86192 PROVN OF STORAGE ACCN FOR ARMOURIES AND EXPLOSIVE STORE AND GUARD HOUSE AND ANCILLARIES AT AIPT UNDER GE(CENTRAL) PUNE

Amount

B/R PORTION NOTE : All items required for providing building by new construction including internal services & allied works required for site clearance, road/ Path / Culvert, Sewage Disposal etc. shall be measured and paid under B/R portion of this BOQ. No claim of contractor on this account shall be entertained.

Surface dressing n exc 15 cm in soft/loose soil complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying LT UG Cable, GI Pipe etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying LT UG Cable, GI Pipe etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and as directed.

Excavating in trenches not exc 1.5 m wide but exc. 1.5m to 3.00m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and getting out in soft /disintegrated rock complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removal excavated soil not exc 50m and depositing outside MOD land at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Removing excavated soil material exc. 1.50 km but n exc. 5 km and depositing outside MOD Land complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and as directed.

All as per Ser. Item No. 11.00 above but 8mm dia complete all as specified and as directed.

All as per Ser. Item No. 11.00 above but 8 to 10mm dia as in stirrups, spacers and binders etc. complete all as specified and as directed.

M&L for use and waste for formwork to rough finished flat surfaces of footing and plinth beams complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and as directed.

M&L for formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) for columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and as directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded stone aggregate) for roof beams and lintels complete all as specified and as directed.

M&L for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing and similar works complete all as specified and as directed.

M&L formwork to edges of concrete flat treads and sided of RCC floor and roof exceeding 10 Cm wide and not exceeding 20cm complete all as specified and as directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded stone aggregate) for slabs supported on walls, landings and like etc complete all as specified and as directed.

M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges complete all as specified and as directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded stone aggregate) for chajjas complete all as specified and as directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and as directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L for AAC block masonery (600mm x 200mm x 200mm) exc 100 mm width built in jointing Adhesive manufactured by same manufacturer complete all as specified and directed.

M & L for AAC block masonery half brick wall built in jointing adhesive manufactured by same manufacturer complete all as specified and as directed. (NOTE for Ser. Item No. 28.00 & 29.00 above : Sample / make of the AAC Blocks shall be got approved from GE before placing bulk order by the Contractor)

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick plaster on concrete surfaces in CM (1:3) including finish even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make with and over 2mm thick wall care putty complete all as specified and directed.

M&L for three coats of white wash on ceiling surface including preparation of newly plaster surface complete all as specified and as directed.

M&L for hard core of broken stone of gauge exc. 63 mm deposited spread and leveled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M & L for PCC 100mm thick (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base for flooring over 100mm thick hard core (Hard core will be measured and paid separetely) complete all as specified and as directed.

M&L for 75 mm of thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection & finishing the surface of concrete topping even & fair without using extra cement complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L for colour Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L for Glazed ceramic tiles coloured 450mm X 300mm X 7mm thick, in vertical surfaces etc. set and jointed in neat slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S & F pressed steel frames of size 125mm X 60mm for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete including MS hold fast, PCC bed block (1:2:4) type B1 for hold fast and cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone agg) for filling in MS frame complete all as specified and as directed.

S & F pressed steel frames of size 105mm X 60mm for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete including MS hold fast, PCC bed block (1:2:4) type B1 for hold fast and cement concrete 1:3:6 type C0 (using 12.5mm graded crushed stone agg) for filling in MS frame complete all as specified and as directed.

S & F factory made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (With sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made IInd class HW rail & style, 40 mm thick Plain, framed, panelled shutters (two panels), with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (Part-I) kiln seasoned and chemically pressured treated supplied and fitted to chowkats complete all as specified and as directed.

S&F three track sliding aluminium powder coated window with two or more shutters with 4 mm thick tinted glass one shutters of stainless steel wire cloth 0.36mm nominal dia and 1.18mm width aperture for mosquito proofing with good quality bearing handles, locks, etc using rubber beading and glazing clip etc using following powder coated sections conforming to catalogue of 'JINDAL' or equivalent in specified makes complete all as directed by Engr-in-charge. (a) Bottom frame - 20620 (b) Shutter top & bottom - 20844 (c ) Shutter side - 20606 (d) Top frame and slide - 20621 (e) Shutter interlock - 20845 (f) Glazing clip - 19352 (NOTE : Work under this item shall be executed as per drg No. CEPZ/2013/TD/01 (sheet No.1/2 dt 14 Jan 2013 available in Office of GE (C) Pune. The contractor shall refer the same prior quoting tender. Quoted rate shall deemed to be inclusive of this provision irrespective of the fact whether contractor referred the same or not. Contractor's claim of what-so-ever nature on this account shall not be entertained.)

