Karnataka

Active

Works

Bridges

Construction of bridge at Ch 95.67KM on Shrirangapatna- Arasikere road (SH-07) in Arasikere Taluk.

Public Works Department

PWD Division Office Hassan | Hassan, Karnataka

Amount: ₹80.5 LCloses: 17 Sept 2026

Timeline

Published8 Sept 2026
Closes17 Sept 2026
Bid Opening18 Sept 2026

Tender Value

₹80.5 L

EMD Value

₹1.6 L

Closing Date

17 Sept 2026, 4:00 pm

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

JAYANNA R

Office Number

Work Description

Construction of bridge at Ch 95.67KM on Shrirangapatna- Arasikere road (SH-07) in Arasikere Taluk.

Tender Information

Tender ID

PWD/2026-27/BG/WORK_INDENT42938

Reference Number

PWD/2026-27/BG/WORK_INDENT42938

Tender Type

Open

Product Category

Bridges

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Hassan

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredContractors has to upload the EPF Registration

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2021-22 to 2025-26 as per KW-3 Rs.80.50Lakhs

RequiredWork done certificate as per KW-3 50 percent amount put to tender i.e., 2021-22 to 2025-26 Rs.40.25Lakhs certificate should be issued not below the rank of Executive Engineer Updated to 26-27Price level

RequiredLine of credit as per KW-3 Rs.24.15Lakhs

RequiredAssessed available tender capacity AxNx2.5 -B should be greater than or equal to Rs.80.50 Lakhs

RequiredMinimum quantities of work 1. Earth work-2229.00 Cum, 2.GSB 154.00Cum 3.WMM 188.00Cum 4.Concrete210.00Cum 5.Steel 14.00 Tonnes6.Asphalt 91.00Cum

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. The Tender processing fee shall not be refundable.

The employer reserves the rights to reject one or all Tender without assigning any reasons and Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer is not responsible for any delay in accessing E-Procurement Portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Successful bidder has to furnish 0.1% of award contract amount as insurance during entering in to agreement.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractors should be registered with KPWD Class III and above Registration

To qualify for award of this contract, each tenderer should give all details and documents as per KW-3 and Work should be carried out as per KW-3STD attached with tender .

The period of completion of this work is 6 Months & the eligible contractor should maintain the work for One YEAR after the successful completion of the project.

Contractors has to upload the EPF Registration and Contractors has to submit their labour EPF details with every Running Bill. Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

Estimate rates are excluding GST as per govt Circular No:FD 417 Exp-12/2024, Banglore Dtd:09.08.2024 and prevailing GST (18% of amount put to tender) amount is kept in form of Lumpsum in sanctioned estimate. Therefore amount put to tender and ECV amount are excluding GST. But the itemwise rates do not include GST. Hence GST will be paid separately for the Executed amount accordingly.

The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Hassan, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

The FSD payable at the time of executing agreement, will be refunded only after successful completion of Defect Liability Period

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum, the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

The Contractor should upload original scanned copy of Purchase invoice/RC Book/Sale Deed duly attested by Notary along with original purchase invoice/Ownership transfer in RC book/Hire or Lease Agreement duly attested by Notary along with original purchase invoice or RC book

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.10) only. Otherwise tender is liable for rejection.

The Contractor has to establish Field laboratories and should furnish the documents for having required lab testing equipments.

The quantities for the necessary deviation road and cofferdam are provided on a one-time basis in the BOQ and any additional quantities required for completion of the work shall be deemed included in the contractors rates no extra payment shall be admissible and such works shall be executed at the contractors own cost and risk

Confirmations to LOC and work done Certificates uploaded in e-Proc should be received to this office, EE, PWD, HASSAN DIVISION, within 15days from the date of receipt of confirmation request letters to concerned Departments/Banks, otherwise LOC and Work done will be considered as, Not Confirmed and Bids will be Considered for Rejection.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

List of Financial Resources with Certificates

Past Experience

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e.,2021-22 to 2025-26 (b) Mandating Satisfactorily completion as prime contractor, for atleast one similar work to an extent of value not less than Rs. 40.25 lakhs (Updated to 2026-27 Price Level) (usually not less than 50percent cost of the work))

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2 (c) Executed in any one year i.e 2021-22 to 2025-26 the following minimum quantities of work1. Earth work-2229.00 Cum, 2.GSB 154.00Cum 3.WMM 188.00Cum 4.Concrete210.00Cum 5.Steel 14.00 Tonnes 6.Asphalt 91.00Cum usually 80percent of peak annual rate of construction.

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

Capabilities of Vendor

ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity:(AxNx2.5 -B ) should be greater than or equal to Rs80.50 lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (Updated to 2026-27 Price level) N-Number of years prescribed for completion of the works for which tenders are invited-6 Months. B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 6 Months. (Period of completion of the works for which tenders are invited)

Others -- Submit information as per Section 3 of Tender Document

Financial Status

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e.,2021-22 to 2025-26(a) Achieved in atleast two financial years an average financial turnover of Rs. 80.50 Lakhs Updated to 2026-27 Price Level, Usually not less than the estimated cost

Others -- Balance Sheets, Profit & Loss Statements certified from an Registered Chartered Accountant with UDIN

ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs24.15Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually 30percent of the amount of contract) (The fomat should be as per KW-3 Bid document Section-3 Para 1.10)

Others -- Certificate from Schedule Bank in the prescribed form as per KW-4

Others

Contractors has to upload the EPF Registration

Others -- Valid EPF Certificate

KPWD Class-III and above Registration Certificate

Others -- Valid KPWD Registration Certificate

Fee & Financial Details

Tender Fee Amount

₹2,020

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

8 Sept 2026

Published

8 Sept 2026

Bid Opening

18 Sept 2026

Download Ends

15 Sept 2026

BOQ Preview

•

Construction of bridge at Ch 95.67KM on Shrirangapatna- Arasikere road (SH-07) in Arasikere Taluk.

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- With all le...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- With all lead and lift including cost and conveyance of all materials,labour, ...

•

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Rumble Strips - Provision of 15 nos rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locati...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with m...

•

Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...

•

Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Construction of bridge at Ch 95.67KM on Shrirangapatna- Arasikere road (SH-07) in Arasikere Taluk.(Pole Shifting)

•

RCC Pole 9 Mtr Long 145 Kg WL ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,co...

•

Labour For RCC Pole(V-6 ESCOM P.No 44/ 30/2.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incident...

•

Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incident...

•

Labour for Spiral Earth (V-6 ESCOM P.No 44/36/2.08) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other inci...

•

11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other i...

•

Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all o...

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (V-6 ESCOM P.No 5/52.6.06) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all mach...

•

LT 4 Pin Cross Arm GI (V-6 ESCOM P.No 4 I.No 16/2.06) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other in...

•

Labour for 4 Pin Cross Arm (V-6 ESCOM P.No 45 I.No 50/5.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

1.1 kV Polymeric Pin Insulator (V-6 ESCOM P.No 5/51/6.05) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all othe...

•

No. 8 Strain Insulator (V-6 ESCOM P.No 5/53/6.07) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incide...

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other i...

•

Labour for Guy Set (CDS-1) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,compl...

•

HT ST Support 50x8 mm Flat - GI (V-6 ESCOM P.No 4/22/2.12) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all oth...

•

GOS Set 200 Amps Single break (V-6 ESCOM P.No 11/166/24.01) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

Labour for GOS Set(V-6 ESCOM P.No 48/97/13.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidenta...

•

H-Frame for mounting GOS (CDS-15) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc...

•

Labour for H-Frame (CDS-15) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,comp...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machin...

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental...

•

Labour(CDS-24) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,complete as per s...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip( Elec SR Vol-6 P.No.59/12.58.2) ---- With all lead and lift including cost and conveyance of...

•

Releasing & Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (V-6 ESCOM P.No 44/ 30/2.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire...

•

Releasing & Refixing of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support (V-6 ESCOM P.No 45/52/5.04) ---- With all lead and lift including cos...

•

Releasing & Refixing of 4 Pin cross arm with Insulator and Braces fixing (V-6 ESCOM P.No 45/50/5.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of ...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit (Escom Pg 46, I.No 67/7.02) ---- With all lead and lift including cost and conveyance of all ...

•

Releasing & Refixing of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting ...

•

Releasing & Refixing of GOS Set(V-6 ESCOM P.No 48/97/13.02) (1104*1.9) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments...

•

Releasing & Refixing of Labour for H-Frame (CDS-15) (323*1.9) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Reservation lot-2318 KRDCK Bri COW 3Works 200Lakhs.pdf

Others - Reservation lot • 0.03 MB

TN NO 29 Dtd 31-08-2026.pdf

Others - Notification copy • 0.71 MB

I No 42938 kw-3 General.docx

Tender Document • 0.95 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .