REPAIRS TO JOINERY TOILET PLUMBING WORK FLOOR TILES ETC IN MD OFFRS ACCN AT KOTWALI AND KABUL LINE CHURCH ROAD, MALL ROAD, MANDIR MARG IN THE AREA OF AGE BR 1 UNDER GE EAST DELHI CANTT 10

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .

M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .

M&L for Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:6 including incl dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), and removing rubbish off the premises complete all as specified and as directed

M&L for Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles not exceeding 0.11Sqm Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:6 including incl dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), and removing rubbish off the premises complete all as specified and as directed

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 300x 600x 7 mmthick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.

M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.

M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each as in vertical surfaces of dados/skirtings/sides of pillars etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing layer in cement mortar 1:4 including dismantling of old tiles with backing, and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.

S&F Drapery rod 25mm dia aluminum, powder coated teak wood texture finish 1mm thick, with end bulbs rings of required size including fixing bracket, complete all as specified and as directed.

Removing existing paint by scrapping with TruCare Wall Sander: L-01/H-01(having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified and directed

Providing and applying waterproof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, of Asian paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth on wall/ceiling surface complete all as specified and directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints or equivalent as per list of makes Trucare Putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5kg putty per minute).. Step 2 : Allow 6-8 hrs time to dry the putty surface.

Sanding of the putty surface with Asian Paints or equivalent as per list of makes Tru Care Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified.

Providing and applying one coat of acrylic waterbased interior/exterior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall/ceiling surface complete all as specified.

Providing and applying two coats of smooth acrylic emulsion with rich matt finish(interior grade) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall/ceiling surface complete all as specified..

Preparation external wall and ceiling surface by complete removal of existing treatment of walls for upto 4 storey buildings by mechanised sander of Asian Paints or equivalent as per list of makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying two coats of weather proofing exterior acrylic emulsion paint premium quality of berger or equivalent make as per approved make list in particular specification on wall surfaces complete all as specified and directed by Engr-in-charge. Note : The work will also include execution of work in High rise bldgs and cost of necessary T&P, scaffoling is included in Quoted rates).

Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed.

Applying two coats of oil bound distemper on wall surfaces complete all as specified and directed. (Note : Finishing coat to applied with roller).

Applying one coats of Oil Bound distemper on ceiling surface complete all as specified and directed. (Note : Finishing coat to applied with roller).

Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying twocoat of synthetic enamel paint, over a coat of pink primer complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of newsteel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation old decorated external wall surface by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and repair to potholes by putty and making surface even and smooth and applying two coats of Cement base paint complete all as specified and directed by Engr-in-charge. Note : 1. The work will be also executed upto four storied bldgs and necessary T&P, scaffoling is included in Quoted rates. 2.Cleaning/washing and dusting of floor/wall/door/window/fittings and fixture to be carried out by contractor before handover the site

Cleaning of tiling work in floors and walls using suitable chemical or solvent as per manufacturer''s instructions duly taking care not to damage glaze of tiling work, including necessary filling of joints/grouting with white cement and removing any loose debris or dirt etc. complete all as specified and as directed by Engr-in-Charge.

S&F in repair Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg ,CP flange etc complete all as specified and as directed.

S&F in repair Sink mixer with regular swinging spout (wall mounted model ) with connecting legs & wall flanges) for 15 mm bore complete all as specified and as directed.

S&F in repair fancy type angle Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.

Taking up or down steel tubing and connections 15mm bore complete.

Taking up or down steel tubing and connections 20mm bore complete.

M&L Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete.

All as per Srl item No but 19mm bore complete.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed.

S&F in repair Plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete.

S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete

S&F in repair fancy type Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete.

S&F in repair CP Toilet roll holder with flange fixed in position complete all as specified .

S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete.

S&F in repair looking mirror of size 600*450mm mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer including first class hardwood beading 20 mm wide on sides including polishing complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mm mm diameter of outlet, all as specified.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 but n.exc 1000 ltrs and from mouth of circulating pipes with suitable chemical or solvent as per manufacturer's instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete.

S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.

S&F in repair Corner Glass Shelf of size 225mm x 225mm including screws and bracket fixed in position, , complete all as specified and as directed

S&F stainless steel peg set (set of 06 hook) fixed with screw and PVC gutty on wall in position as per sample kept in GE office complete all as specified .

Dismantling water tanks exc 500 but n exc 1000 Ltrs capacity and removing to store.

S&F tripple layer Rotational moulded HDPE Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position completeall as specified in SSR Part I etc complete.

S&F tripple layer Rotational moulded HDPE Water Storage Tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position completeall as specified in SSR Part I etc complete.

S&F in Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete.

S&F in repair Gun metal gate valve with iron wheel head screed both ends for iron pipe and fixed 20mmm bore complete

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Taking down shutters of any description n .exc 2 Sqm each complete.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S&F Box type steel window & ventilators with double shutter (inner shutter without glazing bars and outer shutter with glazing bar) consisting with pintel hinges,steel Handle,tower bolt and steel peg stey/hook complete devotailed or welded a coat of red oxide after preparation of surface fixing all as shown as per HQ CWE Delhi Cantt-10 TD-A sheet 01/03 to 03/03 all as specified as directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .

S&F 105mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.

S&F 125mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.

S & F IInd class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified.

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified.

Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge.

Factory made 2nd class hard wood,35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Factory Made flush shutter 30 mm thick solid core construction with block board core and ply wood faced pannels commercials type on both sideswith decorative rubber beading complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020).

S&F, factory made PVC glazed or gauzed shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling. The wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlycoplete as per specification and shown on drawing SSR Part-II (2004).

Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mmx2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mmx44mmx2mm thick lock rail and bottom rail of xize 115mm x 44mm x2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick froasted designer glass(ass approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt ,.200 mm long fancy ryper alm handle -02 Nos on each leaf ,4 leaver brass 100mm long mortick lock & doubble action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed.

S&F aluminum anodised powder coated grill section 5 to 6 mm of square/dimond shape having picth size of mesh 75x100 mm etc complete all as directed.

S&F Ist class hardwood as small fittings n exc 200cu cm each such as brackets of any type , latch and hinge blocks, shaped door and window stops and the like incl, all necessary labours and butt hinge of size 40mm complete all as specified as directed.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete.

S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

150 mm, Mild steel ordinary rat tail rod pattern springs of brass including roller and roller plate, fixed in repairs complete.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3.50mm thick all as specified

All as per item No above but frosted glass.

Dismantling boarding, any description, fixed in any position with screw complete

M&L for prelaminated particle board ,interior grade prelaminated one side with decorated choice lamination and other side balancing white lamination fixed with screws to timber frame work 18/19mm thick

S&F, Ist class hard wood external teak wood leaping, 6mm thick to 18-19mm thick block board or veneered particle board, fixed with nails complete.

Material and labour for 2nd class hard wood(Sal) plain fillets square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 6 and not exc 13 sq cm , fixed in repair complete all as specified and directed by Engr-in charge

Supply and fix continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm.

S&F magnetic catches with steel body ‘H’ type, fixed to kitchen/cupboard shutter complete.

S&F, 75mm Long polished extruded brass Handle fixed with screw.

S&F,50 mm knobe be bright polished hard wood fixed with screw.

Hasp and staple 125mm size, safety type, aluminum anodised including bolt to hinge plate, fixed in repairs with screws complete.

Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete

Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . ( d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

M&L for cutting holes into of through brick walls exc half brick but n exc one brick built in cement mortar for inserting hold fast and making good dismental porton in cement mortar 1:3 or cement concrete 1:2:4 type B1 all as specified and directed

M&L for Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existing CGI sheet complete all as specified.

Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No 192055 or equivalent as per Appx 'A' of PS.

S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair 15mm bore 2 way bib taps cast copper alloy with cruth or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore including CP wall flange all as specified and directed

S&F in repair Bib taps standard of PTMT any colour screwed, for iron pipe 15mm bore and fixed ( Minimum weight 15 mm- 90 gms)

S&F in repair fancy type chromium plated brass bib cock nozzle with flange with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete Make : Prayag Cat Part No 7305 or equivalent as per appx 'A' of PS.

S&F in repairs CP Health faucet including flexible pipe of 1 m length fixing to 15m dia pipe with brass check nut complete all as specifed and directed.

S&F Easy dry pull it complet size 6 feet with 4 pieces of pipes for drying wet cloths complete all as specified. (make- Easy dry OR equivalent as per Appx 'A' of PS

Dimantling of soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radius 110 mm bore

S&F PVC (SWR) Tee any radius 110 mm bore

Taking Down Cement plaster/duster bed PCC of column, chajja , paraphet of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 (average thickness of PCC 25 mm) as required brushing neat cement slurry wwith 3.0 kg of cement per sq metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surface

M&L for 10-12 mm thick polymer modified readymix cement based plaster make ultratech(brand name readiplast) or equivalent in ratio 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .

Akhil Enterprises

Vipul Construction

MAA SANTOSHI ENTERPRISES

M/s Ravinder Kumar

V r traders