Civil Work

Amount

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

25 mm dia (heavy type)

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

Single socketed pipes.

Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single tee with door

Single tee without door

75 mm bend

110 mm bend

20 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand) with 450x450 mm chequers etc. all complete as per direction of engineer in charge.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including pplying additional coats wherever required, to achieve even shade and colour.

Old work (One or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

French spirit polishing :

One or more coats on old work.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :

With cement mortar 1:4 (1cement: 4 coarse sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of thickness 3.70 mm.

Refixing old glass panes with putty and nails .

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

15mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour.

15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT grating of approved quality and colour.

Circular type.

100 mm nominal dia.

Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.

Providing carpenter as and when required for attending complaints of carpentry works such as repair of doors , windows , cupboard shutters, false ceiling, dismantling of wooden partitions, iron with pvc sheet partitions etc. as per requriment on need basis for all jobs in one working day i/c cost of screws ,nails, fevicol clamps etc. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid in separate items except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.) All dismantled unserviceable as well as serviceable materials stacks at site in proper way within 50 Metre leads as per direction of engineer in charge.

Providing services of Fitter/Plumber for plumbing, sanitary installations, water supply fittings and related works complete in a working day i/c cost of all T&P as per requriment on need basis for all jobs in one working day i/c cost of screws ,nails, fevicol clamps etc. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid in separate items except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.) All dismantled unserviceable as well as serviceable materials stacks at site in proper way within 50 Metre leads as per direction of engineer in charge..

Providing services of Beldar /Helper for need basis for carpenter / plumber as and when required etc. all complete as per direction of engineer-in-charge including the cost of ledder, tagari, phawra etc.for all jobs in one working day and dumping/ stacking all unused/ unserviceable materials within 50 M lead in the Campus as per direction of Engeer-In-Charge.

Cleaning and washing complete toilet portion including glazed tiles on walls.floors, sanitary pots such as W.C. with cistern, wash basin , urinals pots, wash basin granite counter, nahni traps etc. with Harpic, surf and brush at FF and SF portion in T.E.building Shastri Nagar i/c disposal of all rubbish out side the Muncipal area etc. all complete as per direction of engineer in charge.

Repairing to non-operational steel glazed windows upto three storey height including removal of existing glass panes safely if required, welding of section & box hinhes if required at site and refixing the same glass at same place after repairing of windows etc.all complete.The all works will be carried out as per actual site requirement & as per the instructions of Engineer-in-Charge. (Note:- The fixing of glass panes after cleaning with silicon and putty shall be paid in separate items. If the hinges are replaced with box hinges, the same will be paid in separate item.)( Note:-If glass breaks while removing glass from steel window then its cost will be recovered from the agency.)

Cleaning and washing with water of whole TDM Building (SF Portion) inside portions including staircase from GF to terrace , whole terrace of building, floors, walls, terrace, mumty terrace, steel windows, doors, PVC doors and partitions, projected chhajas and disposal of all garbage, building rubbish, unservieable waste papers sprading on floors, existing building rubbish including disposal of all rubbish materials outside the municipal area of Pali etc. all complete as per direction of engineer-in-charge.

Fixing of collapsible gate of size 1.70x2.53 m after demolition from one place to another on the same floor, all works including welding, installation of new holdfast if required etc. all completed as per the instructions of Engineer-in-Charge.

Supplying of MS box type hinges with stainless steel screws etc. complete :

Providing and fixing C.P. brass pillar cock for basin basin of approved quality & manufacturer as per direction of Engineer- In -Charge:

15mm nominal bore (Weight should not be less than 650 gram)

CREDIT of materials / items obtained from dismanteling being unserviceable.

Brass bib cock / stop cock./ball cock

15 mm nominal size.

Brass spindle of Pillar cock-15 mm nominal bore.

Brass wheel or handle valve.

G.I. pipe.

C.P. Brass Pillar / mixer tap 15 mm.

P.V.C. Cistern up to 10.00 Litre capacity.

M.S.flushing Cistern up to 10.00 Litre capacity.

Unservicable/Broken SCI/CI Rain water,Sanitary pipes and fittings of 75 mm to 100 mm diameter

Unserviceable and dismantled MS section such as tees, angle,flat,steel bar, pressed steel chowkhat etc.

Unserviceable hydraulic door closer etc.c.

MEENA & CHOUDHARY (BID ID -807001)