REPAIR/ REPLACEMENT OF OLD VINTAGE GI/CI/DI PIPE LINES ,VALVE PITS AND CONNECTED ITEMS UNDER THE AOR OF GE DEOLALI

Amount

Excavation in trenches not exc.1.5 m wide and not exc 1.5 m depth for taking out and laying of water pipe line and getting out in soft/loose soil complete all as specified and directed.

All as per item No 1 above but getting out in hard/dense soil.

Returning, filling in trenches in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removing of excavated material i.e soil not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Taking up or down steel tubing and connection from excavated trenches or in walls or in floor etc 15 mm bore complete.

All as per Srl item No 5 above but 20 mm bore

All as per Srl item No 5 above but 25 mm bore

All as per Srl item No 5 above but 40 mm bore

All as per Srl item No 5 above but 50 mm bore

All as per Srl item No 5 above but 80 mm bore

All as per Srl item No 5 above but 100 mm bore

Supply , lay, connect and test GI tubing 20 mm bore medium grade ISI marked with all fittings laid in trenches etc complete all as specified and as directed.

All as per item No 12 above but of 25 mm bore

All as per item No 12 above but of 40 mm bore

All as per item No 12 above but of 50 mm bore

All as per item No 12 above but of 80 mm bore

All as per item No 12 above but of 100 mm bore

Supply , lay, connect and test GI tubing 15mm bore medium grade ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs gun metal globe or gate valve with iron wheel head screwed both end for iron pipe and fixed of 50 mm bore

All as per item No 19 above but 40 mm bore

All as per item No 19 above but 25 mm bore

All as per item No19 above but 20 mm bore

All as per item No 19 above but 15 mm bore

Cutting the existing road surface i.e.surfacing WBM soiling any type of soil etc and making suitable trench of minimum 100mm x 60 cm deep along the cross section of road for laying GI/CI Pipe, returning refilling, filling and well ramming and removal of surplus surface soil to a distance not excedding 50 m and repair to road surface to match the existing specifications complete.

Cutting the existing CI/GI distribution main in position for taking out branch/tapping connection of up to 300 mm bore etc.

Supply & fix in repairs mechanical joint ( CID joint) of following sizes:-

(a) 80mm bore

(b) 100mm bore

(c) 150mm bore

(d) 200mm bore

(f) 300mm bore

Supply and fix in repairs/ installation and testing of cast iron sluice valve,heavy duty class-I, ISI marked, conforming to I S 14846, long body type, pressure type PN-1.6, flanged ends and drilled having brass steel spindle with iron head wheel at the top complete with and including nuts, bolts, washer, rubber gasket and jointing complete all as specified and directed of following sizes:-

(a) 80mm bore

(b) 100mm bore

(c ) 150mm bore

(d) 200mm bore

(e) 250mm bore

(f) 300mm bore

Labour only for burning out lead joint in position including removing of old lead complete all as directed for the following sizes of pipes:-

(a) 80mm bore

(b) 100mm bore

(c ) 150mm bore

(d ) 200mm bore

(e ) 300mm bore

Material and labour for run lead joint including spun yarn and caulking complete all as directed for the following sizes of spigot and socket pipes :-

(a) 80mm bore

(b) 100mm bore

(c ) 150mm bore

(d ) 200mm bore

(e ) 300mm bore

Taking up existing CI pipe lines from exacavated trenches including removing/burning of lead joints/spit joint socket end for the following sizes:-

(a) 80mm bore

(b) 100mm bore

(c ) 150mm bore

(b) 200 mm bore

(c ) 300 mm bore

Material and labour for CI spun pipes centrifugally cast Class LA suitable for tyton joint (rubber ring ) of the following sizes complete all as specified and all as directed :-

(a ) 300 mm bore

(b) 200 mm bore

(c)150 mm bore

(d)100 mm bore

(e) 80 mm bore

Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 80mm dia.complete all as specified and as directed.

Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 100mm diacomplete all as specified and as directed..

Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 150mm diacomplete all as specified and as directed..

Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 200mm diacomplete all as specified and as directed..

Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 300 mm dia complete all as specified and as directed.

M&L for Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 200 mm to 300mm.

Taking out the existing unserviceable NRV of any make/model and supply and fix new NRV ( ISI Mark)of CI body threaded/flanged end, drilled of both ends of PN-1 flap type without by pass arragement all as required at site including nut/bolts and fixing in position including provn of rubber gasket nut bolt etc all as specified and directed by Engr-in-Charge of the following sizes:-

(c) 300 mm bore

M & L for construction of valve chamber with brick masonry in CM 1:6 of size 1200mm x 1200mmx 1200 mm(Internal diamension) with 15 cm thick PCC foundation in PCC 1:4:8 type D2 (using 40 mm graded stone agreegrate ) 15 mm thick plaster in CM 1:6 , 3 mm thk MS sheet cover including 40x40x6 mm MS angle iron frame fixed in PCC coping made out with PCC 1:2:4 type B1 (using 20 mm graded stone agreegate ) with neccessary locking arrangement and painted with two coats of synthetic enamel paint over a coat of red oxide primer on all exposed steel surfaces including necesary excavation and earth work in any type of soil , returning and filling in and raming and removal of surplus spoil and demolition of existing valve chamber all as specifieed and directed by Engineer-in-charge.

M & L construction of valve chamber with brick masonry in CM 1:6 of size 900mm x 900mmx 900 mm(Internal diamension) with 15 cm thick PCC foundation in PCC 1:4:8 type D2 (using 40 mm graded stone agreegrate ) 15 mm thick plaster in CM 1:6 , 3 mm thk MS sheet cover including 40x40x6 mm MS angle iron frame fixed in PCC coping made out with PCC 1:2:4 type B1 (using 20 mm graded stone agreegate ) with neccessary locking arrangement and painted with two coats of synthetic enamel paint over a coat of red oxide primer on all exposed steel surfaces including necesary excavation and earth work in any type of soil , returning and filling in and raming and removal of surplus spoil and demolition of existing valve chamber all as specified and directed by Engineer-in-charge.

Supply and fixing Cast Iron Air Release valve with double air outlets confirmity to IS 14845 of size 80 mm dia and fixing up to cast iron water supply mains complete including nut, bolt, washers and gasket etc all as directed by Engineer-in-Charge

Note: Amount of sch of credit of Rs.95,669.00/-will be deducted from total amount of BOQ.

Vinod Enterprises

DHARMESH ENTERPRISES

KOYNA ENGINEERS PVT LTD