Performance Based Contract for Operation and Maintenance of selected Water Distribution Stations, Pipeline Networks (Pumping Mains and Distribution Mains), House Service Connections and allied works for 5 (Five) years Package IV Area XV Uthandi and

Bill No.I : a. House Service Connections

Providing House Service Connection as per the relevant Indian standard specifications, including cost of DI saddle, communication pipe GI Class B, water meter (IP68) with AMR compatibility, specials and fittings, fixing in position and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

Bill No.I : b. Shifting of House Service Connections

Bill No. II: Pipeline Laying & Valve Fixing Works

Providing and laying DI (K-7) as per the relevant Indian standard specifications, including cost of specials and fittings and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

Supply & installation of Sluice Valves (K-10) as per relevant Indian standards, including cost of specials and fittings and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

Supply, Installation and commissioning of Electro Magnetic Flow meters, with data loggers, power supply and the protective chambers, provision should be there for data transfer to Server through electronic mode, all hard wares & software included.

Supply, Installation pressure sensors, data loggers and protective chamber at pressure monitoring points, provision should be there for data transfer to Server through electronic mode all hard wares & software included.

Bill No. III: NRW Reduction (Active Leakage Control)

Conducting Initial NRW calculations and establishing the base line NRW, preparing NRW reduction action plan for reducing Commercial & Physical losses

Bill No. IV : O&M Remuneration

Remuneration for Operation & Management of water supply in Water Supply Areas for a period of five years involving O&M of distribution network of DI, CI, PVC and MS pipes and fittings, sluice valves, air valves, scour valves, butterfly valves, bulk flow metres with transmitters, data loggers, booster pumping stations, submersible pump sets, house service connections, chlorination facilities, civil structures and conducting water quality testing and routine maintenance activities related to billing & collection system and customer service & support centre, including all management costs towards Contractor’s employees, labour, equipment, transport, communications, record keeping, reporting, taxes, duties etc., and all operating costs towards preventive maintenance, routine maintenance, periodical maintenance, emergency procedures, consumables, spares, service charges,uniform and safety equipments etc., complete.

Leakage deduction using leak deduction equipment and leak arresting & Repair of DI/HDPE/ PVC/ MDPE pipes using specials, inclusive of all activities, pipe cutting, threading, fixing in position and cost of excavation in all types of strata, dewatering, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

Bill No. VI: Repair and Maintenance of Electro mechanical items in Head Works

IA. NATURE OF REPAIRS TO MOTORS

II.NATURE OF REPAIRS TO PUMP (CENTRIFUGAL) (1450RPM)

B. SWITCHES

VI. A.OIL CIRCUIT BREAKER

B. ENGINE

C. GENERATOR CONTROL PANEL

VIII. VALVES

A. SLUICE VALVE

B. NON RETURN VALVE

D. AIR RELEASE VALVE

IX. TRANSFORMER AND H.T.STRUCTURE

X. HT POLE STRUCTURE/ 4 POLE STRUCTURE

XI. CAPACITOR

XII. VACCUM PUMP

DRAIN PUMPSET

XIII. OTHER EQUIPMENTS

Servicing OHT Crane

Replacement of level indicator (Scale) with PVC plate, number and clamps etc.

OHT & UGT (LS)

LIGHTING EQUIPMENT

SAFETY EQUIPMENT

FIXING OF RATES FOR REPAIRS & MAINTENANCE WORKS OF VARIOUS EQUIPMENTS

TEM NO.2 MV PANEL

ITEM 6 - TAF 2 DIESEL ENGINE WITH SPHL PUMP REPLACEMENT PARTS ON ENGINE SIDE

MACHINERY JOB TO ENGINE

MACHINERY ROLE TO PUMP

5 HP DIESEL ENGINE

Total Cost for First Year, Rs

OPERATION & MAINTANANCE OF WATER SUPPLY SYSTEM FOR SECOND YEAR

Bill No. I: O&M Remuneration

Remuneration for Operation & Management of water supply in Water Supply Areas for a period of five years involving O&M of distribution network of DI, CI, PVC and MS pipes and fittings, sluice valves, air valves, scour valves, butterfly valves, bulk flow metres with transmitters, data loggers, booster pumping stations, submersible pump sets, house service connections, chlorination facilities, civil structures and conducting water quality testing and routine maintenance activities related to billing & collection system and customer service & support centre, including all management costs towards Contractor’s employees, labour, equipment, transport, communications, record keeping, reporting, taxes, duties etc., and all operating costs towards preventive maintenance, routine maintenance, periodical maintenance, emergency procedures, consumables, spares, service charges,uniform and safety equipments etc., complete.

Senior Engineer (Operations)

Distribution Engineer

Net work Assistants/Valve men

NRW Engineer/ Leakage reduction Engineer/ Water supply Pipeline Maintenance Engineer

NRW Technician

Billing Supervisor

Meter Readers/Data entry

Pump Operators

Labours

Security

NRW Equipment

Total Cost for Second Year, Rs

Bill No.II : House Service Connections

Providing House Service Connection as per the relevant Indian standard specifications, including cost of DI saddle, communication pipe GI Class B, water meter (IP68) with AMR compatibility, specials and fittings, fixing in position and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm to 25 mm HSC (Same side)

15 mm to 25 mm HSC (Opp side)

Supplying and Fixing of customer water meter (IP68) with AMR Compatibility, UPVC/MDPE pipes, collars, union, all materials including labour charges for threading, jointing and fixing

Total Cost for Second Year

Bill No. III: Pipes & HSC Repair works

Leakage deduction using leak deduction equipment and leak arresting & Repair of DI/HDPE/ PVC/ MDPE pipes using specials, inclusive of all activities, pipe cutting, threading, fixing in position and cost of excavation in all types of strata, dewatering, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm Dia to 40 mm Dia for House Service Connection (HSC)

100 mm Diameter, GI (K-7) distribution pipeline

150 mm Diameter, GI (K-7) distribution pipeline

200 mm Diameter, GI (K-7) distribution pipeline

250 mm Diameter, GI (K-7) distribution pipeline

300 mm Diameter, GI (K-7) distribution pipeline

350 mm Diameter, GI (K-7) distribution pipeline

400 mm Diameter, GI (K-7) distribution pipeline

450 mm Diameter, GI (K-7) distribution pipeline

500 mm Diameter, GI (K-7) distribution pipeline

600 mm Diameter, GI (K-7) distribution pipeline

700 mm Diameter, GI (K-7) distribution pipeline

800 mm Diameter, GI (K-7) distribution pipeline

Total Cost for Second Year

Bill No. IV: Repair and Maintenance of Electro mechanical items in Head Works

(INCLUDING SALVAGE VALUE)

IA. NATURE OF REPAIRS TO MOTORS

II.NATURE OF REPAIRS TO PUMP (CENTRIFUGAL) (1450RPM)

III. A. REPAIRS TO STARTERS

B. SWITCHES

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

V. CONTROL PANEL SPARES

2 to 5 HP - 1 to 10A

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

VI. A.OIL CIRCUIT BREAKER

VII. GENERATOR

A.ALTERNATOR

B. ENGINE

C. GENERATOR CONTROL PANEL

VIII. VALVES

A. SLUICE VALVE

B. NON RETURN VALVE

D. AIR RELEASE VALVE

IX. TRANSFORMER AND H.T.STRUCTURE

X. HT POLE STRUCTURE/ 4 POLE STRUCTURE

XI. CAPACITOR

XII. VACCUM PUMP

DRAIN PUMPSET

XIII. OTHER EQUIPMENTS

Servicing OHT Crane

Replacement of level indicator (Scale) with PVC plate, number and clamps etc.

OHT & UGT (LS)

LIGHTING EQUIPMENT

SAFETY EQUIPMENT

FIXING OF RATES FOR REPAIRS & MAINTENANCE WORKS OF VARIOUS EQUIPMENTS

TEM NO.2 MV PANEL

ITEM 6 - TAF 2 DIESEL ENGINE WITH SPHL PUMP REPLACEMENT PARTS ON ENGINE SIDE

MACHINERY JOB TO ENGINE

MACHINERY ROLE TO PUMP

5 HP DIESEL ENGINE

Total Cost for Second Year

OPERATION & MAINTANANCE OF WATER SUPPLY SYSTEM FOR THIRD YEAR

Bill No. I: O&M Remuneration

Remuneration for Operation & Management of water supply in Water Supply Areas for a period of five years involving O&M of distribution network of DI, CI, PVC and MS pipes and fittings, sluice valves, air valves, scour valves, butterfly valves, bulk flow metres with transmitters, data loggers, booster pumping stations, submersible pump sets, house service connections, chlorination facilities, civil structures and conducting water quality testing and routine maintenance activities related to billing & collection system and customer service & support centre, including all management costs towards Contractor’s employees, labour, equipment, transport, communications, record keeping, reporting, taxes, duties etc., and all operating costs towards preventive maintenance, routine maintenance, periodical maintenance, emergency procedures, consumables, spares, service charges,uniform and safety equipments etc., complete.

Senior Engineer (Operations)

Distribution Engineer

Net work Assistants/Valve men

NRW Engineer/ Leakage reduction Engineer/ Water supply Pipeline Maintenance Engineer

NRW Technician

Billing Supervisor

Meter Readers/Data entry

Pump Operators

Labours

Security

NRW Equipment

Total Cost for Third Year, Rs

Bill No.II : House Service Connections

Providing House Service Connection as per the relevant Indian standard specifications, including cost of DI saddle, communication pipe GI Class B, water meter (IP68) with AMR compatibility, specials and fittings, fixing in position and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm to 25 mm HSC (Same side)

15 mm to 25 mm HSC (Opp side)

Supplying and Fixing of customer water meter (IP68) with AMR Compatibility, UPVC/MDPE pipes, collars, union, all materials including labour charges for threading, jointing and fixing

Total Cost for Third Year

Bill No. III: Pipes & HSC Repair works

Leakage deduction using leak deduction equipment and leak arresting & Repair of DI/HDPE/ PVC/ MDPE pipes using specials, inclusive of all activities, pipe cutting, threading, fixing in position and cost of excavation in all types of strata, dewatering, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm Dia to 40 mm Dia for House Service Connection (HSC)

100 mm Diameter, GI (K-7) distribution pipeline

150 mm Diameter, GI (K-7) distribution pipeline

200 mm Diameter, GI (K-7) distribution pipeline

250 mm Diameter, GI (K-7) distribution pipeline

300 mm Diameter, GI (K-7) distribution pipeline

350 mm Diameter, GI (K-7) distribution pipeline

400 mm Diameter, GI (K-7) distribution pipeline

450 mm Diameter, GI (K-7) distribution pipeline

500 mm Diameter, GI (K-7) distribution pipeline

600 mm Diameter, GI (K-7) distribution pipeline

700 mm Diameter, GI (K-7) distribution pipeline

800 mm Diameter, GI (K-7) distribution pipeline

Total Cost for Third Year

Bill No. IV: Repair and Maintenance of Electro mechanical items in Head Works

(INCLUDING SALVAGE VALUE)

IA. NATURE OF REPAIRS TO MOTORS

II.NATURE OF REPAIRS TO PUMP (CENTRIFUGAL) (1450RPM)

III. A. REPAIRS TO STARTERS

B. SWITCHES

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

V. CONTROL PANEL SPARES

2 to 5 HP - 1 to 10A

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

VI. A.OIL CIRCUIT BREAKER

VII. GENERATOR

A.ALTERNATOR

B. ENGINE

C. GENERATOR CONTROL PANEL

VIII. VALVES

A. SLUICE VALVE

B. NON RETURN VALVE

D. AIR RELEASE VALVE

IX. TRANSFORMER AND H.T.STRUCTURE

X. HT POLE STRUCTURE/ 4 POLE STRUCTURE

XI. CAPACITOR

XII. VACCUM PUMP

DRAIN PUMPSET

XIII. OTHER EQUIPMENTS

Servicing OHT Crane

Replacement of level indicator (Scale) with PVC plate, number and clamps etc.

OHT & UGT (LS)

LIGHTING EQUIPMENT

SAFETY EQUIPMENT

FIXING OF RATES FOR REPAIRS & MAINTENANCE WORKS OF VARIOUS EQUIPMENTS

TEM NO.2 MV PANEL

ITEM 6 - TAF 2 DIESEL ENGINE WITH SPHL PUMP REPLACEMENT PARTS ON ENGINE SIDE

MACHINERY JOB TO ENGINE

MACHINERY ROLE TO PUMP

5 HP DIESEL ENGINE

Total Cost for Third Year,Rs.

OPERATION & MAINTANANCE OF WATER SUPPLY SYSTEM FOR FOURTH YEAR

Bill No. I: O&M Remuneration

Remuneration for Operation & Management of water supply in Water Supply Areas for a period of five years involving O&M of distribution network of DI, CI, PVC and MS pipes and fittings, sluice valves, air valves, scour valves, butterfly valves, bulk flow metres with transmitters, data loggers, booster pumping stations, submersible pump sets, house service connections, chlorination facilities, civil structures and conducting water quality testing and routine maintenance activities related to billing & collection system and customer service & support centre, including all management costs towards Contractor’s employees, labour, equipment, transport, communications, record keeping, reporting, taxes, duties etc., and all operating costs towards preventive maintenance, routine maintenance, periodical maintenance, emergency procedures, consumables, spares, service charges,uniform and safety equipments etc., complete.

Senior Engineer (Operations)

Distribution Engineer

Net work Assistants/Valve men

NRW Engineer/ Leakage reduction Engineer/ Water supply Pipeline Maintenance Engineer

NRW Technician

Billing Supervisor

Meter Readers/Data entry

Pump Operators

Labours

Security

NRW Equipment

Total Cost for Fourth Year

Bill No.II : House Service Connections

Providing House Service Connection as per the relevant Indian standard specifications, including cost of DI saddle, communication pipe GI Class B, water meter (IP68) with AMR compatibility, specials and fittings, fixing in position and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm to 25 mm HSC (Same side)

15 mm to 25 mm HSC (Opp side)

Supplying and Fixing of customer water meter (IP68) with AMR Compatibility, UPVC/MDPE pipes, collars, union, all materials including labour charges for threading, jointing and fixing

Total Cost for Fourth Year

Bill No. III: Pipes & HSC Repair works

Leakage deduction using leak deduction equipment and leak arresting & Repair of DI/HDPE/ PVC/ MDPE pipes using specials, inclusive of all activities, pipe cutting, threading, fixing in position and cost of excavation in all types of strata, dewatering, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm Dia to 40 mm Dia for House Service Connection (HSC)

100 mm Diameter, GI (K-7) distribution pipeline

150 mm Diameter, GI (K-7) distribution pipeline

200 mm Diameter, GI (K-7) distribution pipeline

250 mm Diameter, GI (K-7) distribution pipeline

300 mm Diameter, GI (K-7) distribution pipeline

350 mm Diameter, GI (K-7) distribution pipeline

400 mm Diameter, GI (K-7) distribution pipeline

450 mm Diameter, GI (K-7) distribution pipeline

500 mm Diameter, GI (K-7) distribution pipeline

600 mm Diameter, GI (K-7) distribution pipeline

700 mm Diameter, GI (K-7) distribution pipeline

800 mm Diameter, GI (K-7) distribution pipeline

Total Cost for Fourth Year

Bill No. IV: Repair and Maintenance of Electro mechanical items in Head Works

(INCLUDING SALVAGE VALUE)

IA. NATURE OF REPAIRS TO MOTORS

II.NATURE OF REPAIRS TO PUMP (CENTRIFUGAL) (1450RPM)

III. A. REPAIRS TO STARTERS

B. SWITCHES

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

V. CONTROL PANEL SPARES

2 to 5 HP - 1 to 10A

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

VI. A.OIL CIRCUIT BREAKER

VII. GENERATOR

A.ALTERNATOR

B. ENGINE

C. GENERATOR CONTROL PANEL

VIII. VALVES

A. SLUICE VALVE

B. NON RETURN VALVE

D. AIR RELEASE VALVE

IX. TRANSFORMER AND H.T.STRUCTURE

X. HT POLE STRUCTURE/ 4 POLE STRUCTURE

XI. CAPACITOR

XII. VACCUM PUMP

DRAIN PUMPSET

XIII. OTHER EQUIPMENTS

Servicing OHT Crane

Replacement of level indicator (Scale) with PVC plate, number and clamps etc.

OHT & UGT (LS)

LIGHTING EQUIPMENT

SAFETY EQUIPMENT

FIXING OF RATES FOR REPAIRS & MAINTENANCE WORKS OF VARIOUS EQUIPMENTS

TEM NO.2 MV PANEL

ITEM 6 - TAF 2 DIESEL ENGINE WITH SPHL PUMP REPLACEMENT PARTS ON ENGINE SIDE

MACHINERY JOB TO ENGINE

MACHINERY ROLE TO PUMP

5 HP DIESEL ENGINE

Total Cost for Fourth Year,Rs.

OPERATION & MAINTANANCE OF WATER SUPPLY SYSTEM FOR FIFTH YEAR

Bill No. I: O&M Remuneration

Remuneration for Operation & Management of water supply in Water Supply Areas for a period of five years involving O&M of distribution network of DI, CI, PVC and MS pipes and fittings, sluice valves, air valves, scour valves, butterfly valves, bulk flow metres with transmitters, data loggers, booster pumping stations, submersible pump sets, house service connections, chlorination facilities, civil structures and conducting water quality testing and routine maintenance activities related to billing & collection system and customer service & support centre, including all management costs towards Contractor’s employees, labour, equipment, transport, communications, record keeping, reporting, taxes, duties etc., and all operating costs towards preventive maintenance, routine maintenance, periodical maintenance, emergency procedures, consumables, spares, service charges,uniform and safety equipments etc., complete.

Senior Engineer (Operations)

Distribution Engineer

Net work Assistants/Valve men

NRW Engineer/ Leakage reduction Engineer/ Water supply Pipeline Maintenance Engineer

NRW Technician

Billing Supervisor

Meter Readers/Data entry

Pump Operators

Labours

Security

NRW Equipment

Total Cost for Fifth Year

Bill No.II : House Service Connections

Providing House Service Connection as per the relevant Indian standard specifications, including cost of DI saddle, communication pipe GI Class B, water meter (IP68) with AMR compatibility, specials and fittings, fixing in position and cost of excavation in all types of strata, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm to 25 mm HSC (Same side)

15 mm to 25 mm HSC (Opp side)

Supplying and Fixing of customer water meter (IP68) with AMR Compatibility, UPVC/MDPE pipes, collars, union, all materials including labour charges for threading, jointing and fixing

Total Cost for Fifth Year

Bill No. III: Pipes & HSC Repair works

Leakage deduction using leak deduction equipment and leak arresting & Repair of DI/HDPE/ PVC/ MDPE pipes using specials, inclusive of all activities, pipe cutting, threading, fixing in position and cost of excavation in all types of strata, dewatering, refilling of trench and restoration to its original condition including disposal of surplus excavated material, as directed by the Engineer-in-charge.

15 mm Dia to 40 mm Dia for House Service Connection (HSC)

100 mm Diameter, GI (K-7) distribution pipeline

150 mm Diameter, GI (K-7) distribution pipeline

200 mm Diameter, GI (K-7) distribution pipeline

250 mm Diameter, GI (K-7) distribution pipeline

300 mm Diameter, GI (K-7) distribution pipeline

350 mm Diameter, GI (K-7) distribution pipeline

400 mm Diameter, GI (K-7) distribution pipeline

450 mm Diameter, GI (K-7) distribution pipeline

500 mm Diameter, GI (K-7) distribution pipeline

600 mm Diameter, GI (K-7) distribution pipeline

700 mm Diameter, GI (K-7) distribution pipeline

800 mm Diameter, GI (K-7) distribution pipeline

Total Cost for Fifth Year

Bill No. IV: Repair and Maintenance of Electro mechanical items in Head Works

(INCLUDING SALVAGE VALUE)

IA. NATURE OF REPAIRS TO MOTORS

II.NATURE OF REPAIRS TO PUMP (CENTRIFUGAL) (1450RPM)

III. A. REPAIRS TO STARTERS

B. SWITCHES

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

V. CONTROL PANEL SPARES

2 to 5 HP - 1 to 10A

7 to 12.5 HP - 32 A

15 to 30 HP - 63 A

40 to 50 HP - 100 A

VI. A.OIL CIRCUIT BREAKER

VII. GENERATOR

A.ALTERNATOR

B. ENGINE

C. GENERATOR CONTROL PANEL

VIII. VALVES

A. SLUICE VALVE

B. NON RETURN VALVE

D. AIR RELEASE VALVE

IX. TRANSFORMER AND H.T.STRUCTURE

X. HT POLE STRUCTURE/ 4 POLE STRUCTURE

XI. CAPACITOR

XII. VACCUM PUMP

DRAIN PUMPSET

XIII. OTHER EQUIPMENTS

Servicing OHT Crane

Replacement of level indicator (Scale) with PVC plate, number and clamps etc.

OHT & UGT (LS)

LIGHTING EQUIPMENT

SAFETY EQUIPMENT

FIXING OF RATES FOR REPAIRS & MAINTENANCE WORKS OF VARIOUS EQUIPMENTS

TEM NO.2 MV PANEL

ITEM 6 - TAF 2 DIESEL ENGINE WITH SPHL PUMP REPLACEMENT PARTS ON ENGINE SIDE

MACHINERY JOB TO ENGINE

MACHINERY ROLE TO PUMP

5 HP DIESEL ENGINE

Total Cost for Fifth Year,Rs.

Bill No.V: NRW Reduction (Active Leakage Control)

Conducting Initial NRW calculations and establishing the base line NRW, preparing NRW reduction action plan for reducing Commercial & Physical losses

Uthandi WDS

Okkium Thoraipakkam WDS

Total Cost for Fifth Year, Rs.

Sub Total for 5 years (excluding GST)