Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.9 L+₹2.8 L (15.3%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹21.9 L+₹3.7 L (20.6%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹22.6 L+₹4.5 L (24.7%)Rejected-AOC GALA NO B 128 129 130 SATYAM INDUSTRIAL ESTATE OFF KARVE ROAD OPP SNDT COLLEGE ERANNDWANE PUNE 411038 PUNE MAHARASHTRA 411038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-AOC L4 |
Tender Value
₹25.5 L
EMD Value
₹51,000
Closing Date
29 Jun 2020, 6:00 pmClosed
GE (AF) LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
REPAIR MAINT OF CENTRAL AC PLANTS PACKAGE TYPE AC PLANT COOLING APPLIANCE SPLIT WINDOW AC WATER COOLER REFRIGERATORS DEEPFREEZER, DESERT COOLER VOLTAGE STABILISERS AND MISC ITEMS AT 09 BRD AT AF STN PUNE
2020_MES_351594_1
8383/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) LOHEGAON
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LOHEGAON
₹51,000
Yes
11 Aug 2020
10 Jun 2020
1 Jul 2020
10 Jun 2020
29 Jun 2020
17 Jun 2020
Amount
REPAIR & MAINT OF CENTRAL AC PLANTS, PACKAGE TYPE AC PLANTELECTRIC PANELS M&L for servicing, cleaning & greasing of AHU with complete accessories such as cooling coil, air filters, greasing of blower motor, blower/drum, blower shaft, checking of electric control cable connections & cleaning of Pot Strainer/Y strainer of chillier/condenser line including replacement of strainer jail if required etc. up to satisfaction of Engr in Charge and complete all as specified and directed.
M&L for descaling of condenser (up to 18 TR) with dilute sulphuric acid solution (as per OEM manufacturers specification) by using decaling pump for circulation of solution and brushing with nylon brush by opening both side covers and cleaning/flushing out the dirt, sludge with water up to satisfaction of Engr in charge and re-fixing the side cover with new gasket, replacement of worn out nut, bolts & washers and leak detection complete all as specified and directed.
M&L for decaling of condenser (24 to 100 TR) with dilute sulphuric acid solution (as per OEM manufacturers specification) by using decaling pump for circulation of solution and brushing with nylon brush by opening both side covers and cleaning/flushing out the dirt, sludge with water up to satisfaction of Engr in charge and re-fixing the side cover with new gasket, replacement of worn out nut, bolts & washers and leak detection complete all as specified and directed.
Replacement of unsv V belts with new V belts ISI marked of compressor & AHU as per existing size & type complete all as specified and directed.
M&L for servicing of compressor by disconnecting /detaching from motor after pump down the system and taking out the parts after strip opening of compressor (Make: ACCEL, 4x65L 18 TR ) Cleaning the parts of compressor & segregation of serviceable/unserviceable parts, keeping serviceable parts aside for reuse and replacing the worn out parts (taken as supply only), turning, lathe work on crank shaft if required, Reassembling the complete compressor parts, including checking leak test by using nitrogen pressure test at suitable pressure, vacuumed the compressor by using vacuum pump & filling oil and charging of gas R-22, testing and commissioning of complete system as per OEM specification complete all as specified and directed by Engr in charge. Note: (i) Work shall be carried out through OEM Mechanics or Mechanic having 10 Years experience of repair of the compressor. (ii) Unserviceable nut, bolts, washers, springs etc. found unserviceable will be replaced and deemed to be included in the job work rate. (iii) Major spare parts, compressor oil and Frozen gas shall be measured and paid separately
Supply only of following spare parts of the compressor Make: ACCEL, 4x65L
Cylinder liners with unloading ring with pin, washers, gasket
Piston set with piston rings and piston pin
Connecting rod with CR bush and bearing.
Suction/ Discharge valve assembly complete.
Shaft seal assly complete
O' ring set.
Gasket set.
Heater assembly
Heater
SV and DV reed set
Oil pressure regulating valve
Oil filter assembly
Filter Bag
Aluminium washer set
Coil for solenoid valve
solenoid valve
Cut Out LP HP
Loading unloading frame
Gear wheel & Neoprinence O ring of Oil pump
coupling for oil pump
crank shaft
M&L for replacement or top-up of u/s burnt compressor oil and charging with new lubricant oil for open type reciprocating compressor(4x65L Make- Accel) as per manufacturer's standard instruction complete all as specified and directed. Make - Servofriz-68 of Indian Oil Corpn. Ltd /Freezol- 68 of Bharat Petroleum
M&L for charging of Refrigerant gas R-22 gas as per manufacturers instruction complete all as specified and directed.
M&L for charging of Refrigerant gas R-134a gas as per manufacturers instruction complete all as specified and directed.
S&F and replacement of HP/LP control switch for ACCEL make compressor of AC plant capacity up to 36 TR as per existing make complete all as specified and directed.
M&L for servicing, cleaning of Cooling tower up to 100TR Cap, cleaning the storage tank, removal of all sludge , servicing, greasing of cooling tower motor, and with hub assembly etc. complete all as specified and directed.
M&L for replacement of Unsv solenoid valve by proper pump down the refrigerant and brazing as required at site complete all as specified and directed by Engr in charge Make-Castel (MOPD 275 SEP-500)
M&L for servicing of Main Electric Panel board/Control panel board of Central/Package type AC Plant by cleaning the panel with blower, replacement of Unsv burnt wire, cables with existing size & length including proper numbering, replacement of u/s fuse link, lugs, washer, nuts, bolts, checking proper electrical connection, connectivity, cleaning of contactors by contact cleaner etc. & find out defective parts and making the panel functional by replacing the Unsv item (taken as supply only) as directed by Engr-in-charge. Note: (i) Unserviceable parts as MCB, MCCB, contactor, relay, MPD, etc. will be measure and paid separately. Minor parts like thimbles, tags, nut, bolts, washers etc. shall be deemed to be included in item rate.
Supply only of the following for above items complete all as specified and directed. (Make- Hager/C&S/L&T/ Schneider/Siemens
MCB 6-32 Amp SP C series
MCB TPN 40 to 63Amp C series
MCB TPN 10 to 32 Amp C series
MCCB-400 amps current carrying capacity 36 KA, AC 415 Volts four pole model as per existing
Add on Auxiliary contact block (MNX A-2 /MNX A-1/TA1-DN22/LAN-11)
HRC fuse link RH type having breaking capacity 80 kA ( 2-32 amps)
Fuse bases for HRC fuse up to 32 Amp
Contactor 3 phase having current rating 9 to 12 A
Contactor 3 phase having current rating 18 to 22 A
Contactor 3 phase having current rating 25 to 32A
Contactor 3 phase having current rating 40 A
Contactor 3 phase having current rating 70A
Thermal Over Load Relay (Auto/Manual reset) suitable for contractors (Relay range 2.5-t to 9-13 Amps )
Thermal Over Load Relay (Auto/Manual reset) suitable for contractors (Relay range 23-32 to 30-40 Amps )
PVC connector 15 to 60 Amps
Electronic Timers 110/240/360/415Volts 50 Hz for (3-10/ 9-30/36-120 Sec)
Single phase preventer suitable for 3 HP to 25 HP Elect motor sets (Make Minilic)
R/Y/B Phase/On/Trip indicating lamps (as per colour code)
Relay (Salzer Mkg 3P)
S/F thermostat expansion valve make- SPORLON / ALCO type HVE -16 CP 100 suitable for capacity up to 18 TR complete all as specified and directed.
M&L for replacement of butter fly valve 100mm dia including taking out existing Unsv butter fly valve and making good to the disturbed surface matching to existing specification complete all as specified and directed.
M&L for replacement of unsv pot strainer 100mm including replacement of unsv rusted nut bolts, washers, & gasket complete all as received at site & directed by Engr in charge.
M&L for replacement of unsv HEPA filters 0.3 Micron, flanged type EU-13, having Aluminium MOC casing, imported submicron glass fibber paper filter media , filtration efficiency 99.997% down to 0.3 micron, of size 610x610x545x545x305mm, Air flow 2000CFM , 25mm WC initial pressure drop & 60mm WC final pressure drop complete all as specified and directed by Engr in Charge Make:- Spectrum Filtration / Dina Filter Pvt Ltd/ United filters/National Filter
M&L for replacement of unsv HEPA filters 0.3 Micron, flanged type EU-13, having Aluminium MOC casing, imported submicron glass fibber paper filter media , filtration effiency 99.997% down to 0.3 micron, of size 610x305x545x240x305mm, Air flow 1000CFM , 25mm WC initial pressure drop & 60mm WC final pressure drop complete all as specified and directed by Engr in Charge Make:- Spectrum Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
M&L for replacment of unsv flanged type combination filter EU4+EU-5 grade, having Aluminium MOC casing, HDPE+NW+AL Mesh fileter media , filtration effiency 95% down to 5 Micron, size 305x610x240x545x380mm, Air flow 1000CFM , 10.5-12.5mm WC initial pressure drop &45mm WC final presure drop complete all as specified and directed by Engr in Charge Make:- Spectrun Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
M&L for replacment of unsv flanged type combination filter EU4+EU-5, having aluminum MOC casing, HDPE+NW+AL Mesh fileter media , filtration effiency 95% down to 5 Micron, size 610x610x545x545x380mm, Air flow 1000CFM , 10.5-12.5mm WC initial pressure drop &45mm WC final presure drop complete all as specified and directed by Engr in Charge Make:- Spectrun Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
M&L for replacment of unsv flanged type EU-4 grade Filters, having aluminum MOC casing, HDPE+NW+HDPE Mesh fileter media , filtration effiency 90% down to 10 Micron, size 230x535x50mm, Air flow 1000CFM , complete all as specified and directed by Engr in Charge Make:- Spectrun Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
M&L for replacment of unsv flanged type EU-4 grade Filters, having aluminum MOC casing, HDPE+NW+HDPE Mesh fileter media , filtration effiency 90% down to 10 Micron, size 535x535x50mm, Air flow 1000CFM , complete all as specified and directed by Engr in Charge Make:- Spectrun Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
M&L for replacment of unsv flanged type EU-4 grade Filters, having aluminum MOC casing, HDPE+NW+HDPE Mesh fileter media , filtration effiency 90% down to 10 Micron, size 305x305x50mm, Air flow 1000CFM , complete all as specified and directed by Engr in Charge Make:- Spectrun Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
M&L for replacment of unsv flanged type EU-4 grade Filters, having aluminum MOC casing, HDPE+NW+HDPE Mesh fileter media , filtration effiency 90% down to 10 Micron, size 610x610x50mm, Air flow 1000CFM , complete all as specified and directed by Engr in Charge Make:- Spectrun Filtration / Dyna Filter Pvt Ltd/ United filters/National Filter
Testing of clean room-05 nos & Passage 01 Nos for verify the clean room requirment as per ISO- 8 in operation complied as per ISO- 14644. Testing of clean rooms shall be carried out through testing equipmets meeting the requirment of ISO 21501-4-2007 and calibrated from National Institute of Standard and Technology (NIST) only. Note: (i) Test report to be submit in triplicate. (ii) Testing shall be carried out through ISO 9001.205 Certified companey
M&L for outside duct thermal insulation class 'O ' nitrile rubber based thermal insulation 6mm thick with treated woven glass fiber covering of 0.18mm thick, density of 200+20 GSM, Tensile strength 275+-25 Kg/mm for exposed to sun application (green/blue colour) including fixing with adhesive which is specifically formulated for duct insulation which shall be free from benzene and joints shall be fixed with glass cloth foil based tape with self adhesive ability to ensure 100% leak proof, complete all as specified by OEM & directed by Engineer-in-Charge. Make - Armacell/Vidoflex/Eurobatex. Note: Rates quoted are deem to be included for necessary temp staging reqd for fixing of insulation nothing extra shall be paid.
M&L for replacment of strip heaters 3 KW consisting of stainless steel sheathing having heat resistant chrome-nickel 80/20 element protected under best insulation to avoid the leakage of current and with screwed type terminal at one end, 240 volts, AC, 50Hz, single phase complete including taking out existing unsv heater from duct, AHUs complete all as specified and directed by Engr in Charge Make: Daspass/Rapid Cool
M&L for quarterly servicing of (2x 100 TR Running + 1x 100 TR as standby) screw type water cooled chiller unit by OEM service Engineer including cleaning of electric control panel & its parts, chiller units parts, checking all parameters of Microprocessor, MPD and other controls including repair if reqd and setting the parameters as per design and outside conditions, descalling of condenser and submission of service report to Engr in Charge Make of installed AC plant-Voltas Model- ACEGWFXR1001MLC242
M&L for replacment of unsv rubber star coupling of back pull out type pump set including making proper alignment and greasing of the pump & motor complete all as specified and directed by engr in Charge
Incomer Feeder : 250A , 25kA, TPN MCCB Outging Feeders : (a) For AHU 44000 CFM Cap (i) 1x 6KW Heater bank (ii) 3 x 9KW heater bank (iii) 1x 6KW Pan type humidifire. (b) For AHU having 22000 CFM cap:- (ii) 1x 6 KW heater bank (ii) 1x12 KW heater bank, (iii) 3x 9 KW Heater bank (iv) 1x 6KW pan type hunidifire (c) For AHU having 14000 CFM cap:- (i) 1x 6 KW Heater bank, (ii) 2x 12KW heater bank, (iii) 3x 9 KW heater bank, (iv) 1x 6KW pan type humidifire
M&L for carefully cutting the existing ducting with insulation, and making on site fabrication, modification of existing duct for fixing of automatic Fire damper complete with smoke detector/thermister and Motorized actuator as required for operation, including necessary control wiring and interlocking with AHU complete all as specified. The fire dampers shall be shall be tested as per ULL- 555 and certified by CBRI complete all as specified and directed by Engineer in Charge. Note :-(i) Size of existing ducting : 2500(W)x1000 (H)mm (ii) Rates quotes are included for necessary staging for fixing of fire damper nothing extra shall be paid.
Replacment of unsv humidistat with digital type humidistat with controller and wire to monitor humidity including interlocking with humidifire & dehumidifire complete all as specified and directed by Engr in Charge Make : Siemens /Honeywell
REPAIR & MAINT OF COOLING APPLIANCE, SPLIT/WINDOW AC, WATER COOLER, REFRIGERATORS, DEEPFREEZER, DESERT COOLER, VOLTAGE STABILISERS AND MISC ITEMS
M&L for Servicing, cleaning of complete unit (indoor and out door) of air cooled split type AC any capacity by using blower, cleaning of condenser coil with water, checking all the parts, electrical connection , cleaning the air filters, combing of fins by using fins comb including replacing defective filters, burnt wiring, tightening of electric wiring connections, etc., complete all as specified and directed.
M&L for replacement of micro processor printed circuit board complete suitable for split type ACs as suitable for existing make/model up to 2 TR Cap complete all as specified and directed by Engr-in-charge.
M&L for taking out the motor from swinging system of AC any type of indoor unit with rubber roller and replacing with new motor of suitable for the existing make/model and capacity all as specified and directed.
M&L for replacement of hermetically sealed unit with new Compressor by dismantling any taking out the old u/s burnt out Compressor of split type Air Conditioner, including replacement of bushes, sleeves, washers nut and bolt, relay terminal cover, clips reqd for fixing of new compressor including cutting, brazing of copper piping, charging of suitable refrigerant gas as required Qty to obtained desired cooling, carry out leak test etc., all as required at site complete commissioning, testing for the following capacity:- Make: Kirloskar/ Samsung/Voltas/Blue star/Carrier
Capacity 1.5 TR
Capacity 2.0 TR
M&L for replacement of existing old U/S insulation of refrigerant pipes of split air conditioner up to 2 TR cap all as specified and directed.
M&L taking out defective micro processor printed circuit board of split type AC of existing Make/Model up to 3 TR Capacity for repair and refixing to its original place after carry out necessary repair and testing complete all as specified and directed by Engr-in-charge.
M&L for leak detection in refrigerant system of AC by using nitrogen pressure test, cutting brazing, making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas as required quantity to achieve desire cooling complete all as specified an directed-
Split type AC 1.5 TR capacity
Split type AC 2.0 TR Capacity
M& L for replacement of condenser fan/blower motor as per existing make and model suitable for following Capacity including testing after replacement complete all as specified and directed.
