing 25mm dia PVC pipe 10Kg/Cm2 for water supply line including cost of specials,labour etc., complete.

Supply and fixing screw down PVC bib cock of best quality including cost of materials lead, lift, etc., complete.

Supply and fixing G.M gate valve best qualityISI make including cost of materials lead, lift, etc., complete - 25mm dia.

Supply and fixing G.M gate valve best qualityISI make including cost of materials lead, lift, etc., complete - 32mm dia.

Supplying and fixing of approved quality of Brass chromium plated towel rod with powder coating of size 60cm including cost of materials, labour charges, etc, complete.

Engraving the month and year of Construction in the plinth beam of the building including cost of granite stone labour for fixing charges, etc, complete.

Colour washing with Plastic emulsion paint (first quality) two coats with one coat of white primer as base coat including cost of materials ,labour,lead, lifts etc complete.

Painting two coats with ready mixed enamel paint for the new steel surface with red oxide primer including cost of materials ,labour,lead,lifts etc complete.

Supply and laying interlocking concrete paver of approved make with M40grade concrete block with minimum thickness of 80mm and providing minimum 100mm thick Quarry dust cushion below the pavers and completing the same as per direction including cost of all materials, labours, lead,lift,curing, etc. complete.

Wiring with 2x 1.50sqmm PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with T.W switch box and 5A F.T switch in flush with wall with 3mm thick hylum sheet for marking good of the concealed portion with suitable colour for PVC concealed light points and fan points.

Wiring with 2x 1.5sqmm PVC unsheathed SC Cu. Conductor of 1100V grade in suitable heavy gauge PVC conduit pipe in wall and ceiling with PVC accessories inflush with wall with 150mm x100mm x75mm PVC switch box 3mm thick hylam sheet for 15Amp 3 pin non interlocking C.S plug with continous earthwire connection of 14 SWG TC wire and good of the concealed portion with suitable colour for plug points.

Wiring with 2x 4sqmm PVC insulated SC unsheathed Cu. Conductor cable of 1100V grade in suitable heavy gauge PVC conduit pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x100mm x75mm PVC switch box concealed type with 3mm thick hylam sheet cover for 15Amp 3 pin flush type non interlocking C.S plug with continous earthwire connection of 14 SWG TC wire and good of the concealed portion with suitable colour for power plug points.

Supplying and fixing of 1200mm sweep 48" AC ceiling fan with stepped electronic 300w regulator with1m down rod on the existing clamps of approved quality as directed by the engineer incharge including cost of materials lead,lift, etc,complete.

Supply and fixing of single 4', 18W LED Tubelight fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing of 30W street light fittings including cost of materials, labour, etc complete.

Supplying and fixing of 4 W LED bulb including cost of materials labour etc complete.

Supplying and Fixing of Water Tight Bulk Head Fittings of approved make suitable for incondescent Lamp with Guard and 14W LED Bulb.

Supply and fixing of Industrial type exhaust fan of 450mm dia with venedian blades to avoid water entry into battery room during rain with necessary fitting arrangements etc,complete.

Earthing as per PWD standard with an earth electrode of 2m Class B GI pipe of dia not less than with necessary masonry works including cost of materials lead lift etc complete.

Supply and fixing single phase 8-way SPMCB sheet metal distribution Board with door cover flush type fitted with bus bars and neutral links with 4-single pole 10Amps MCB's, one 32A double pole isolator and one ELCB(Legrand or equivalent make) with connection including cost of all materials etc complete.

Supply and fixing of TNEB Meter Board Suitable for 32 A fuse unit (500v,32A neutral link and earth link on T.W plank 375x300x19mm with supporting reepers with suitable bolts & nuts for fixing T.W plank with earth connection with 7/20 PVC insulated copper wire.

Wiring with 2x6 Sq.mm PVC insulated unsheathed Copper conductor cable (FINOLEX) of 1100 V grade including suitable G.I wire with reels for service connection including labour,lead, lift etc complete,for service wire.

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED