Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
22 Aug 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CH.MANAGER
Power Grid Corporation of India Limited Northern Region I Regional Headquarter SCO Bay No 5 to 10 Sector 16A Faridabad 121002
Construction of RCC Road for Movement of Line Reactors at 765/400 kV Ajmer Substation
Rfx:5002002301
Open
Civil Works - Roads
Works
765/400 kV POWERGRID Ajmer Substation
₹2,500
₹1.5 L
25 Jul 2022
25 Jul 2022
24 Aug 2022
25 Jul 2022
22 Aug 2022
25 Jul 2022
8 Aug 2022
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road rollerincluding making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns
Providing and laying C.C. pavement with reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound.
Supplying and laying plastic sheeting 125 micron thick
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Cement Morter
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Months
: Package - :
Sole Bidder
Sole Bidder
Printed Name :
Printed Name :
Sole Bidder
Equivalent US$ (in Million)
exchange rate*
exchange rate*
Equivalent US$ (in Million)
Audited Balance Sheet and Income Statements enclosed
Printed Name :
Company incorporated & registered in [Name of countries]
[Name of Countries]
Printed Name :
[Name of Countries],
Item Description
Printed Name :
Printed Name :
Quantity proposed to be bought/sub-contracted
Quantity proposed to be supplied
Printed Name :
Quantity proposed to be bought/sub-contracted
Printed Name :
Details of the proposed sub-contractor/sub-vendor
Printed Name :
Quantity proposed to be bought/sub-contracted
Quantity proposed to be supplied
Printed Name :
Quantity proposed to be bought/sub-contracted
Printed Name :
Deviation
Printed Name :
Deviation
Printed Name :
Printed Name :
Period in months from the effective date of contract
Printed Name :
Printed Name :
Date of Retirement/ resignation from POWERGRID
Printed Name :
Printed Name :
Printed Name :
Printed Name :
Printed Name :
Details of Contract and date
Details of Transgression of Integrity Pact by the bidder
Estimated completion date
Projection for next five years
Printed Name :
Description of item on which applicable
Printed Name :
Power Grid Corporation of India Ltd.,
Northern Region–I, Regional Headquarter,
Date of Retirement/ resignation from POWERGRID
Printed Name :
Date of Retirement/ resignation from POWERGRID
Printed Name :
Printed Name :
having its Registered Office at
Printed Name :
eight
thirteen
the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently).
Bank Draft
Banks certified Cheque
Bank Guarantee
Applicable
Governing Law
Contractor’s Responsibilities
Terms of Payment
Performance Security
Taxes and Duties
Completion Time Guarantee
Defect Liability
Functional Guarantee
Patent Indemnity
Limitation of Liability
Settlement of Disputes
Arbitration
Price Adjustment
Printed Name :
To be submitted in Soft Copy.
Duly Filled Excel Sheet of Attachment and Bid Form to be uploaded in Soft Copy along with Bid.
Duly notarized (on Stamp Paper of requisite value), indicating that the person(s) signing the bid has(ve) the authority to sign the bid In case of bid submitted by a Joint Venture of two or more firms as partners, if allowed as per stipulated Qualification Requirements in Annexure-A (BDS), bidder shall submit. Power of Attorney for Joint Venture and Joint Venture Agreement as per given format
Duly notarized (on Stamp Paper of requisite value)
₹NIL; Demand Draft or Online Payment Acknowledgement towards the cost of Bidding Documents pursuant to ITB 5.4
In case of UAM/ Udyam Registration, Bidder has to submit the Complete Audited Account Statements (Balance Sheet and Profit and Loss Account) for verification purpose.
On Manufacturer’s Letterhead, see Clause 9.3(i) of the ITB (The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent)
To be submitted on a non-judicial stamp paper of Rs. 100/-. (in two originals, Signed on each page by Power of Attorney Holder and duly witnessed)
To be submitted on a non-judicial stamp paper of Rs. 100/-. (in two originals, Signed on each page by Power of Attorney Holder and duly witnessed)
Signed by CEO/Managing Director/Company Secretary/ Director/ CFO/ any of the partner in case of partnership firm/ any other officer entrusted with substantial powers of the management of the affairs of the company/firm and POA Holder
On Firm/Company's Letterhead
On Firm/Company's Letterhead
On Firm/Company's Letterhead
Annual Reports for FY 2016-17, FY 2017-18, FY 2018-19, FY 2019-20, FY 2020-21
To be submitted on a non-judicial stamp paper of Rs. 100/-.
To be submitted in Soft Copy.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
01-Section - I IFB SSTE Vol-I.docx
docx • 0.04 MB
02 Section - II ITB SSTE civil(Feb 2019).docx
docx • 0.09 MB
03 Section - III_BDS Civil.docx
docx • 0.06 MB
04-Annexure-A (BDS)QR.doc.docx
docx • 0.03 MB
05-Section-IV-GCC-civil works(Feb 2019).doc
doc • 0.37 MB
06 Section - V SCC Civil Vol-I.docx
docx • 0.06 MB
08-Appendix-I to SCC.doc
doc • 0.24 MB
09-Section - VI Forms and Proceedures Civil.docx
docx • 0.12 MB
Drawing.pdf
pdf • 0.18 MB
Sample BOQ for RCC Road at Ajmer.xls
xls • 0.04 MB
SFQP.pdf
pdf • 2.19 MB
TS.PDF
pdf • 0.19 MB
01-First Envelope Attachments and Bid Form.xlsx
xlsx • 1.34 MB
02-Attachment-3-Bidder Eligibility.doc
doc • 0.04 MB
02-Attachment-3-Bidder Eligibility.doc.docx
docx • 0.02 MB
03_Attachment-8- Manufacturers Authorization Form.DOC
doc • 0.06 MB
03_Attachment-8- Manufacturers Authorization Form.DOC.docx
docx • 0.03 MB
04_Attachment 19-KMP Declaration.doc
doc • 0.04 MB
05_Attachment 21-Affidavit for correctness.docx
docx • 0.02 MB
06_Attachment 22 Declaration regading event encountered.docx
docx • 0.03 MB
07_Attachment 23 Certificate by bidder for DOE order.docx
docx • 0.02 MB
08_Attachment 24_Affidavit for self-certification_PPP - MII Order.docx
docx • 0.02 MB
11_Checklist.xlsx
xlsx • 0.01 MB
11_Legends for Units.pdf
pdf • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .