REPAIR MAINTENANCE OF INTERNAL WIRING IN CERTAIN BLDGS AT CDM CDM MAIN BLDG TRG AREA IT CENTRE LIBRARY OFFICERS MESS VIVEKANANDA AUDITORIUM ASHOKA HALL SWARG COMPLEX MES QTRS DHRUVA OFFICERS ENCLAVE UNDER AGE EM N OF GE NORTH SECUNDERABAD

Amount

Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.

Disconnecting and removing the MCB DBs from any height ,stripping out the fitting for examine replacement of US spare parts, reassembling, refixing in original position including minor repairs for the smooth functioning and testing complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked concealed in walls/on surfaces etc., with sunk type pressed steel terminal boxes with suitable size for mounting of modular switches including fixing/grounting sunken/surfaces as per site requirement covered with suitable modular white cover plate for fixing switches/sockets/regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete for the following :- (a) One light / fan point controlled by one, one way switch 5 amps, single pole

(b) One light point controlled by two two way switch 5 amps, single pole

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One bell point controlled by one one way switch 5 amps SP.

All as per item No. 3.00 here in before but using 2.5 square millimetre single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 square millimetre copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

All as per item No. 3.00 here in before but using 4 square millimetre single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 4 square millimetre copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

Material and labour for point wiring complete with multistranded copper conductor of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS confirming to IS - 694 multistranded drawn through the PVC casing and capping 20/25 mm wide, with new sunk type pressed steel terminal boxes with suitable size for mounting modular switches including fixing /grounds sunken surfaces as per site requirement covered with suitable modular cover plate for fixing switches/Sockets/regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 Volts grade FRLS confirming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete for the following:- (a) One light point / Fan point controlled by one, one way switch 5 amps, single pole

(b) One light point controlled by two two way switch 5 amps, single pole

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One bell point controlled by one one way switch 5 amps SP.

All as per Sl item No 10 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor complete all as specified and directed.

Supply and fix Switch MODULAR 1 WAY 6 amps, 1 module complete all as specified and directed.

Supply and fix Modular switch one way, 16 Amps, 1 Module 230 volts complete all as specified and as directed.

Supply and fix Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

Supply and fix bell push MODULAR type 6 amp SP, 230 volt AC complete all as specified & directed.

Supply and fix MODULAR type socket outlet multipurpose 2/3 pin 6 amps combined 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix MODULAR type socket outlet multipurpose 2/3 pin 6/16 amps combined 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix 5 stepped type , heavy duty, Modular type 2 module ceiling fan regulator AC 230 volts complete all as specified and as directed

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked and existing pressed steel terminal boxes including fixing/grounting sunken/surfaces as per site requirement covered with 3 mm thick laminated sheet for fixing switches/sockets/regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete for the following :- (a) One light / fan point controlled by one, one way switch 5 amps, single pole

(b) One light point controlled by two two way switch 5 amps, single pole

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One bell point controlled by one one way switch 5 amps SP.

All as per Sl item No 23 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor complete all as specified and directed.

Supply and fix for switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

Supply and fix for bell push, flush type one way 5 Amps single pole complete all as specified & directed.

Supply and fix socket outlet 2 in 1, flush type multi purpose 3 pin, 5 Amps complete all as speicified and directed.

Supply and fix Switch socket combination 2 in 1, 2/3pin, 5 Amps 230 Volts flush type complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 3/5 pin, 5 and 15 Amps flush type complete all as specified and directed.

Supply and fix Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed

Supply and fix electronic 5 stepped type , heavy duty, ceiling fan regulator working on AC 230 volts complete all as specified and as directed

supply and fix buzzer working on 230 volts single pole AC supply complete all as specified and as directed.

supply and fix bell ding dong type working on 230 volts single pole AC supply complete all as specified and as directed.

Supply and fixed in repairs lamp holder insulated body surface Bakelite with back plate suitable for angle/ batten fittings complete all as specified and as directed

Supply and fix wall mounted LED batten integrated electronic driver 1 x 09w/10w, 230 volts including 02 Nos PVC round blocks with all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:C&S LTDC01210WLED/WD, Havells cat No-LUMINEPLUSBS10WLED865PCSS and WIPRO Cat No- LL20-111-010-65NE3

Supply and fix wall mounted LED batten integrated electronic driver 1 x 18w/20w, 230 volts, including 02 Nos PVC round blocks with all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W complete all as specified and as directed. MAKE: C & S Cat Part No - LTDC01220WLED/WDI Havells Cat Part No- LHFYBYPNIAW022 including Tube Rod Cat No LHLDDBXEUL7Z020 and Bajaj Cat Part No- BLRB21W CWC including Tube rod Cat No - BLRB21W CWC.

Supply and fix recessed mounted LED downlighter of 1x3watts spot light complete all as specified and as directed.

Supply anf fix LED security light luminaire fitting of 1x25 watts with deep drawn housing including all accessories with 25 mm dia GI pipe bracket light grade 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed. Make: C&S Cat Part No- LTESS10x2.5HPLED, Havells Cat Part No-LHETAXU7PA6S025 and Bajaj Cat Part No-BCLST25WLED

Supply and fix recess mounting indirect with perforated sheet and electronic driver luminaire 36 watts LED soft line new with central opal diffuser series mounted in ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting, including 36 watts LED lamp complete all as specified and as directed. Make: C&S Cat Part No- LTCRSLM36WATT2'x2', Havells Cat Part No-.LHECDIL5PPIW036 and WIPRO: CRCO23R036HP65G4

Supply and fix 15/20 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light complete all as specified and as directed. Make:C&S SIRUS/20W, Havells cat No- RUGBY

Supply and fix MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix MCB SPN 40 to 63 amps 240 volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix MCB FP 415 volts suitable for fixing in MCB DB of capacity 100/160 amps complete all as specified and as directed.

Supply and fix MCB TP 415 volts suitable for fixing in MCB DB of capacity 63/40 amps complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB SPN 4 Way with 200 Amps rated bus bar, 240 Volts, double door with magnetic locking system complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB SPN 8 Way with 200 Amps rated bus bar, 240 Volts, double door with magnetic locking system complete all as specified and as directed.

Supply and fix Horizontal type TPN distribution board 4 way double door made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accomadated suitably in a mild steel enclosure weather proof made out of 3 mm thick mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed.

Supply and fix Horizonal type TPN distribution board 6 way double door made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accomadated suitably in a mild steel enclosure weather proof made out of 3 mm thick mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed.

Supply and fix Horizontal type TPN distribution board 8 way double door made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accomadated suitably in a mild steel enclosure weather proof made out of 3 mm thick mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed.

Supply and fix Horizontal type VTPN distribution board 6 way double door suitable for MCCB 160 Amps made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accomadated suitably in a mild steel enclosure weather proof made out of 3 mm thick mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed.

Supply and fix Horizontal type VTPN distribution board 8 way double door suitable for MCCB 160 Apms made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accomadated suitably in a mild steel enclosure weather proof made out of 3 mm thick mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed.

Supply and fix single pole & Neutral enclosure with a two pin and earth plug and socket metal card with single pole MCB 20 Amps 240 volts complete all as specified and as directed.

Material and labour for sub main wiring with two runs of single core 4 sqmm FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 4 square mm and drawing through PVC conduit with accessories of 25 mm dia along with one run of 4 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, including removing the existing unserviceable wiring, connecting to main board and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 2 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour for sub main wiring with two runs of single core 6 sqmm FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit with accessories of 25 mm dia along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, including removing the existing unserviceable wiring, connecting to main board and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 2 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour sub main wiring with 4 runs of single core10 sqmm PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit concealed and conduit accessories of medium grade not less than 25 mm dia including one run of single core 10 sqmm PVC insulated unsheated multistandard 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from distribution board to distribution board main board including removing the existing unserviceable sub main wiring and making good the disturbed wall surfaces to match with the sorroundings complete all as specified and as directed. Note: 4 runs of 10 sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour sub main wiring with 4 runs of single core 6 sqmm PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit concealed and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheated multistandard 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from distribution board to distribution board main board including removing the existing unserviceable sub main wiring and making good the disturbed wall surfaces to match with the sorroundings complete all as specified and as directed. Note: 4 runs of 6 sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour for sub main wiring with two runs of single core 4 sqmm FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 4 square mm and drawing through existing PVC conduit with accessories along with one run of 4 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, including removing the existing unserviceable wiring, connecting to main board and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 2 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour for sub main wiring with two runs of single core 6 sqmm FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 6 square mm and drawing through existing PVC conduit with accessories along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, including removing the existing unserviceable wiring, connecting to main board and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 2 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate No 3 of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia CTD bars @ 100mm centre to centre both ways, in lieu of CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete in addition to item No. 3(a) to (e) of preamble (Notes) under sub heading earthling, specified in SSR Part II

Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earting etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Material and labour for cutting chases, pining to making good to facing where ever required and pointing in cement motor 1:3 to ends or edgs of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding10 cm grith complete all as specified and directed

Supply and fixed in repairs switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

Supply and fixed in repairs switch piano, flush type single pole, one way 15 Amps complete all as specified and directed.

Supply and fixed in repairs Switch MODULAR type 1 WAY 6 amps, 1 module complete all as specified and directed.

Supply and fixed in repairs Switch MODULAR type 1 WAY 16 amps, 1 module complete all as specified and directed.

Supply and fixed in repairs switch piano, flush type single pole, two way 5 Amps complete all as specified and directed.

Supply and fixed in repairs Switch MODULAR type 2 WAY 6 amps, 1 module complete all as specified and directed.

Supply and fixed in repairs bell push 5 Amps flush type SP, 230 volts AC complete all as specified and directed.

Supply and fixed in repairs Modular bell push 6 Amps one module SP, 230 volts AC complete all as specified and directed.

Supply and fixed in repairs MODULAR type socket outlet multipurpose 2/3 pin 6 amps combined 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fixed in repairs MODULAR type socket outlet multipurpose 2/3 pin 6/16 amps combined 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fixed in repairs socket outlet 2 in 1, multipurpose 3 pin 5 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs socket outlet 2 in 1, multipurpose 3 pin 5/15 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs socket combination 2 in 1, multipurpose 2/3 pin 5 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs socket combination 2 in 1, multipurpose 3/5 pin 15 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs electronic 5 stepped type , heavy duty, Modular type ceiling fan regulator, 2 Module, suitable to work on 230 volts complete all as specified and as directed

Supply and fixed in repairs electronic type ceiling fan regulator 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed

supply and fixed in repairs buzzer working on 230 volts single pole AC supply complete all as specified and as directed.

supply and fixed in repairs bell ding dong type working on 230 volts single pole AC supply complete all as specified and as directed.

Supply and fixed in repairs lamp holder insulated bosy surface Bakelite with back plate suitable for angle/ batten fittings complete all as specified and as directed

Supply & fixed in repairs wall mounted LED batten of 09/10 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and as directed. Make:C&S LTDC01210WLED/WD, Havells cat No-LUMINEPLUSBS10WLED865PCSS and WIPRO Cat No- LL20-111-010-65NE3

Supply & fixed in repairs wall mounted box type LED batten suitable for 18w/20w with LED lamp along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core 1.5 sqmm of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make:C&S LTDC01220WLED/WDI, Havells cat No-LHFYBYPN1AW022 incl Tube Rod cat No-LHLDDBXEUL7Z020 and Bajaj Cat No- BLRB21W CWC incl tube rod cat No- BLRB21W CWC.

Supply & fixed in repairs Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and as directed. Make .C&S:LTESS10X2.5 HPLED, Havells : LHETAXU7PA6S025 and Bajaj : BCLST25WLED

Supply & fixed in repairs bracket made out of GI pipe 40 mm dia light grade 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed.

Supply and fixed in repairs MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fixed in repairs of MCB SPN 40 to 63 amps 240 volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply & fixed in repairs MCB TP 415 volts suitable for fixing on MCB DB of capacity 32/40 Amps complete all as specified and as directed .

Supply & fixed in repairs MCB FP 415 volts suitable for fixing on MCB DB of capacity 63/100 Amps complete all as specified and as directed .

Supply & fixed in repairs MCCBs 415V,10KA, 63/100 amps 3 Pole suitable for DB complete all as specified and as directed .

Supply & fixed in repairs MCCBs 415V,10KA, 125/160amps 3 Pole suitable for DB complete all as specified and as directed .

Supply and fixed in repairs CFL Lamps retrofit type 4 pin 36 watts capacity horizontal type complete all as specified and as directed

Supply and fixed in repairs CFL Lamps retrofit type 4 pin 18 watts capacity horizontal type complete all as specified and as directed

Supply and fixed in repairs LED Lamps 2 pin 9 watts capacity horizontal type complete all as specified and as directed

Supply and fixed in repair Tube Rod suitable for 1 x 28 T-5 Watts slim FTL fitting complete all as specified and as directed

Supply and fixed in repair Tube Rod suitable for 1 x 18/20 T-5 Watts slim FTL fitting complete all as specified and as directed

Supply and fixed in repairs LED retrofit tube rod domestic 18/20 watts complete all as specified and as directed. Make .C&S:LT4F20WLEDT8/WDI, Havells : TITAN IASLEEK1149T5DSTL18WLED865SPC and Wipro : LL 13-181-65SE

Supply and fixed in repairs Ballast electronic suitable for 36 Watts CFL fitting complete all as specified and as directed

Supply and fixed in repairs Ballast electronic slim suitable for T-5, 28 Watts FTL fitting complete all as specified and as directed

Supply and fixed in repairs copper wound ballast suitable for 18/20 Watts CFL fitting complete all as specified and as directed

Supply and fixed in repairs Ballast electronic suitable for 1 x 36 Watts FTL fitting complete all as specified and as directed

Supply and fixed in repairs Electronic Driver for LED Light of 40 watts complete all as specified and as directed

Supply and fixed in repairs Starter 40/36/ 20Watts, 230Volts complete all as specified and as directed

Supply and fixed in repairs Bi pin holder suitable for 40 / 28 Watts tubes(pin & screw type) complete all as specified and as directed

Supply and fixed in repairs CFL holder suitable for 2/4 Pin for 9 to 36 Watts complete all as specified and as directed

Supply and fixed in repairs Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed

Supply and fixed in repairs PVC Round blocks complete all as specified and as directed

Supply and fixed in repairs PVC Dummy sheets circular type of 4" complete all as specified and as directed

Supply and fixed in repairs PVC Dummy sheets circular type of 6" complete all as specified and as directed

Supply and fixed in repairs Rigid PVC casing & capping 20/25 mm wide with necessary accessories complete all as specified and as directed

Supply and fixed in repairs PVC rectangular box (Gang box) with switch socket outlet 2/3 Pin, 5 Amps 240 Volts complete all as specified and directed.

Supply and fixed in repairs PVC rectangular box (Gang box) with switch socket outlet 3/5 Pin, 5/15 Amps 240 Volts complete all as specified and directed.

Supply and fixed in repairs PVC wire of Flexible cord with copper conductor multistranded of Twin core complete all as specified and as directed :

Supply and fixed in repairs PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, single core of 1.5 square mm complete all as specified and as directed :-

Supply and fixed in repairs PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, single core of 2.5 square mm complete all as specified and as directed :-

Supply and fixed in repairs PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, single core of 4 square mm complete all as specified and as directed :-

Supply and fixed in repairs PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, single core of 6 square mm complete all as specified and as directed.

Supply and fixed in repairs 10 Square millimetre PVC insulated, un sheathed, twin core, 1100 volts grade, multistanded flat un armoured aluminium conductors complete all as specified and as directed.

Supply and fix in repairs CFL Lamps of 85 Watts capacity complete all as specified and as directed.

Supply and fixed in repairs Plug top 5 Amps 3 pin 250 Volts complete all as specified and as directed.

Supply and fixed in repairs Plug top 15 Amps 3 pin 250 Volts complete all as specified and as directed.

Taking down the ceiling/exhaust fan of any sweep/make for over hauling i.e. opening of fan and cleaning ball bearing, filling grease/oil and changing of u/s cotter pin, nut, screw, check nuts and bolts as required incl. cleaning of body, blades, down rods, canopies etc and re-assembling & hanging the same in the position complete all as specified and as directed. Note: Spare parts will be measured and paid seperately under respective items of schedule.

Supply and fixed in repair capacitor 2/2.5 mfd complete all as specified and as directed .

Supply and fixed in repair capacitor3.15/4 mfd complete all as specified and as directed .

Supply and fixed in repair ball bearing/Gun metal Bush of exsiting ceiling fans complete all as specified and as directed .

Supply and fixed in repairs Flexible copper wire cable, three core of size 23/0.0076" complete all as specified and as directed .

Supply and fixed in repairs Rubber bushes with 'U' type MS clamp, compleate with bolt, nut and split pins of heavy duty suitable to existing ceiling fan complete all as specified and as directed .

Supply and fixed in repairs M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed .

Supply and fixed in repairs Nut and bolts washers for fan blades fixing of ceiling fan of any make/size/type (6 Nos for each set) complete all as specified and as directed .

Material and labour for rewinding the burnt ceiling / Exhaust fan motor with super enamelled copper wire of any make, type, model including necessary transportation refixing after rewinding and testing complete all as specified and as directed.

Material and labour for Painting of ceiling fans 48"/56" size complete with super enameled synthetic enamel paint by spraying,duly cleaning, scrapping the old paint, filling cavities with filler and applying one primer coat after thorough cleaning oil, dust etc and writing MES No complete duly taking down and refixing after painting complete all as specified and as directed by Engr-in-Charge.

Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works, (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad smell of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : Defective /worn outparts if required shall be measured and paid separetely under relevant items in this schedule.

All as per Sl item No 136 above but 50 litres capacity NOTE: Defective /worn outparts shall be measured and paid separetely under relevant items in this schedule.

Supply and fix rubber PVC gasket to ensure water tightness for 25Litres capacity complete all as specified and as directed

Supply and fix rubber PVC gasket to ensure water tightness for 50 Litres capacity complete all as specified and as directed

Supply and fixmild steel base plate cup of any type with screws of suitable size complete all as specified and as directed

Supply and fix heating element of the 1/1.5 KW rating including rubber washers of any make and type complete all as specified and as directed

Supply and fix heating element of the 2KW rating including rubber washers of any make and type complete all as specified and as directed

Supply and fix steel inner tank for 25/35 litres capacity geyser by made out of steel sheet appropriate thickness complete all as specified and as directed.

Supply and fix steel inner tank for 50 litres capacity geyser by made out of steel sheet appropriate thickness complete all as specified and as directed.

Supply and fix thermostat for the geyser of 25 to 35 litres capacity complete all as specified and as directed

Supply and fix thermostat for the geyser of 50 litres capacity complete all as specified and as directed

Supply & Replace Air Release Valve of Existing Size complete all as specified and as directed

Supply and Replace Indication lamp of Existing Size/Model (Set of Two) Red & Green complete all as specified and as directed

Supply and fix in replacement of PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, 3 core of 2.5 square mm size complete all as specified and as directed

Supply and fix in replacement of metallic louvers mounted suitable for exhaust fan on wall complete all as specified and as directed

Supply and fix in replacement of plastic body including louvers 200 to 300 mm size fan complete all as specified and as directed

Supply and fix in replacement of motor of plastic body exhaust fan 300mm size complete all as specified and as directed

SRI SAI ENTERPRISES