Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC C O M KHARKARANG LUMJINGSUK BLOCK A MADANRTING SHILLONG 793021 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793021 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹21.9 L+₹2.0 L (10.2%)Rejected-Finance C O GIVEN GOD NONGTDAU ARBUTHNOT ROAD NONGRIMMAW LAITUMKHRAH SHILLONG PIN 793011 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793011 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹23.7 L+₹3.8 L (19.4%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹27.3 L+₹7.4 L (37.3%)Rejected-Finance 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L4 | Rejected-Finance Being L4 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyanka Tak GE I AF Shillong
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
PROVN OF BARRACK STORE AT AF STATION LIATKOR PEAK UNDER GE I AF SHILLONG
2023_MES_576665_6
8072/22/SHL/2022/23
Open Tender
Civil Works
Item Rate
270 days
GE I AF SHILLONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I AF SHILLONG
₹44,000
Yes
19 Sept 2023
21 Aug 2023
18 Sept 2023
21 Aug 2023
16 Sept 2023
21 Aug 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft or loose soil complete all as specified.
Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out soft/loose soil complete all as specified.
Excavating in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr in depth but not exceeding 3.0 mtr; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out soft/loose soil complete all as specified.
Returning, filling in, trenches including Spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.
Removing of surplus soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.50 metre above the starting point all as directed by Engr-In-Charge.
Material and labour for Hardcore of broken boulder or stone gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.
Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified.
Material and labour for formwork to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
Material and labour for reinforced cement concrete M-25 (design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. Note:- Reinforcement and form work shall be measured and paid including this item.
Material and labour for formwork to sides of rough finished surfaces of concrete square,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions complete all as specified.
Material and labour for reinforced cement concrete M-25 (design mix) as in Columns, pillars, piers, posts and struts complete all as specified. Note:- Reinforcement and form work shall be measured and paid including this item.
Material and labour for formwork to sides and soffits of rough finished flat surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.
Material and labour for formwork to soffits of rough finished flat surfaces of concrete suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified.
Material and labour for reinforced cement concrete M-25 (design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. Note:- Reinforcement and form work shall be measured and paid including this item.
Material and labour for reinforced cement concrete M-25 (design mix) as in beams, cantilevers, bressummers, lintels complete all as specified. Note:- Reinforcement and form work shall be measured and paid including this item.
Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.
Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.
Material and labour for 1:3:6 type C1 using 20 mm graded crushed stone aggregates precast cement concrete block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, complete all as specified. Note: Reinforcement and formwork will be measured and paid including this items
Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.
Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item
M&L for 75 mm thick PCC 1:4:8, type D2 with using 40 mm graded stone aggregate as in sub base of floor rough finished to receive next layer complete all as specified.
Material and labour for 40 mm thick PCC 1:2:4, type B0 using 12.50 mm graded crushed stone aggregates as in floors finished the surfaces even and smooth without using extra cement divided with glass strip of 3 mm thick complete all as specified.
Supply and fix glass dividing strips, 3 mm thick
Material and labour for 75 mm thick PCC 1:3:6, type C2 using 40 mm graded crushed stone aggregates as in plinth protection laid to slope 1:12 and finished the surface even and smooth without using extra cement complete all as specified.
Supply and fix plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E- 250) quality- A complete all as specified.
Supply and fix mild steel screw bolts (machine made) 16 to 20 mm diameter of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5 cm but not exceeding 30 cm long complete all as specified.
Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 including painting with one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified.
Supply and fix steel work in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe 410-W (Gde E- 250) quality A including painting with one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified.
Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described not exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including washers complete all as specified.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or Eaves board, fixed with self tapping screws including washers complete all as specified.
Material and labour for new or previously untreated wall surfaces and applying three coats of white wash with roller finish complete all as per manufacturer instruction
Supply only liquid water proofing compound as per manufacturer instruction.
Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde E- 250) quality A complete all as specified.
Supply and fix, 3 ways sliding anodized aluminium glazed window shutter with frame with the following specification (a) Frame 50 mm x 65 mm x 1.5 mm Thick (b) 35 mm x 35 x 1.5 mm Z section in stiles, rails (c) 35 mm x 35 mm x 1.5 mm T section mullion (d) two shutter with PVC gasket with 4 mm thick tinted glass, including aluminium handles with necessary locking arrangement and one shutter with stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
Material and labour for 80 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 Grade set and joined in cement slurry and pointed in grey cement and no pigment over and including 50 mm thick layer of sand cushioning complete all as specified. Make: Anjali Tiles/ Ultra Tiles Pvt Ltd/ Terra Firma/ Bansal/ Mehtab Tiles/ Nitco
Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures with GI sunken boxes with earth dolly and 3 mm laminated cover sheet suitable for fixing switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)
One light/ fan point/ call bell controlled by one, one way switch
One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.
All as per Item No 38.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size complete all as specified.
Supply and fix as in repairs Switch piano, flush type single pole one way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager
Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager
Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps and 16 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager
Supply and fix as in replacement LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.
Supply and fix as in repairs lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager
Supply and fix as in repairs ceiling rose surface baklite with three terminals 240 V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager
Supply and fix as in replacement sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 8 way 240 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.
Supply and fix as in repair MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE
Supply and fix as in repair MCB SPN 240 volts, 50 Hz capacity 40 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE
Supply and fix exhaust fan, steel body AC single Phase, BEE 5 star rating, 230V of size 300m sweep with, blades, and frame and louvers complete all as specified. Make: Almonard (ISI Marked) / Usha (ISI Marked) / Orient (ISI Marked)/ Bajaj (ISI Marked)/ Havells (ISI Marked) / Crompton Greaves (ISI Marked)
Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.
Material and labour for brick protection for UG XLPE cable with burnt clay old size sub class 'B' bricks laid dry and flat abutting each other with gaps between adjacent brick not more than 10mm and width equal to length of brick in trenches across the cable complete all as directed by Engineer-In-Charge. Make: Best quality locally available which is duly approved by GE.
Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 16 Sqmm 2.0 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Nicco (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately
Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick,buried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel, earth strip protected by and including GI Pipe 40 mm dia bore(light grade) and connected to main test point as directed and including Concrete Pit in PCC (1:3:6) type C1 precast RCC (1:1.5:3) type A1 cover slab 54 X 54 X 5 Cm reinforced with 8mm dia TMT bars@150mmC/C both ways with one handle for lifting made of 8mm dia TMT bar embeded in precast cover slab,funnel,wire mesh , 20 mm bore GI Pipe (medium grade) for watering charcoal and salt in alternate layers, incl necessary excavation and earth work in any type of soil complete all as shown on electrical plate no 3 of SSR part I complete all as specified.
M/s J. C. CONSTRUCTION
M/S BISWA CONSTRUCTION
M/s Gupta Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .