Assam

Active

Works

Civil Works

Construction of Watch Tower and 1st Food Stall at Gaurang River Front at Ward No 9 under Bilasipara Municipal Board

Urban Development Department

Bilasipara, Dhubri (Assam) | Dhubri, Assam

Amount: ₹40.5 LCloses: 1 Oct 20264d left

Timeline

Published14 Sept 2026
Pre-Bid Meeting18 Sept 2026
Closes1 Oct 2026
Bid Opening1 Oct 2026

Tender Value

₹40.5 L

EMD Value

₹80,974

Closing Date

1 Oct 2026, 2:00 pm4d left

Tender Inviting Organisation

Name

Executive Officer, Bilasipara Municipal Board

Address

Office of the Bilasipara Municipal Board

Work Description

Construction of Watch Tower and 1st Food Stall at Gaurang River Front at Ward No 9 under Bilasipara Municipal Board under 15th Finance Commission (2nd instt. of UG) for the year 2022-23 during 2023-24

Tender Information

Tender ID

2026_UDD_53895_1

Reference Number

BMB.307/Pt.V/2026/455

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

150 days

Location

Bilasipara, Dhubri (Assam)

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical

RequiredTechnical Qualification Documents (.pdf)

RequiredBID Downloaded from the portal (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹80,974

EMD Fee Exemption Allowed

Yes

Pre-Bid Meeting

Meeting Place

Bilasipara, Dhubri (Assam)

Important Dates

Last Activity

14 Sept 2026

Published

14 Sept 2026

Bid Opening

1 Oct 2026

Download Starts

14 Sept 2026

Download Ends

1 Oct 2026

Submission Starts

15 Sept 2026

Pre-Bid Meeting

18 Sept 2026

Bill of Quantities

Item WiseBoQ_Ver4.0INR

BoQ1 (32 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Construction of Watch Tower and Fast Food Stall
1.01	20.2 / 20.2.1 - Boring, providing and installation of bored cast-in-situ reinforced cement concrete piles of grade M 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc., by percussion drilling using Direct Mud Circulation (DMC) or Bailer and chisel technique by tripod and mechanical winch machine, all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck mounted rotary/TMR/Tubewell boring machine shall not be used. 450 mm dia piles.	256	m	1,916.4	₹4,90,598.4
1.02	2.8 / 2.8.1 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.	43.74	cum	286.85	₹12,546.82
1.03	16.12 / 16.12.1 - Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.	34.96	sqm	607.2	₹21,227.71
1.04	4.1 / 4.1.10 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).	4.74	cum	6,050.65	₹28,680.08
1.05	5.22 / 5.22.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.	6,291.48	kg	89.65	₹5,64,031.18
1.06	5.22A / 5.22A.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.	6,169.33	kg	89.65	₹5,53,080.43
1.07	5.9 / 5.9.1 - Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete.	62.52	sqm	307.95	₹19,253.03
1.08	5.9.3 - Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform.	141.55	sqm	766.55	₹1,08,505.15
1.09	5.9.4 - Centering and shuttering including strutting, propping etc. and removal of form for shelves (cast in situ).	15	sqm	766.55	₹11,498.25

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.30 MB

Work Item Documents

BOQ_84665.xls

BOQ • 0.36 MB

BIDWatchTower.pdf

Tender Documents • 5.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Construction of Watch Tower and Fast Food Stall
1.01	20.2 / 20.2.1 - Boring, providing and installation of bored cast-in-situ reinforced cement concrete piles of grade M 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc., by percussion drilling using Direct Mud Circulation (DMC) or Bailer and chisel technique by tripod and mechanical winch machine, all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck mounted rotary/TMR/Tubewell boring machine shall not be used. 450 mm dia piles.	256	m	1,916.4	₹4,90,598.4
1.02	2.8 / 2.8.1 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.	43.74	cum	286.85	₹12,546.82
1.03	16.12 / 16.12.1 - Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.	34.96	sqm	607.2	₹21,227.71
1.04	4.1 / 4.1.10 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).	4.74	cum	6,050.65	₹28,680.08
1.05	5.22 / 5.22.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.	6,291.48	kg	89.65	₹5,64,031.18
1.06	5.22A / 5.22A.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.	6,169.33	kg	89.65	₹5,53,080.43
1.07	5.9 / 5.9.1 - Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete.	62.52	sqm	307.95	₹19,253.03
1.08	5.9.3 - Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform.	141.55	sqm	766.55	₹1,08,505.15
1.09	5.9.4 - Centering and shuttering including strutting, propping etc. and removal of form for shelves (cast in situ).	15	sqm	766.55	₹11,498.25

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Construction of Watch Tower and Fast Food Stall

1.01

20.2 / 20.2.1 - Boring, providing and installation of bored cast-in-situ reinforced cement concrete piles of grade M 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc., by percussion drilling using Direct Mud Circulation (DMC) or Bailer and chisel technique by tripod and mechanical winch machine, all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck mounted rotary/TMR/Tubewell boring machine shall not be used. 450 mm dia piles.

256

1,916.4

₹4,90,598.4

1.02

2.8 / 2.8.1 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

43.74

cum

286.85

₹12,546.82

1.03

16.12 / 16.12.1 - Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

34.96

sqm

607.2

₹21,227.71

1.04

4.1 / 4.1.10 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).

4.74

cum

6,050.65

₹28,680.08

1.05

5.22 / 5.22.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

6,291.48

89.65

₹5,64,031.18

1.06

5.22A / 5.22A.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

6,169.33

89.65

₹5,53,080.43

1.07

5.9 / 5.9.1 - Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete.

62.52

sqm

307.95

₹19,253.03

1.08

5.9.3 - Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform.

141.55

sqm

766.55

₹1,08,505.15

1.09

5.9.4 - Centering and shuttering including strutting, propping etc. and removal of form for shelves (cast in situ).

sqm

766.55

₹11,498.25