rate contract of orthopedic trauma implants

Proximal humerus locking compression plate (PHILOS) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel.

Narrow 4.5 mm Locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel.

Distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel.

Extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length – all sizes), stainless steel.

Interlocking nails for Humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm)

Proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel.

Olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel.

Locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel.

1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel.

1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel.

Distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel.

Distal radius T LOCKING PLATE 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel.

Distal radius T NON LOCKING PLATE set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel.

Clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, SS.

Headless compression screws 2.7mm, self-tapping, cannulated, Length 10-40mm,Titanium

Headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, Titanium

Headless compression screw 4.5mm self-tapping, cannulated, length 10 – 60 mm, Titanium.

1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *

2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *

2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *

Radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel.

Ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel.

3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel

3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel.

2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel.

Orthofix external fixator, size- L/M/S/ES, SS, dynamic screw measuring 9mm

Ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm Ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/Schanz screw holding), 120 full nuts, 10 washer, Two male and two female posts(one to four holes), four Schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. Instrumentation to be provided along with the set must include: four open spanners 10/11, two T- box wrench 10/11, two hex wrench, two closed spanners 10/11, two dynamometric wire tensioners, one manual wire tensioner.

Ilizarov ring fixator set for femur: one set consisting of 6 half rings (160 mm to 220 mm), plus one 5/8 ring(160mm to 220mm), two Italian arches (90/120 deg, small/medium/large); four oblique support (small/medium/large), 6 ring connecting bolts, 12 threaded rods(100 mm to 400mm), six 1.8mm Ilizarov wires(trocar/bayonet tip), four olive wires, 30 slotted bolts (centric/eccentric/Schanz screw holding), 120 full nuts, 10 washer, Two male and two female posts(one to four holes), eight Schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. Instrumentation to be provided along with the set must include: four open spanners 10/11, two T- box wrench 10/11, two hex wrench, two closed spanners 10/11, two dynamometric wire tensioners, one manual wire tensioner.

Monoaxial external fixation device with provision of bone transport Adult. One set consisting of one mono rail(200mm to 400mm), three clamps(end clamp/ centre clamp/ swivel clamp/ T clamp), two compression distraction unit(all size), allen key, Ten tapered schanz screw 6.0/6.5mm, two allen key.

Limb reconstruction system (Rail road) for Pediatrics:-bone lengthening/ bone transport. To be quoted as a complete set, Rail rod,L 150-250 mm, Central Clamp, Swivel Clamp, End Clamp, Schanz pin 4 mm, tappered 3.5 mm to 3 mm. Schanz pin 6 mm ,tappered 4.5 mm to 3.5 mm with Hydroxy Apetite (HA) Coating for threads.

Pelvis reconstruction plate set, suprapectineal plate with quadrilateral plate buttress attachment, all sizes with ten cortical/cancellous screws.

Pelvis reconstruction plate set, prebent, all sizes, with ten cortical/cancellous screws.

4.5 mm broad low contact locking compression plate, 5-14 holes with six cortical and six locking 4.5 mm screws (Stainless steel).

4.0 mm cannulated cancellous screws, partially threaded with guide wire and washer (length 30-60mm), various thread length, (Stainless steel).

6.5mm partially threaded cancellous screws with washer (length 35-110mm), thread length 16mm (Stainless steel).

7.0 mm cannulated cancellous screws, partially threaded with guide wire and washer (length 65-110mm), 12mm, 16mm, 32mm thread length, (Stainless steel).

6.5 mm cannulated screws, fully threaded 20mm- 130mm (in 5mm increments), 140-180 mm (in 10mm increment) with washer, (Stainless steel).

6.5 mm non cannulated cancellous screws, fully threaded 20mm- 130mm in 5mm increments, 140-180 mm (in 10mm increment) with washer, (Stainless steel).

Femoral Neck System, consisting of 5mm femoral neck plate (1 or 2 holed), with corresponding one 10 mm Bolt (size 75 mm to 130 mm), one 6.4 mm Anti-rotation screw (75mm-130 mm) with 1 or 2 5mm self-tapping locking screw (20 mm- 44 mm), Titanium. Used for femoral neck fracture fixation.

DHS set consist of one lag screw (65 – 110mm), one compression screw, one short/ long barrel plate (4-12 holes) and 6 cortical screws misc. sizes.

Variable angle DHS set consist of one lag screw (65 – 110mm), one compression screw, one short/ long barrel plate (4-12 holes) and 6 cortical screws misc. sizes.

DCS set consist of one lag screw (65 – 110mm), one compression screw, one short/ long barrel plate (4-12 holes) and 8 cortical screws misc. sizes, with one 6.5mm cancellous screw of all sizes.

Proximal femoral nails R/L, Short/ standard, size- 18 to 44cm length, 9 to 12 mm in diameter with 2 proximal and 2 distal locking bolts (stainless steel).

Proximal Femoral Nail (PFN-A)- R/L, short/ standard, size 18 to 42cm length, 9-12 mm in diameter with PFNA blade of various sizes, 4.9mm distal bolts of various sizes (Stainless steel).

Reconstruction nail for Femur with provision of trochanteric entry point, diameter 9-12mm and 36-44cm length with four bolts of assorted size

Interlocking nails for femur 32 to 44cm length, 8 to 12 mm in diameter with 2 proximal and 2 distal locking bolts (stainless steel).

Interlocking nail for femur, Right/ Left, diameter 9-12mm and length 34-44mm with 4 interlocking bolt 4.9mm of assorted sizes, 3 cannulated 6.5mm bolt of assorted sizes (stainless steel).

Distal femoral nail with 2 proximal and 3 distal locking screw (nail diameter 9-12mm), option of 2cm increment in length from 26cm-38cm with option of interlocking in multi-planes (stainless steel)

Proximal femur anatomical locking plate 5-13 holes with 5 proximal holes with plate compatible 8 locking screws and 8 cortical screws, right and left (Stainless steel)

DFLP (distal femoral lateral anatomical locking plate), right and left, 5-13 holes on the shaft with nine 4.5mm locking screws and six 4.5mm cortical screws (Stainless steel)

Distal femoral medial anatomical locking plate), right and left, 5-9 holes on the shaft with nine 4.5mm locking screws and six 4.5mm cortical screws (Stainless steel)

Proximal tibial lateral anatomical locking plate, 5-13 holes, right and left with nine 3.5mm locking screws and four 3.5mm cortical screws, should have at least 4 screws in periarticular region (Stainless steel)

Proximal tibial anterolateral anatomical locking plate 4.5 mm, right and left with 5-13 holes with nine 4.5mm locking screws and four 4.5mm cortical screws, should have at least 4 screws in periarticular region (Stainless steel)

Proximal tibial posteromedial anatomical locking plate 3.5 mm, 5-11 holes with nine 3.5mm locking screws and four 3.5mm cortical screws, should have at least 3 screws in periarticular region (Stainless steel)

Proximal tibial medial anatomical locking plate 5-11 holes with nine 3.5mm locking screws and four 3.5mm cortical screws, should have at least 3 screws in periarticular region (Stainless steel)

Distal tibial medial anatomical locking plate 5-11 holes with nine 3.5mm locking screws and six 3.5mm cortical screws (Stainless steel)

Distal tibial anterolateral anatomical locking plate 5-11 holes with nine 3.5mm locking screws and four 3.5mm cortical screws with at least 4 screws in periarticular region (Stainless steel)

Tibial nail (expert type) with multi-planer locking in proximal and distal ends, with 6 locking bolts, in miscellaneous sizes (stainless steel)

3.5mm LCP Calcaneal Plate, Left/Right, with implant specific instrumentation (Stainless steel)

Cortical Drill bit (non cannulated) with diameter 2.5mm and length 150mm with quick coupling end

Cortical Drill bit (non cannulated) with diameter 2.0mm and length 125 mm with quick coupling end

Locking drill bit with diameter 2.8mm with quick coupling end

Drill bit with diameter 3.5mm and length 110 mm with quick coupling end

Drill bit with diameter 4.3mm, length 221mm

Cannulated drill bit 4mm for 6.5mm and 7.0 mm CCS

Guide wires for 4mm, 6.5mm, 7.0mm CCS

Drill bit 4.5mm, length 195/170 mm 2 flute, for quick coupling

Drill bit 4.5 mm, length 180/165 mm, 2 flute, for Jacobs chuck

Drill bit 3.2 mm, calibrated , length 230/205mm, 3 flute, for quick coupling

Drill bit 3.2 mm, length 180/165mm, 2 flute, for Jacobs chuck

Forearm fixator clamps for 2.5/ 3.5 mm pins with solid connecting rods – all sizes

Denham’s pin 4.5mm/5.0 mm

Steinman pin 3.0/3.5/4.5/5mm

Tubular rods 10”, 12”, 14” SS, compatible with AO type universal clamp

Schanz screws 2.5mm

Schanz screws 3.0mm

Schanz screws 3.5mm (thread size 12/18 mm)

Schanz screws 4.5mm (thread size 12/18 mm)

Schanz screws 5.0 (cortical and cancellous), thread size 12/18/32mm

AO type Universal external fixator clamp

200 Tube to tube clamps (AO type)- compatible with AO type external fixator tubular rod10s

Titanium elastic nail system 2.0/ 2.5/ 3.0/ 3.5/ 4.0 mm

K nail 8-14mm, length 32-44cm

Figure 8 epiphysiodesis plate with corresponding screws, SS

Coventary staples Titanium/ U staples, Misc sizes

Kirschner wire,non-threaded, both end trocar tip, diameter; 0.8mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 1.0 mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 1.5 mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 2.0 mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 2.5 mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 3.0 mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 3.5 mm, length – 6 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 2.0 mm, length – 12 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 2.5 mm, length – 12 inches.

Kirschner wire,non-threaded, both end trocar tip, diameter; 3.0 mm, length – 12 inches.

, both end trocar tip, diameter; 1.0mm, length – 6 inches.

Kirschner wire, completely threaded, both end trocar tip, diameter; 1.5mm, length – 6 inches.

Kirschner wire, completely threaded, both end trocar tip, diameter; 2.0 mm, length – 6 inches.

Kirschner wire, completely threaded, both end trocar tip, diameter; 2.5mm, length – 6 inches.

Kirschner wire, completely threaded, both end trocar tip, diameter; 3.0 mm, length – 6 inches.

Spool of stainless steel wires 16 G

Spool of stainless steel wires 18 G

Spool of stainless steel wires 20 G

Spool of stainless steel wires 22 G

Gigli saw with handle

Bohler stirrup, size - small/medium/large

Low viscosity PMMA bone cement 40g

Cramer wire splint (aluminium), size –small

Cramer wire splint (aluminium), size –medium

Cramer wire splint (aluminium), size –large

Non adhesive skin traction kit- various sizes

Thomas splint - small/ medium/large

Bohler braun splint- small/medium/large

Esmarch bandage 3”/4”/6” length 2.5m

Crape bandage 4”/6”

Absorbable calcium sulfate antibiotic carrier

Crutchfield tong with shoulder drill bit, size –small

Crutchfield tong with shoulder drill bit, size -medium

Crutchfield tong with shoulder drill bit, size -large

Iodine impregnated incision drape- adhesive type

Hip U drape (disposable) L-200cm, Width-160cm, Head sheet 1x1.5m, Adhesive strip 4cm x 1.5m

Knee O drape with pouch (disposable) 240x340cm, Elastic aperture 5cm dia

Spine drape 160x250cm with incise area 15x35cm

Bone wax sterile (2.5g per strip)

Absorbable gelatine sponge 80x50x10mm (Gel foam)

Fibrin sealant 2/4/10ml

Hemostatic matrix ( 5/10 ml)

Absorbable hemostat ( 2x3in, 4x8in

Jamshidi style bone biopsy needle, size 10cm x 11G

Jamshidi style bone biopsy needle, size 10cm x 13G

Buck’s pulley

Head halter traction kit- size- paediatric/ adult

Philadelphia collar, size- small

Philadelphia collar, size- medium

Philadelphia collar, size- large

Philadelphia collar, size- pediatric

Pelvic binder, size- small/ medium/ large

Long static knee brace, size- L

Long static knee brace, size- XL

Long dynamic knee brace, size- L

Long dynamic knee brace, size- XL

Polyester non-absorbable sutures (Ethibond) No. 2 & No. 5 V-39 needle x 75cm length

Pulse Lavage - Pulse Lavage wound debridement system (Disposable battery operated with concurrent suction and fan spray tip)

Sterile disposable covers for image intensifier (2 pieces in one pack)

Disposable O drape for Knee surgery (size 130 cm x 200 cm)

Disposable U drape for hip surgery (size 130 cm x 200 cm)

Betadine impregnated sticking drape for orthopaedic implant surgery (Medium/Large size)

Orthopaedic gloves with following specifications- Atleast 0.330mm thick for increased protection, Textured surface for better grip, Ease of donning, Dull colour to reduce glare, Great flexibility and elasticity, Latex, Powder free polymer coated inner surface

Disposable impervious surgical gowns with back flap completely covering the back of the surgeon (Medium/Large /Extra large size)

Blade for Humby's Knife, Sterile 158mm stainless steel

X Ray Protective Lead Aprons: Protective apparel that is ergonomically designed and lightweight, making it comfortable to wear for long durations. Protection for the upper body and the sensitive thyroid gland at a lead equivalence of 0.5 mm Pb. Basic back protection required for CT Scans and cath labs at a lead equivalence of 0.25 mm Pb. Apparel should comply with the strict norms under EU directives 89 / 686 / EEC and 93 / 42 / EEC.

Radiation protective goggles (CE / FDA Approved

Skin marking pen, sterile, disposable, thin tip

Disposable Skin stapler

Esmarch bandage 6”

Esmarch bandage 4”

Bone wax

Gigli saw

Disposable gamma irradiated gown set – each containing 5 gowns, 4 large drapes and stockinette each

Disposable kit for vacuum bone cement ( compatible with vaccum mixing system for bone cement, console for vacuum mixing of bone cement to be provided on case to case basis)*

Disposable gamma irradiated , impervious kit of drapes for hip and knee surgery(replacement) containing (sterile stockinette, O drapes/ U drape, screen cover, polydrape sheet, drape sheet 1 X 1metre)

Osteoconductive and resorbable injectable prefilled hydroxyapatite bone graft paste (5 ml) with injector kit*

Osteoconductive cortical synthetic resorbable bone granules (5 cc) with minimum compression strength of 200mpa*

Antibiotic impregnated (Gentamicin) collagen implants (all sizes)*

Nylon 3-0

Nylon 4-0

Non-absorbable, sterile surgical suture composed of polypropylene, pigment to enhance visibility. 6-0. Round body needle

Non-absorbable, sterile surgical suture composed of polypropylene, pigment to enhance visibility.7-0. Round body needle

Non-absorbable, sterile surgical suture composed of polypropylene, pigment to enhance visibility. 8-0. Round body needle

Non-absorbable, braided, coated, sterile, surgical suture composed of Poly (ethylene terephthalate). No.2

Non-absorbable, braided, coated, sterile, surgical suture composed of Poly (ethylene terephthalate). No.5

Fibrin Glue/sealant 2 ml

Silicon tendon rod (Hunter) 3mm

Silicon tendon rod (Hunter) 4mm

Sterile kit for Bone Marrow Aspirate Cencentrate (BMAC) generation*

Sterile kit for Platlet Rich Plasma (PRP) generation*

Sterile Demineralized Bone Matrix 1 cc pack*

Plaster of paris powder

Plaster of paris bandages 4”

Plaster of paris bandages 6”

Thomas splint (Pediatric size)

Thomas splint (Adult size)

Bohler Brawn Splint

Crutchfield tongs for skull traction (all sizes) with guarded drill bit