Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.6 L+₹39,301.25 (1.26%)Rejected-Finance H NO 01 MADINA BAGH MEHJOOR NAGAR NEAR HOTEL RAFADA SRINAGAR 190015 J K | BUDGAM | JAMMU AND KASHMIR | 190015 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹32.3 L+₹1.1 L (3.56%)Rejected-Finance H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹32.5 L+₹1.3 L (4.12%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹33.1 L+₹1.9 L (5.99%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
9 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
REPAIR REPLACEMENT OF FLOORING PLASTERING ROOFING AND MISC BR WORKS TO BLDGS OF SECTOR A UNDER AGE BR II OF GE 865 EWS
2022_MES_517707_1
865/EWS(NIT-36)/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
8 documents required · 8 mandatory
₹500
GE 865 EWS
₹80,000
Yes
14 Jun 2022
11 Apr 2022
11 May 2022
11 Apr 2022
9 May 2022
25 Apr 2022
60 days
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick rendering in CM (1:4) on other than fair faces of brick work or stone masonary work, including finishing the surfaces with even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement in complete all as specified and as directed
Preparation of newly plastered surfaces of walls and applying two coats of distempering with oil bound distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, over a coat of primer complete all as specified and directed by Engr-in-charge.
M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate) 25 mm thick, as in floors and the like including finishing the surfaces even and rough to receive floor finishes complete all as specified and directed.
Vitrified ceramic tiles 10 mm thick (ligh shade) (square/ rectangular), first quality, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor tiles complete all as specified and directed.
M & L for joint free Non-Skid coloured Ceramic tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for 300 x 200 x 7mm thick coloured glazed ceramic tiles, first quality, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) including 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and as directed.
M&L for (350mm x 250mm x 7mm/450mm x 350mm x 7mm thick) coloured glazed ceramic tiles, first quality, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) including 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and as directed.
S&F 0.63 mm thick corrugated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL
All as per Item No 13.00 but fixing only old sheets obtained from dismantling including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern
S&F 0.8mm thick plain Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL
Prepainted colored trapezoidal profiled/corrugated Galvalume/ Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL
Prepainted colored plained Galvalume/Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL
S&F in repairs 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type J type hooks or cranked bolts and washer in roof, wall etc complete all as specified and directed.
M&L for 2nd class hard wood clean sawn as in scantling fixed with nails, framed and fixed including dismantling timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and directed.complete all as specified and directed.
Strutural tubular steel as in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. conforming to Fe 410-W (Gde-E- 250) quality-A, including dismantling structural steel work of any description in any position, complete all as specified and as directed by Engineer-in-Charge. Make and Procurement: All as specified in PS clause No 8 of tender documents
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde-E- 250) quality-A, , including dismantling structural steel work of any description in any position, complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new galvanised corrugated sheets incl preparation of new zinc or galvanised surface to receive paint camoflage pattern over a coat of red oxide primer after applying a treatment with modrant solution to remove the galvanisation of CGI sheet complete all as specified and directed.
Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of red oxide or zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Preparation of old decorated surfaces of steel or iron works of any description exc 10 cm over width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge.
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.
Plain Sheet glass 3.00 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane, complete, complete all as specified and as directed.
Figured glass pin headed type, 3.00 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane, complete, complete all as specified and as directed.
M&L for complete removal of existing roof treatment and picking, swiping clean and washing down with wire brushing and cleaning top surface of roof tarracing or cement concrete, including flashings and junction of parapets and complete removing debris and rubbish from site, including roughening the surfaces of old concrete including picking, sweeping, clean, washing down with water to remove dust and brushing neat cement slurry @ 3kg of cement per sqm and laying of APP based polymeric membrane minimum weighing 3.6 Kgs/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified laid over a coat of bituminous primer @0.3 ltr/sqm and finished with applying bitumen grade 85/25 coat @1.2 Kg/sqm. APP membrane shall be laid by torching with 75mm overlap in longitudnal direction and applying two coats of aluminium paint complete all as specified and directed by Engr-in-Charge.
M&L for 20mm thick rendering in cement mortar 1:4 on concrete surfaces including finishing the surfaces even and smooth withou using extra cement mixed with liquid water proofing admixture as per manufacturer's instructions complete all as specified and as directed. Note: Liquid water proofing admixture is deemed to be included in overall rates quoted against this item as per manufacturer's instructions.
M/S BALI CONSTRUCTIONS
R B TRADERS
M/S LEO TRADERS
Rampal Singh Contractor
Mehar Enterprises
M/S SHAMSHER ALI SUFI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .