81023 PROVISION OF ROAD FURNITURE FROM HQ GATE TO PANIPAT GATE UNDER GE HADDO, PORT BLAIR

Amount

Supplying and fixing retro reflective cautionary/ warning sign boards of equilateral triangular shape having each side of 900mm with support length of 3650mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc as per IRC 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @20 cm c/c to back support frame of MS angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos MS angles of size 35x35x5 mm to a vertical post (height not less than 2m) made up to MS Tee section ISMT 50x50x6 mm Contd....1/-

welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing MS message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc complete all as specification and directed by Engineer-in-Charge.

Supplying and fixing retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, fact to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-Charge, letters, borders etc as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colur on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete all as per specified and direted by Engineer-in-Charge (Structural frame work including MS plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

Supplying and fixing Retroreflective regulatory sign board of size 900mm dia meter made out of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro reflective sheeting as approved by Engineer-in-Charge. Letter, symbols, borders etc., will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to MS frame of angle iron of size 40x40x4mm. The boards willbe fixed to 1 No 50x50mm square post made of MS angle 50x50x4mm, 4m long welded to the frame wit adquate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-Charge.

Supply and fix metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in Plain cement concrete 1:2:4 (150x150x300mm) type B1, nominal mix including formwork complete all as specified and directed by Engineer-in-Cahrge.

Supply and fix cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions including removal of old unserviceable one.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/0.3 watt one Ni-Cd rechargeable battery (1.2V/1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd (Mili Candela) having flash rate 2 Hz as per manufactures instructions etc. complete including removal of old unserviceable one all as specified and directed by Engineer-in-Charge.

Supply and fix Ploy carbonate covex mirror outdoor type 1000mm dia made out of fibre along with bracket of 62.5mm and holding down 1500mm long MS pipe of 75mm dia embedded in Plain cement concrete (nominal mix)1:2:4 of block size 450x450x500mm including two costs of synthetic enamel paint over a coat of red oxide primer on MS pole including excavation in post holes complete all as specified and as directed by Engineer-in-Charge. Make: Frontier polymers Pvt Ltd Model No.FCMO-100 or equivalent in list of makes attached in particular specifications.

Supply and fix rubberised speed breakers of size 500x400x50mm fixed with MS zinc coated screwed nails of size 16mm dia 200mm long including drilling, fixing the nails and sealing compound as required at site complete all as specified and as directed by Engineer-in-Charge

M&L for removing defected speed breakers of any description including filling of holes with cement mortar 1:3 bitumen mix of suitable grade, complete all as speified and as directed by Engineer-in-Charge.

M/S ISLAND REALCON INDIA PVT. LTD

Prasur Electricals & Engineering Co.