REPAIR TO FANCING, GATES HARD STANDING, DRAIN, PATH AND CONNECTED MISCELLANEOUS WORKS AT MIL STN SURANUSSI UNDER AGE (I) SURANUSSI

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but including ashlar facings dressed stone work and pre cast concrete articles complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level.

Material and labour for brick work built in cement mortar (1: 6) with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, using old size bricks complete all as specified and as directed by the Engineer-in-Charge.

-ditto- as per item no 3 above but except Brick complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone wall as in boundary wall etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer in Charge.

Material and labour for rendering 15 mm thick cement plaster in cement mortar (1:4) of brick / concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two of coats of cement base paint over a coat of alkali primer complete all as specified & directed by the Engineer in Charge.

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in–Charge.

M & L Machine pressed precast conc. interlocking paver block cosmic paver vlock (rectangulat/star etc.) (Red/yellow)any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge.

M & L Machine pressed precast conc. interlocking paver block /cosmic paver block any shape (rectangulat/star with PU coating etc.) (Red/yellow)any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge.

Providing and laying precast cement concrete at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening with PVC Pipe wherever required and apply two coats of plastic emulsion paint over a priming paint plaster coat complete all as specified and directed by Engineer -in charge.

M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates in copings,, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge .

M&L providing precast cement concrete louvres and jallies, with RCC post 50 mm thick (measured solid), type B-0(1:2:4) using 12.5mm graded aggregate including all mould- ings but excluding frame set in cement mortar 1:4 complete all as specified and directed by Engr-In-Charge

Dismantling of galvanised mild steel barbed wire of any description from fencing post (RCC/ Steel) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs galvanised 2 strand steel barbed wire 2.24 mm dia , barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured)

M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors including 20 mm thick screed or bedding layer in CM 1:6 all as specified and directed by Engineer-in Charge

Dismantling fencing wire mesh, any type complete all as specified and as directed by the Engineer-in-Charge.

Fixing of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-in-charge

Supply only Chain link fencing made out of plain mild steel galvinised wire , width of aperature 100 mm x 100 mm x 4mm dia to new steel posts by means of nuts and bolts, complete all as specified and directed by Engineer - in – Charge

Dismantling posts or struts embedded (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S&F for Mild steel angle iron fencing post and sturts in fencing incl necessary cutting drilling welding etc and bending to swan neck shape as required and drilling holes notching for wives etc conforming to Fe-290 Gde E-165 complete all as specified.

M&L Plain Cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in Charge.

S&F mild steel screw bolts 12mm dia(machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n. exc. 15 cm long and dia of shank 5 to 10 mm complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L for preparation of new steel surfaces n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed.

M&L for PCC type D2 1:4:8 using 40 mm graded aggregate as in sub base foundations, filling and mass concrete all as specified and directed

M & L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250) Qyality -B complete all as specified and directed by Engineer - in - Charge .

S&F rolled mild steel Fe 410-W (Gde-E-250) quality-A in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified and directed.

S&F MS flat iron fillets including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

DUGGAL CONSTRUCTION CO (BID ID -3340248)

SONA BUILDERS (BID ID -3344035)

M/s Dinesh Kumar (BID ID -3345814)