Motor suitable for 1.5 TR Capacity
Motor suitable for 2.0 TR capacity
M&L for replacement of unserviceable fan blade of condenser unit of split type AC up to 2 TR as per existing make and model complete all as specified and directed by Engr-in-charge.
M& L for replacement of unserviceable hermetically sealed compressor with new Compressor suitable for window type AC of following capacity, including replacement of unserviceable bushes, sleeves, washers nut and bolt for 4/3 Compressor foundation legs including relay terminal cover and clips on and including cutting, brazing, leak detection, charging of suitable refrigerant gas as required to obtained desired cooling, carry out leak test etc., all as required at site complete commissioning, testing for the following capacity Note: Make of compressor:-Kirloskar/Emerson/ Copeland/Tecumseh/Carrier
Compressor suitable for 1.5 TR Capacity
Compressor suitable for 2.0 TR capacity
M&L for leak detection in refrigerant system of AC by using nitrogen pressure test, cutting brazing, making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas as required quantity to achieve desire cooling complete all as specified an directed-
Window type AC 1.5 TR capacity
Window type AC 2.0 TR Capacity
M&L for replacement of unserviceable electric blower motor suitable for 1/1.5 /2TR capacity window type AC double speed, single phase 230 volt 50 Hz, complete all as specified and directed. Make - Gulmarg/AUE or as per existing make/ type.
M&L for replacement of unserviceable running capacitor 30/36/40/45/55 mfd suitable for split/window type AC's 1 to 3 TR cap of existing make & model all as directed.
M&L for replacement of capacitor 4/6 mfd suitable for fan motor of (split/window /water cooler/Desert cooler fan motor) complete all as specified and directed.
M&L for replacement of unserviceable thermostat switch suitable for water coolers, Window type AC's /split AC's, refrigerators and Deep freezers any capacity, make & model complete all as specified and directed.
M&L for replacement of starting relay suitable for water coolers, Window type AC's /split AC's, refrigerators and Deep freezers any capacity, make & model complete all as specified and directed.
M&L for replacement of valves suitable for suction and discharge line of refrigerant and taking out the u/s valves of split AC's of capacity 1.5TR/ 2.0 TR and complete all as specified and directed.
M&L for replacement of Unsv 1/6 HP electric motor suitable for 1.0/1.5 TR/2.0 TR capacity window type AC double speed, single phase 230 volt, 50 Hz, including taking out the old US motor and complete all as specified and directed. Make - Gulmarg/AUE
M&L for replacement of unserviceable submersible water pump suitable for desert cooler 4000/5000/ Cfm complete all as specified and directed.
M&L for replacement of Khas pad set of best quality suitable for 4000/5000 CFM desert cooler any make and type complete all as specified and directed.
M&L for replacement of Unsv exhaust fan motor double speed single phase 230 volt 50 Hz 1460 RPM suitable for desert coolers 4000/5000 Cfm capacity complete all as specified and directed.
S&F push cock of 15 mm dia for water cooler and taking out the unserviceable push cock and all as directed.
M&L for replacement of float valve suitable for water cooler (40/60/120/150 Ltrs) capacity any make complete all as specified and directed.
Supply and fix hermetically sealed unit new Compressor by dismantling burnt out u/s Compressor suitable for water coolers of following capacities including provn of bushes, sleeves, washers nut and bolt for 4/3 Compressor foundation legs including relay terminal cover and clips on and including cutting, brazing, leak detection, charging suitable refrigerant and commissioning testing complete all as specified and directed for the following capacity:- Make : Kirloskar/Emerson climate Technologies (India) Ltd/Voltas/Blue star
Cooling capacity 40 Ltrs/Hr
Cooling capacity 60 Ltrs/Hr
Cooling capacity 120/150 Ltrs/Hr
Servicing of air curtain up to 6 feet, single phase, 240V by checking all electrical connection, blower, motor oiling greasing and replacement of u/s wire, lugs, bushes, rubber pads, bearing etc. all as directed by Engr-in-charge.
Supply and fix hermetically sealed unit new Compressor by dismantling burnt out u/s Compressor suitable for refrigerators including provn of bushes, sleeves, washers nut and bolt for 4/3 Compressor foundation legs including relay terminal cover and clips on and including cutting, brazing, leak detection, charging suitable refrigerant and commissioning testing complete all as specified and directed for the following capacity. Make : Kirloskar/Emerson climate Technologies (India) Ltd/Voltas/Blue star
165 - 200 Ltr capacity
285 - 300 Ltr capacity
M&L for leak detection in refrigerant system of Refrigerator (165 to 300 Ltrs cap) including cutting brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas as required quantity complete all as specified and directed-
Servicing of air shower for 2 persons by checking all electrical connection, replacing u/s wire, lugs, washers, sensors, push button, indicators, cleaning pre filters, blower motor servicing, oiling, etc by service engineer complete all as specified and directed
M&L for replacement of unsv Doormat magnetic switch of air shower complete all as specified and directed.
M&L for replacment of unsv hydraulic Door closer assembly of air shower complete all as specified and directed.
Repair/replacement of Printed circuit board of air shower for 2 persons taking down and re-fixing of the same complete all as specified and directed.
Replacment of unsv Pre filter of Air shower as per existing model having filtration efficiency 95% DN to 10Micron complete all specified and directed
Replacemnt of Unsv HEPA filters as per existing model of Air shower having filtration efficiency 99.97% complete all specified and directed
Replacment of unsv Emergency release switch as per existing model complete all as specified & directed
Repairing of blower motor of Air shower including replacment of defective parts & refixing to its original place complete all as reqd at site & directed by Engr in Charge
Replacment of unsv Blower belts of air shower as per existing size and model complete all as specified and directed.
Taking down of u/s and S&F sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V 20 amps complete all as specified and directed. Make: Standard/Havel's or equivalent make.
Painting of desert cooler, window type AC, water coolers, and stand with sun shade protection of split AC out door unit on duly prepared surface with approved synthetic enamelled paint of colour as per existing match all as directed.
Replacement of over load protection for Window/split type AC of any capacity complete all as specified and directed.
Taking down of old u/s and S&F of PVC pipe 15 mm dia flexible water pipe with distributor, 3 way suitable for desert cooler,complete all as specified and directed.
M&L for replacement of drain pipe of Split type AC up to 2 TR cap and length as required at site compete all as specified and directed`
M&L for servicing of humidifier Model No RM-2 &RM-3 including cleaning the pre filters, tank etc complete all a specified and directed by Engr in Charge
M&L for replacment of unsv Pre filter assembly complete as per existing model & make complete all as specified and directed.
M&L for replacment of unsv control module card with relay 220 V of humidified Model No RM2/3 of Rapid cool complete all as specified & directed by Engr in Charge
M&L for replacment of unsv digital humidistat with controller of humidified As per existing make & model complete all as specified & directed by Engr in Charge
M&L for replacment of unsv timer 220V of humidified Model No RM-2/3 complete all as specified and directed.
M&L for replacment of contactor MR-11W of humidifier model No RM-2/3 complete all as specified and directed.
M&L for replacment of 48V step down transformer as per existing make & Model of humidified Model No RM-2/3 complete all as specified & directed by Engr in Charge
M&L for replacment of unsv cut out switch of humidifier Model No RM-2/3 complete all as specified & directed
M&L for replacment of motorised valve with timer for auto flashing of humidifier Model No RM-2/3 complete all as specified and directed.
M&L for replacement of unsv condenser cooling coils of Split type AC up to 2 TR cap with new copper coil including taking out unsv condenser coil complete all as reqd at site and specified by Engr in Charge
Taking out existing split type air conditioners of any type and capacity removing from the site and keeping it in a safe custody for re-use or deposit in store complete all as specified and directed.
Fixing only split type air conditioners of any type and capacity including core cutting for passing copper tubing , drain pipe & cable through stone masonry wall with connected accessories such as bracket, copper tubing, cable from indoor to out door unit and rain water pipe etc as per site requirement all as specified and directed.
Sahara Engineers
M/s. ANAND ENTERPRISES
M/s Vijay Airconditioning Pvt Ltd
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .