Day to day repair and maintenance works of Residential qtrs. (Both Civil and EnM) of CWS(X), Talcher for a period of 45 days (Stop gap).

Part A Civil Portion

Upkeeping of concrete pavement/ Black topped roads excluding coal transport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket,brooms with handle stick complete as per the direction of Engineer-In-Charge. (Agency has to clean the relavent area every altranate day)

Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as per the direction of Engineer-In-Charge.For a lead of 4.00km

Disposal of dead animals like street dog,pigs,cat etc. as an when required including digging of pits and buring the same as per instrution of engineer in charge.

Disposal of dead animals like cow,ox,buffalow etc. as an when required including digginhg of pits and buring the same as per instrution of engineer in charge.

Removal of chokage / blockage of inspection chambers by removing silt,sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge

Removal of chokage / blockage of manholes by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge.

Day to day maintenance of water supply network and plumbing works etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area .5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work

Providing of white cement

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm

Polythelyne water storage tank with cover and suitable locking arrangement ISI-12701 marked as per instruction of EIC

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing Gun metal gate valve with CI wheels 40 mm of approved quality.

Providing Chlorinated Polyvinyl-Chloride(CPVC)Pipes 20 mm Outer Dia of approved quality

Providing Chlorinated Polyvinyl-Chloride(CPVC)Pipes 25 mm Outer Dia of approved quality

Providing C.P. bib cock 15mm of approved quality

Providing C.P. stop cock 15mm of approved quality

Providing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of EIC.

Providing Semi Rigid PVC waste pipe for sink and wash basin 32mm dia with length not less than700mm i/c PVC waste fittings of approved quality.

Providing Unplasticised PVC connection pipe with brass union 30cm long(15mm ) of approved quality.

Providing pvc washer suitable for brass bib cock and stopcock of approved make as perdirection of EIC.

Providing M.seal adhesive or equivalent (in packet of 100 gm) as per instruction of EIC.

Attending electrical maintenance, repairing & breakdown work of residential Quarters & Non- residential Establishments including street lights, underground cables as required and any other work as per instruction of Engineer-in-charge Providing Electrician (Skilled) manpower ('A' Shift:- Electrician - 1 'B' Shift: - Electrician - 1 ) under the administrative control of CWS(X),Talcher.

Attending electrical maintenance, repairing & breakdown work of residential Quarters & Non- residential Establishments including street lights, underground cables as required and any other work as per instruction of Engineer-in-charge Providing Electrical Helper (Semi Skilled) manpower ('A' Shift:- Elect Helper - 1 'B' Shift: - Elect Helper - 1) under the administrative control of CWS(X),Talcher.

Providing of S.P. 5/6 amps, one way switch, piano type ISI marked

providing of S.P. 15/16 amps, one way switch, piano type ISI marked

Providing of 3 pin 5/6 amps socket outlet, piano type ISI marked

Providing of 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Providing of plug top,5amps,3pin,230Volts of reputed make ISI or Equivalent Mark

Providing of plug top,16amps,3pin,230Volts of reputed make ISI or Equivalent Mark

Providing of Angle Holder, 6amps, 230volts of reputed make ISI or Equivalent Mark

Providing of Stepped type Modular Fan regulator (2 module) ISI or Equivalent Mark

Providing of Ceiling rose, 3 pin, 5 amps ISI marked

Providing of fan capacitor, 2.5mfd, 230volt of reputed make

Providing of 1.5 sq mm PVC insulated multi strand copper cable ,ISI marked, single core of reputed make

Providing of 2.5 sq mm PVC insulated multi strand copper cable ,ISI marked, single core of reputed make

Providing of 4.0 sq mm PVC insulated multi strand copper cable ,ISI marked, single core of reputed make

Providing of 6.0 sq mm PVC insulated multi strand copper cable ,ISI marked, single core of reputed make

Providing of 10 sq mm PVC insulated multi strand copper cable ,ISI marked, single core of reputed make

Providing of 2 core X 6 sqmm CTS aluminium wire, twin core of ISI or Equivalent Mark

Providing of MCB 32Amps, 10KA, C-curve,230volt single pole ISI or Equivalent Mark

Providing of MCB 20Amps, 10KA, C-curve,230volt single pole ISI or Equivalent Mark

Providing of MCB 16Amps, 10KA, C-curve,230volt single pole ISI or Equivalent Mark

Providing of MCB-DP 32Amps, 10KA, C-curve,230volt Double pole ISI or Equivalent Mark

Providing of MCB-DP 63Amps, 10KA, C-curve,230volt Double pole ISI or Equivalent Mark

Providing of LED Tube light fitting of 20 watt,230volt BEE 5 Star rating.

Providing of LED bulb pin type of 10 watt, 230volt BEE 5 Star rating.

Providing of PVC board of size 4"X4" With cutting

Providing of PVC board of size 7"X4" With cutting

Providing of PVC board of size 8"X6" With cutting

Providing of PVC board of size 8"X10" With cutting

Providing of PVC board of size 10"X12" With cutting

Providing of PVC insulated adhesive tape 3/4" ,10mtrs long ISI marked,

Providing of Aluminium lugs for 50 sq. mm cable BIS confirmed

Providing of Aluminium lugs for 70 sq. mm cable BIS confirmed

Providing of Aluminium lugs for 95 sq. mm cable BIS confirmed

Providing of Aluminium lugs for 120 sq. mm cable BIS confirmed

Providing of Aluminium lugs for 150 sq. mm cable

Providing of copper lug socket heavy duty 50 sq mm .BIS confirmed

Providing of copper lug socket heavy duty 70 sq mm .BIS confirmed

Providing of copper lug socket heavy duty 95 sq mm .BIS confirmed

Providing of copper lug socket heavy duty 120 sq mm .BIS confirmed

Providing of copper lug socket heavy duty 240 sq mm .BIS confirmed

Supplying of manpower for trimming of trees laying under HT and LT overhead lines of CWS(X) Feeder catering power from 33/11KV Balanda sub station to 2X1MVA main substation of CWS(X), Talcher.

Dismantling, Repairing, Rewinding of ceiling fan/exhaust fan/wall fan complete job as required.

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil & disposal of surplus excavated soil as directed within a lead of 50 metres.14.2

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

Please Enable Macros to View BoQ information