Construction of Public Distribution shop Building In Kezhaperumpallam Panchayat Sembanarkoil Block

Construction of Public Distribution Shop in Kezhaperumpallam Panchayat

Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift such as sand or other loose soil, wet sand not under water silt and ordinary soil, sandy loom, and hard stiff, black cotton soil, red earth, earth mixed with

Filling with good river sand into foundation and basement including cost and conveyance of all materials to work site and all labourcharges for filling, watering etc., complete.

CC 1:4:8 Mix using 40mm ISS Size HBG Metal including cost and conveyance of all materials to worksite and all labour for watering, curing and all lead of good water and all labour and all other incidental charges etc complete

Brick work in following Cement Mortar 1:5 using best quality II class table moulded bricks 8"3/4 x 41/4" X23/4" for foundation and basement including curing etc.,complete complying with standard specification.including scaffolding curing cost of reinforcement etc.all complete as per specifications and drawings as directed by the Engineer in-charge.

Brick work in following Cement Mortar 1:5 using best quality II class table moulded bricks 8"3/4 x 41/4" X23/4" for foundation and basement including curing etc.,complete complying with standard specification.including scaffolding curing cost of reinforcement etc.all complete as per specifications and drawings as directed by the Engineer in-charge.

R.C.C 1 : 1.5 :3 using 20 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

R.C.C 1 : 1.5 :3 using 20 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).

Steel - Fe 500 D: Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

Special ceiling Plastering in CM 1:3 ,10mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Flooring with granolithic flooring to 25mm thick using cement concrete 1:2:4 mix using 20mm ISS size HBG metal, including cost and conveyance of all materials to worksite and all labour for watering, curing and all leads for good water and all labour and all other incidental charges etc., complete

Paving the floor with scratch proof ceramic tiles of approved colour and size in CM 1:3, 20mm thick and pointing with white cement using 0.4 Kg/Sqm mixed with colouring pigments to suit the colour of the tiles including finishing the joints neatly complet,.

Dadooding Wall With Glazed tilesof approved colour and size in CM 1:2 10mm thick and pointing with white cement using 0.4 kg/sqm mixed with colouring pigments to suit the colour of the tiles including finishing the joints nearly complying with std. Spec,..

Finishing the top roof of with one course of pressed tiles in CM 1:3 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Rolling shutter size 1.80x 2.10 m

Steel Door 0.75 x 2.10 m

Supply of window of size 0.90x 1.30 m

Supply of window of size 0.75x 0.90m

Supply of Ventilator of size 0.90 x 0.30 m

Labour charges for fixing Rolling shutters along with frames in position etc., complete (finished work)

Labour charges for fixing doors along with frames in position etc., complete (finished work)

Labour charges for fixing windows and ventilators along with frames in position etc., complete.

Painting the plastered wall surfaces with two coats Oil bound distemper (inside the building) of approved quality and colour over one coat of wall primer including clearing surface in all floors etc complete with standard specification

Painting the plastered wall surface with two coats of Plastic Emulsion Paint of approved colour including preparation of surface and finishing of outside the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification.

Painting two coats over iron steel works with ready mix paint of approved colour and trade including cost and conveyance of all materials and all other labour charges etc., complete.Old Iron

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 62

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 67

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 80

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 106

Towards CFL bulb

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package}