SPECIAL REPAIR TO BLDG NO T-09 (CLOTHING STORE) OF 1 TB, 1 EME CENTRE UNDER GE(NORTH) SECUNDERABAD

Amount

Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc complete all as specified and as directed.

Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.

Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

Dismantling timber Scantling framed work 40 sqcm and over in section, in any position complete all as specified and as directed.complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc .complete all as specified and as directed.

S&F joist channel, angle or tee sections, fixed independently without connecting plates, etc., (cut to ordinary lenghts i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality complete all as specified and directed.

S&F Roof strusses (framed) and connecting plates, etc., ( cut to ordinary lenghts i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk forming holes, without any attachment etc.Roof strusses (framed) and connecting plates, etc., including necessary precautionary measures as in supports etc., Fe 410-W ( Gde-E-250) quality complete all as specified and directed.

S&F Mild steel bolts.purpose made.with hexagonal orforming holes, without anyattachment dia of neck exc 20mm not exc 25mm complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

M&L for RCC M-15 as Type B1 1:2:4 graded using 20mm Nominal mix granite/tap stone aggregate as in Lintel band including demolition etc complete all as specified and directed..

M&L for formwork to sides and soffits of floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed..

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups , spacers and binders etc., including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed

Material and labour for walling of squared rubble masonry regular coursed, Secunderabad and Bangalore types, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed

All as per item above but except stones complete all as specified and directed. Note- Serviceable stones obtained vide demolition item above shall be reused after removing mortar and cleaning with water complete all as specifed and directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 10 mm thick on fair faces of plasterd or concrete surfaces in cement mortar 1:4 finished even and fairt mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately complete all as specified and as directed

M&L for rendering in two coats (10 + 5 mm) 10mm thick in CM 1:6 for first coat and 5mm thick in CM1:4,for second coat on fair faces of brick work or concrete surfaces only second coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately

M&L for rendering in two coats (15 + 5 mm) 15mm thick in CM 1:6 for first coat and 5mm thick in CM1:4,for second coat on fair faces on stone surface only second coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately

Supply only water proofing compound of ISI marked complete all as specified and as directed.

M & L for preparing newly plasterd wall surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces and applying three coats of white wash etc all as specified and as directed.

M&L for preparation of newly plasterd surfaces and applying two coats of cement based paint over a coat of primer including preparation of surfaces etc all as specified and as directed.

M&L for complete removal of existing finishes and applying two coats of cement based paint including preparation of surfaces etc all as specified and as directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for(un-rainforcement) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L for designer rubber moulded chequerred cement concrete tiles with mixture of grey and white cemetn in equal porportions with pigments of size 300 x 300 xx20-22mm thick or 250 x 250 x20-22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction, complete all as specified and directed.

M&L for filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L 20-25 mm thick machine cut Polished kota stone as in floors laying down and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over bedding layer of 15mm thick in CM 1:6 complete all as specified and directed.

M&L 20-25 mm thick machine cut Polished kota stone as in skirting / riser of staircase laying down and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqms each complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, completed all as specified and directed. Make NCL Altech/ELIXIRMET/ ASHWANI & Sons

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed.

Material and labour for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats inculding copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as complete all as specified and as directed

Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion to match the existing surface in cement mortor 1:3 or cement concrete 1:2:4 Type1 as required depth of embeded portion exc half brick & N.exc one brick. complete all as specified and as directed

S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as directed and specified.

S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed

M&L for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint on steel surfaces over 10 cm width or girth, complete all as specified and directed.

M & L applying new wood surface two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface, complete all as specified and directed.

M & L preparation of old painted surfaces of wood and applying one coat of synthetic enamel paint on wood or wood based material over 10 cm width or girth, complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc all as specified and directed

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified

Supply and fix 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed

S&F for Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit concealed as per site requirment and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered suitable for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for:

One light point/Bell point controlled by one, one way switch 5 amps, SP, complete all as specified and directed.

One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator, complete all as specified and directed.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and directed. .

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and directed.

Description as per item No. 2 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 5 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor, complete all as specified and directed.

S & F switch piano single pole flush type 5 amps, 230 volts. complete all as specified and directed.

S & F switch socket combination flush type multipurpose 3 pin 5 amps 2 in 1 230 Volts all as specified.

S & F switch socket combination 2 in 1 multipurpose 5 pin 5/15 amps flush type complete all as specified.

S & F electronic ceiling fan regulator stepped type heavy duty suitable for BLDC motor complete all as specified.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round blocks all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

S & F LED tube light fitting 20 Watts , 230 volts, box type, epoxy powder coaded with reflector cover channel, with electronic drive, bipin holders, connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed. Make - Havells Cat part No LHEXBLP7PNIW020

S&F LED Light fitting 1x30 Watt complete with Bracket made out GI pipe med grade 25mm of L Shape 1.5 Mtr long incl clamps and nuts botls etc , all as specified and as directed. Make - LHEXAYP7PN6K030

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified.

S & F MCB SPN 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed.

S & F MCB SP 5 to 40 Amps 240 volts for fixing on MCB DB's all as specified.

Material and labour for sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I, 2009 complete all as specified and directed.

Supply and fix 1 GI steel tube medium grade 20mm outer dia for ceiling fans of 3 mtr long duly screwed threads with check nuts & pin for ceiling fan complete all as specified and as directed

S & F hanging hooks for fixing the fans.

Supply and fixing ceiling fans 1200mm, aluminium body, power consumption not more than 26W, BEE 5 star rated with BLDC motor, TDH<=105, service value greater than 8.45, air deliver minimum 220 CMM, 350 RPM (Tolerance as per IS : 374-2019) compatible to elecronic step type regulator unit for speed control, down rods complete all as specified and directed. Make - Bajaj/Havells/Crompton/Atomberg

S & F Vertical type TPN DB 4 way double door with incoming MCCB FP 415 volts AC 3 phase 50 Hz, 16KA breaking capacity with fized magnetic setting for current ranging of capacity 63 Amps confirming to IS-13947 (P-2) IEC:947 made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof having hinged and robust locking arrangement duly powder coated complete all as specified and directed. Make : Havells-Cat Part No VTPN_DHDLVDRWGOF O04 & MCCB Cat No - IHLGHF0100, Standard Cat No - DSDLVDRBAOFO01 & MCCB Cat No - ISLASF0100, C&S Cat No - CSDBMCCB100DD041P43S & MCCB Cat No - CSC3S4100.

Supply and Laying LT UG cable of size 4 core x 25 sqmm in trenches /floors/on wall /service connections XLPE insulated, PVC sheathed and armoured 1100 volts grade with aluminium conductor complete all as specified and directed. Make- Finolex /KEI/Havells

Supply & lay G I tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed of size 50 mm dia bore.

M/S RADHIKA ENTERPRISES

GNV Engg Services

ATUL ENTERPRISES

K CHANDRAPAL REDDY

BEEGEE DESIGN SYSTEMS