ADDN / ALTN OF KITCHEN AND TOILETS OF MD ACCN AND CONNECTED B/R WKS AT BANA SINGH ENCLAVE AND PROVN OF HARD STANDING WITH INTERLOCKING TILES IN ECHS POLYCLINIC DUNDAHERA (GURGAON) UNDER AGE B/R-II OF GE SOUTH DELHI CANTT-10

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L for joint free glazed ceramic coloured tiles as in vertical surface 300x600 mm 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10 mm thick backing coat in cement mortar 1:4, complete all as specified and as directed.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed by engineer-in-charge.

M&L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) as in steps ,jambs, pillars, window-cills, cooking platforms including 20 mm thick screed bed cement screed bed 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 18-20 mm thick, over and including 20mm thick cement screed bed, in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.

M&L for Kota stone slab 18- 20mm thick, as in riser of steps, skirting, dado and pillar, laid 15mm thick plaster 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stoneworkcomplete all as specified and directed.

M&L for old size brick work with flyash bricks straight or curved on plan exc. 6 m mean radius built in cement mortor 1:6, complete all as specified and as directed.

M&L for half brick work old size Brick work with sub class 'B' bricks strainght or curved on plan to any radius in cement mortar 1:4, complete all as specified and as directed.

Supplying and fixing 20 mm bore UPVC pipes SDR 11, plain and brass threaded CPVC SCH-40 fittings such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union flange and tank adaptor, on walls / ceiling or laying in floors/wall, including taking down of existing GI tubing 15mm dia and connection complete all specified and as directed.

Supplying and fixing 25 mm bore UPVC pipes SDR 11, plain and brass threaded CPVC SCH-40 fittings such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union flange and tank adaptor, on walls / ceiling or laying in floors/wall, including taking down of existing GI tubing 15mm dia and connection complete all specified and as directed.

S&F 500 ltr capacity rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank of capacity exceeding 250 litres but not exceeding 500 litres, complete all as specified and as directed.

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe of 25mm bore and fixed, complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore, complete all as specified and as directed.

S&F PVC connections 450 mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and as directed.

S&F in repair 15 mm angle valve/stop valves, cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch and butter fly handles , screwed with pipes or for union, complete all as specified and as directed.

S&F in repair two way CP brass Bip Cock 15mm dia with single handle and wall flange complete all as specified and as directed.

S&F in repair 15 mm bore WHB mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore Sink mixer chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed.

S&F in repair brass chromium plated overhead shower rose 125 mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, 'D' type 60cm long between flanges of brass CP, complete all as specified and as directed.

S&F in repair stainless steel sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F Health Faucet (ABS Body) chromium plated suitable for 15 mm bore pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F corner glass assmbley with stainless steel railing, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan with P or S trap (pedestal pattern) , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and as directed.

S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltr capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and as directed.

Taking down and Refixing of shutters of size exc 1.00 sqm but n exc 2 sqm in same or other opening including all necessary adjustments to fit the shutter with frame like easing of shutter for easy closing /opening, tightning of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as specified and directed.

Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

M&L for factory made pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

M&L for factory made pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

M&L for Cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in back filling, holdfasts etc, complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneer on both faces with lipping/ frame to match including fixing of wooden beading complete all as specified and as directed.

S&F 100mm butt hinges, medium weight ,cold rolled mild steel all as complete all as specified and as directed.

S&F in repair for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Dismantling wrought iron or mild steel / cast iron work of any description (steel window & Grill) complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board of required size for WC/Bathroom/Toilet/Kitchen and Cabinets, comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as per direction of GE. Note :- (a) Pattern & design of WPC board to be decided by GE. (b) Items like, magnetic Catcher, cupboard 100mm SS handle, and CP Clip/continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap (when open) is 30mm, Haps & Staple deemed to be included in the quoted rate.

S&F in repair 25 mm dia SS curtain rod AISI 304 (minimum wall thickness 1.6mm), with fixing brackets, bulbs, side knobs as approved complete all as specified and as directed.

M&L for welding in repairs exceeding 2.5 cm but not exceeding 5.0 cm in length thickness of metal be welded exc 6 mm but not exceeding 9mm, complete all as specified and as directed.

S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 750mm x 750mm x 250mm, complete all as specified and as directed.

S&F in repair stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section complete all as specified and as directed.

S&F in repair stainless steel AISI 304 grade handle of size 200mm long,etc., complete all as specified and as directed.

S&F in repair Stainless steel of AISI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and as directed.

M&L for rendering 15 mm thick with ready mix plaster on wall surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for rendering 15 mm thick with ready mix plaster on wall brick or concret surface/ other than fair faces surfaces finished even and smooth without using extra cement, complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for waterproof cement based putty of average thickness 1-2 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust etc, by skilled labor as per following steps :- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI. Step 3 :- Allow 6-8 Hrs time to dry the putty surface.

M&L for applying two coat of super quality weather proof exterior emulsion paint over and including one coat of primer using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with Pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M&L for rendering 10 mm thick with ready mix plaster on wall surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for two coats of oil bound distemper on walls including preparation on new surfaces including a coat of primer and applying 1-2 mm average thickness of wall putty on walls to give uniform surface including sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour, complete all as specified and as directed.

M&L for complete removal of existing surface and applying two coats of oil bound distemper on walls including preparation of surfaces including a coat of primer and applying 1-2 mm average thickness of wall putty on walls to give uniform including sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour, complete all as specified and assurface complete all as specified and as directed.

M&L for rendering 5 mm thick with ready mix plaster on ceiling surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling complete all as specified & as directed.

M&L for preparation old surfaces including complete Removal of existing surface of white wash and applying two coats of white wash on ceiling complete all as specified & as directed.

Cutting of vegetation/scrubs plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified & as directed.

S&F cast iron soil, waste and vent pipes (sand cast) 100 mm bore in any length with or without ears with cement joints fixed to walls/laid in trenches or in floor duly apply a coat of bitumenous black paint including dismantling of cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100 mm complete all as specified and as directed.

All as per srl item No 66.00 here-in-before but 75mm bore pipes.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door/Tee, union etc complete all as specified & as directed.

All as per srl item No 68.00 here-in-before but 75mm bore pipes.

S&F Stack clamps made out of 50mm by 5mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe complete all as specifiecd and as directed.

S&F Stack clamps made out of 50mm by 5mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specifiecd and as directed.

S&F Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 75mm bore (fixed in repairs) complete all as specifiecd and as directed.

S&F Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 100mm bore (fixed in repairs) complete all as specifiecd and as directed.

S&F cast iron vent cowl for 100mm bore pipe complete all as specifiecd and as directed.

S&F cast iron floor trap/nahani trap 75 mm, with grating including jointing to waste pipe complete all as specifiecd and as directed.

S&F 125mm x 100mm salt glazed stone ware gully traps square & round mouthered trap 'P' including case iron grating and fixed, including necessary excavation and earthwork, concrete in bed, surrounds, kerbs etc., and jointing to drains in cement mortar 1:1, complete all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall including dismantling of existing SWR/PVC/Salt glazed ware/AC or reinforced concrete pipe set in cement mortar etc. complete all as specified and as directed.

S&F PVC (SWR) bend any radius for 110mm bore pipe complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight, complete all as specified and as directed.

M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement completed all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/ loose soil and getting out including clearing all grass vegetation, saplings, shrubs, brush woods under growth roots and trees exceeding 30 cm girth, complete all as specified and as directed.

M & L for hardcore of brocken stones or boulders guage not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled by roller/rammed/cmpaction complete all as specified and as direected.

M&L for Cement concrete 100 mm thick 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base to floors finished fair and even complete all as specified and as directed.

M & L for 60 mm thick M-35 grade machine pressed precast concrete fully coloured glossy finished interlocking paver block any shape and size, with grey cement and pigment to match, confirming to IS 15658-2006, laid over and including 40 mm thick sand cushioning complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops; rounded or chamfered on edges complete all as specified and as directed.

Material and labour for pre-cast cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb stone (factory made) on road and path including exavating in line n.exc 20cm in width and 30cm deep with 50mm thick PCC 1:4:8 in sub base of exavated area lay/fix the curve stone over PCC and packing the same duly retuning filling and pointing the gaps between curve stones with grey cement complete all as specified and as directed

M&L for preparation of new or previously untreated plastered or concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of primer complete all as specified and as directed.

Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.

M&L for concealed point wiring complete with standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable drawn through drawn through Existing concealed PVC conduit wiring in wall not less than 25mm dia and including replacement of UNSV pressed steel terminal Boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one light/Fan/Bell point controlled by one 5 Amp one way using cable (1.5 Sqmm for phase and neutral and 1.5 sqmm for earthing). Note:- (i)The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete. (ii) In existing conduit wiring new conduit will be added where there is a blockage/damage to the existing conduit including bends/elbows/tees/ Junction boxes.).

All as per item No 91.00 here-in-before but One 3 pin socket outlet, 5/6 Amps, independent board and through new conduit complete all as specified and as directed.

All as per item No 91.00 here-in-before but for one socket outlet 5/15 Amps on Independent board independent board and through new conduit with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete all as specified and as directed.

S & F Switch Modular type switch, 6 A 1- way 1 Module switch with finger proof terminal complete all as specified and as directed.

S & F modular type 2/3 pin combined shuttered type 6A socket 2 Module complete all as specified and as directed.

S & F Switch Modular type switch, 16 A 1- way 1 module switch with finger proof terminal complete all as specified and as directed.

S & F modular type 2/3 pin combined shuttered type 16 A socket 2 Module, complete all as specified and as directed.

S & F ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and as directed.

S & F 20 Watt surface / wall mounted LED batten capable of delivering minimum 2000 lumen having PC diffuser luminius efficincy not less thn 115 lumen/Watt CRI>80% PF>0.9,CCT 6500K indeoendent isolated SPMS based constant current electronic LED driver with THD < 10% surge protection nd other safety tests as per IS 15885( Part-2/Sec-13) : 2012 polycarbonate diffuser housed in power coated white extruded aluminium channel housing , white coloured ABS end caps IP 20protection input voltage range 140-270V input fequency 50-60Hz including electrical connection with 3 core flexible Cooper Cunductor cable of Appropriate size from ceiling rose to the fixture complete all as specified and as directed.

S & 10 Watt surface / wall mounted mirror LED batten capable of delivering minimum 1150 lumen having PC diffuser luminius efficincy not less thn 115 lumen/Watt CRI>80%, PF>0.9,CCT 6500K indeoendent isolated SPMS based constant current electronic LED driver with THD < 10% surge protection nd other safety tests as per IS 15885( Part-2/Sec-13) : 2012 polycarbonate diffuser housed in power coated white extruded aluminium channel housing , white coloured ABS end caps IP 20protection input voltage range 140-270V input fequency 50-60Hz including electrical connection with 3 core flexible Cooper Cunductor cable of Appropriate size from ceiling rose to the fixture complete all as specified and as directed.

S&F in replacement LED 12 Watt LED Bulb complete all as specified and as directed.

S&F Exhaust Fan, Metal body, 300 mm Sweep copper wound, 1400 RPM with metal louver and connecting up with replacement of cable T/C flexible cable of size:- 1.50 Sqmm from ceiling rose / connection to fan including taking down of old exhasut fan and depositing to MES store yard complete all as specified and as directed.

Supply and fixing 25 Ltr Geyser with Tank marine grade Galss Line Coating 5 Star with Adjutable thermostat, Efficient long life copper heating element with warranty 3 yrs Shock-resisitent and rust proof engineering thermoplastic body IPX4 waterproof technology having fire retardant cable with 16A plug, Tank designed to withstand 8 bar pressure including Hot & Cold PVC and holding clamp with fastner of suitable size complete all as specified and as directed. Note :(i) Existing old geyser to be taken down from wall and deposit to the MES Yard for custody. (ii) Electric switch for geyser of 16 Amps shall be provided on main switch board of the bathroom.

S&F PVC Connection with brass nipple 15mmx600 mm long with ISI marked suitable for hot and cold water of 25 Litr capacity of geyser as hot and cold water connecetion complete all as specified and as directed.

Supply and fixing exhaust fan sturdy enginnering plastic complete with louvers shutter voltage 230V, 50Hz copper winding, 1200 RPM of 250 mm sweep complete all as specified and as direcetd

M&L for opening of hole through out the wall as suitable for exhaust fan of size 250 mm sweep and making good to disturbed surface as per existing complete all as specified and as direcetd.

M R INTERIOR HUB (BID ID -3378025)

M/S CHANDER MUNI (BID ID -3378907)

M/S HARINDER SINGH (BID ID -3378325)

innovision limited (BID ID -3378272)