S&F aluminium powder coated ventilators/louvers with 5mm thick x10cm wide frosted glass strips and following aluminium powder coated section conforming to catalogue of Jindal or equivalent in specified make and rubber beading etc complete all as specified and directed. (a) SP- 20048 (b) Glazing clips-19352

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 176 of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed.

S&F harrison rails (Curtain rod/drapery rod), 20mm dia, stainless steel with and including fency type stainless steel bracket / wall to wall 02 Nos of each opening and stainless steel side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer area exc. 10 cm width or girth complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handles fabricated type complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed.

S&F cold rolled mild steel butt hinges 100mm, medium weight complete all as specified and as directed.

S&F MS 300mm ordinary rat rail rod pattern springs incl roller & roller plate complete all as specified and as directed.

S&F 15 mm bore angle valve chromium plated fancy type, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union 15mm bore complete all as specified and as directed.

S&F PTMT grating 125 dia with waste hole (Min Weight 40 Gms) complete all as specified and as directed.

S&F Chromium plated Bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or brass ferrule 15 mm dia complete all as specified and as directed.

S&F PVC connection 15mm bore 450mm long with PTMT nuts complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socked in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm PVC (SWR) bends with oval access door any radius complete all as specified and as directed.

S&F 75mm PVC (SWR) bends with oval access door any radius complete all as specified and as directed.

S&F vitreous china WHB with pedestal White flat back size 550 x 400mm in repair with PVC waste pipe, 32 mm dia brass chromium plated waste coupling for glazed ware sinks, basins etc with long screw shank and fly nuts flanged and bedded in red lead in cement and other end fixed, complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and as directed.

S&F 15 mm dia pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts complete all as specified and as directed.

M&L for 150x150 mm salt glazed stoneware gully traps, square or round mouthed, type 'P' complete all as specified and as directed.

S&F PVC valveless, syphonic action type flushing cistern of 10 ltrs capacity low level white with inlet ball valve, float and handle incl brackets, Ist quality complete all as specified and as directed.

S&F 15mm bore GI tubing medium grade with all fitting & fixed to walls & ceiling or laid in trenches / floor complete all as specified and as directed.

S&F 20mm bore GI tubing medium grade with all fitting & fixed to walls & ceiling or laid in trenches / floor complete all as specified and as directed.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part-I complete all as specified and as directed.

S&F Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed.

S&F 18 mm dia towel rail 600mm long SS chromium plated complete all as specified and as directed.

S&F Stop cock of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45 degree with flange of CP fixing to steel pipe or union complete all as specified and directed.

S&F 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 15mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, walls, chajjas etc,shall be carried out as specified below and as directed by Engr-in-charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces mixed with WPC @ 3% by weight of Cement. (b) Preparing plastered surfaces of roof slab,walls, chajjas etc by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminius primer @ 0.70 ltr per Sqm of area complete all as specified. (c) Laying 3mm thick and weighing not less than 3.6 Kg/Sqm APP modified bitumen-based pre-fabricated five layer water proofing membrane reinforced with non woven polyster matt finished over compatible primer at 0.40 Lit/Sqm of density at 25ºC and torch application of membrane with 10cm overlap both ways all as directed by E-in-C. (d) Carrying out test by flooding water for 24 hrs for leekage and seepage and rectifying the same to the entire satisfaction of GE. (e) Finally applying two coats of bitumastic aluminium paint @ 0.15 ltr/Sqm on the top of membrane complete all as specified and as directed.

M & L for Fe-410-W (Gde E-250) quality A, Joist, Channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.

S & F Fe-410-W (Gde E-250) quality A, Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Mild steel, plain, black sheet 0.80mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M& L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base and finishing the surface even and rough to receive topping layer complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crushed stone sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with crushed stone sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L for 150mm dia Reinforced concrete pipes, class NP3, laid and jointed with collars complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes incl forming cradle for 150mm bore pipe complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching to manhole complete all as specified and as directed.

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement motor 1:6 complete all as specified and as directed.

M & L for Rendering 15 mm thick in cement motor 1:4 on brick surface finished even and smooth mixed with WPC @ 3% by weight of cement complete all as specified and as directed. (Note : WPC shall be measured and paid seperately)

M&L for rendering 15 mm thick in two layers, 5 mm thick in CM 1:4 over a coat of 10 mm thick in CM 1:6 surface finished with sponge finish complete all as specified and as directed.

Supply only integral water proofing compound of approved make complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed.

M&L for providing precast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in manhole cover set in cm 1:4 including necessary formwork complete all as specified and as directed. (Note : The reinforcement shall be measured and paid seperately under respective items of this BOQ)

M&L for 75 mm thick (average thickness) PCC 1:2:4 type B-1 using 12.5mm graded stone aggregate mixed with and including liquid water proofing compound @ 200ml / bag of cement as in roof padding complete all as specified and as directed.

E/M PORTION (NOTE : All items regarding excavation and earth work as well as other common items to be executed under E/M portion of this BOQ shall be measured and paid under relevant items of B/R Portion. No claim of contractor on this account shall be entertained.)

M & L for point wiring of any length complete with two single core 1.5 sqmm single core multistranded copper conductor PVC insulated unsheathed (FRLSH) cable 1100 volt grade ISI marked drawn in and including stove enamelled steel conduit of suitable size and flame proof accessories like glands, bends, Tees, junction boxes etc including 1.5 Sqmm PVC insulated unsheathed single core copper multistranded conductor cable as a earth wire, fixed on surface of wall / ceiling etc complete all as specified and directed for:- (Note : The quoted rates shall deemed to be included in circuit wiring upto switch box.)

One light point controlled by one flame proof switch complete all as specified and directed.

One fan point controlled by one flame proof switch and regulator complete all as specified and directed.

One 3 pin 5 Amps flame proof Socket outlet point controlled by one flame proof switch on independent board complete all as specified.

All as per item No. 104.00 above but with 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps flame proof socket outlet point on independent board complete all as specified and as directed.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 230V complete all as specified and directed.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed.

S&F flame proof fan regulator confirming to cat No RI/OA/1010 of Make: Sudhir or equivalent in specified make as approved complete all as specified and as directed.

S&F LED light fitting 1x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

All as above item No 109.00 above but 2 X 8 watt complete all as specified and as directed.

S & F flameproof ceiling fan 1200mm sweep, single phase, 250 volt and connecting with and including provision of 3 core FRLSH PVC insulated copper cable of size 23/0.19 complete all as specified and directed by Eng-in-charge.

S & F flame proof exhaust fan 380mm sweep 0.25HP, 1440 RPM, 2350 CFM, single phase including louvers conforming to Cat No EF/140 of Make: Sudhir or equivalent in specified make as approved complete all as specified and as directed.

S & F flameproof SPN DB 8 way along with incoming DP 63A-01 No and outgoing MCB SP-06 Nos and termination box complete all as specified and directed by EIC.

S & F flameproof security light/ flood light fitting 45 watt including necessary accessories, clamps complet fitting as per site requirement complete all as specified and as directed.

M & L for chemical earthing Earthing Electrode Outer Pipe in Gl and having minimum diameter of 76mm & 3mtr In length Inner pipe to have minimum diameter of 32mm Both ends properly welded to make them airtight GI Terminal size of 100X50X6mm with 2 nos M8 holes for Termination Area in between 2 pipes filled with Dry type chemical powder having high conductivity with no air pockets Electrode must be tested for Short Circuit Test of minimum 40kA at CPRI/NABL, the back fill compound should be carbide based having very high electrical conductivity and high water retaining capacity complete including Earth Pit Cover Square 300X300X240mm to be provided to cover the Earth pit all including boring (120mm dia , 3.5m depth) installation transportation earth work testing soil condition connected to and incl GI strip 32x6mm and GI pipe 40 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment and including PVC cover including excavation and earth work in any type of soil and testing on completion etc complete all as specified and as directed. (NOTE: - The quoted rate shall include supply and fixing PVC Sintex box (side open) with clamps including base insulator for mounting of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed and connecting GI earth strip 32x6mm. Earth strip and protection pipe beyond 7.5m will be measured and paid separately)

Supply, laying / fixing on wall with clamps and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sqmm 2 core complete all as specified and as directed.

M & L for Cutting of road/hard standing and making good with PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

Supply and laying 40 mm outer dia, double walled corrugated (DWC) HDPE conforming to IS with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long with all accessories such as clamps, nuts & screws complete all as specified and as directed.

S&F Aluminium strip 25 x 3.15mm including epoxy base insulator at every 1 Mtr horizontal distance and 1.2 mtr at vertical distance complete all as specified and as directed.

M&L for Galvanised Iron strip of size 32mm X 6mm burried in ground complete with all accessories all as specified and as directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw with all accessories and base insulator complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in block of required size for holding air termination rod / strip on roof complete all as specified and as directed.

S&F GI tubing light grade 40mm bore of length 1.5 mtr including hold fastners for support, MS clamps, bolts, washers for air ternination support etc. complete all as specified and as directed.

SUJATA CONSTRUCTION (BID ID -3268086)