Shifting of Sports Science Misc. Functional requirements at NS NIS Patiala

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Two coats

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.|. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50 to mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed the floor and ceiling at the spacing of 610 mm cenire to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wal screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin Glass board Reinforced Gypsum (GRG) plaster conforming to IS: 2095: part 3 (Board with BIS certification marks)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and laying 5 mm thick polyvinyl flooring sheet of approved make and shade, including surface preparation, cleaning, and leveling of the existing floor as required. The polyvinyl sheet shall be fixed using approved adhesive, ensuring uniform bonding and smooth finish. The adjoining joints shall be heated and fused using a gun-type welding tool, and all joints shall be sealed properly to achieve a seamless, durable, and hygienic surface.

The colour and pattern of the polyvinyl sheet shall be as approved by the user department or as per the direction of the Engineer-in-Charge. Complete in all respects, including labour, tools, adhesives, jointing material, and finishing, as directed.

Uninstallation, Shifting, and Re-installation of Aluminium–Glass Cabin . Carefully uninstalling the existing aluminium–glass cabin installed at the S&C Fitness Center, including dismantling of aluminium sections, glass panels, door frames, fixtures, and related components without causing damage to any part. The dismantled components shall be safely shifted and transported to the finalized location earmarked for the S&C Hall at the Ground Floor. Re-installation shall include refixing of aluminium sections, glass panels, doors, hinges, beading, rubber gaskets, locks, and all necessary fittings, using skilled workers to ensure proper alignment and finish. The work shall also include providing additional aluminium pieces, hardware, screws, anchors, sealant, and fixing tools as required for completing the cabin installation in the new location. The job shall be executed complete in all respects, ensuring stability, airtightness, and proper functional condition of the reinstalled cabin, all as directed by the Engineer-in-Charge.

Providing and Fixing of Glass PVC Film Providing and fixing high-quality PVC glass film on existing glass surfaces to regulate and reduce direct sunlight, ensuring improved visibility and better screen viewing conditions for project-based work. The film shall be of reputed make and shade, offering adequate light control, glare reduction, and UV protection. The work includes cleaning of glass surface, cutting the film to size, applying with approved adhesive, removing air bubbles, and finishing the surface smoothly with proper tools. All edges shall be neatly trimmed and pressed to ensure long-term adhesion. The shade and transparency level of the PVC film shall be as approved by the user or as directed by the Engineer-in-Charge.

Making the glass window within the exosting wooden door cutting and making bracket fixing of transperent glass with approprite size apr. 0.15 mx0.15m complete fix. With required arrangement and color matchings

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and Fixing ACP sheet for Door of approved quality with the spectification confirming to IS complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper