General Fund 2025-2026 Construction of Compound wall (South Side) and Gym (Flooring) at Dhil Nagar Park in Thiruvidaimarudur Town Panchayat.

Amount

Bored pile 300 mm dia boring, providing and installing bored cast in situ reinforced cement concrete pile of specified dia meter and length below the pile cap in cement concrete 1:1.5:3 (One Part Cement, One and Half Part M Sand, Three Parts of Agreegate) to carry a safe working load then specified, excluding the cost of steel reinforcement but including pentonite solution machinery charges, labour charges etc., all complete, (Length of pile for payment shall be measured from bottom pile to the bottom of pile cap) 300 mm dia piles (Details of cost for 20 M length of pile material)

Earth work excavation for foundation, etc., in all soil sand sub- soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, shuttering, bailing out water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 15 cm thick well rammed and depositing the surplus earth with in the compound in place shown by the departmental officers within an initial lead and lift and clearing and levelling the site etc.,complete

Supplying and filling in foundation and basement with good M Sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specfication.

Cement Conceret 1:4:8 (One Cement four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering and wherever necessary laying in layers of 15cm thick and consolidated and curing complying with standard specification and as directed by the departmental officers etc., complete

Supplying & Erecting of steel centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

Retaining Wall,Deckslab and Drain sidewallup to 1.00 M

Rate for rectangle column post and sunshade

Brick Work in Cement Mortar 1:5 Mix (one cement, five sand) using new best II Class Bricks of size ( 9” x 4 3/8” x 23/4 “ )from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Upto basement

above basement

RCC 1:1½:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering , Centering and cost of Reinforcement grills but including curing ,finishing etc complete with standard specification and as directed by departmental officers etc complete as per standard specification.

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.-

Providing and laying WMM (Wet Mix Mecadam) of 250 mm compacted thickness in two layors of 125 mm thick or else as specified on the prepared sub base with graded stone aggregate and granular material of quality size and grading pasting in layor with motor grader and compaction with vibrating rollers of 80-100 KN static weight and fine dressing for required grade and cross slope as shown on the drawing equipments equipments safety measures testing and incidents necessary to complete the work as per MORT&H406

Providing and laying of Rubberized Paver block 63 mm thick High Strength type of interlocking pavement block in required size of minimum comperesive strength of 40 N/mm2 in Uniform Shape at approved make to be laid in curring bone pattern with approved non sticking surface in top and the rate including leveling the base preparation of subbase with the ston dust 100 mm thick laying out the cut pieces to fit the edge vibrating the paver sweeping transporting loading , un loading and laying the Paver block etc Completed. as per Standard Specification.

Dadooing walls with colour Designed glazed tiles of suitable sizes 150mm x 150mm x 6mm of approved quality and colour set in cement mortar 1:2 (one cement two sand); 10mm and pointing with colour cement neatly etc., complete including cost and conveyance of all materials labour charges etc complete. as per standard specifications.

Paving the flooring withCeramic tiles of size 300mm x 300mm x 6mm of approved colour and quality laid in cement mortar 1:3 (one cement and three sand ) 20mm thick in all floors and the top pointed with the colour cement etc., complete.

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying and fixing of RoofTruss using M.S. angle frames and M.S Plates including cost of I section, angles and flats in proper position including labour charges for cutting, welding, and including labour charges for priming cost of red oxide painting and erection in a proper position etc. complete as per standard specification.

Plastering with cement mortar 1:5 ( one cement five sand ) 20mm thick in all floors including cost and conveyance of all materials labour charges etc., complete complying with standard specifications (S.I.306)

Painting the New plastered wall surface with two coats of cement paint of approved quality and colour over one coat of cement primer including cleaning the surface etc complete as per standard specification.

Supply and fixing of Galvalum sheet roofing 0.6mm thick of approved quality by drilling holes ( and not by punching) with necessar y " j"/ "U" bolts and nuts of 8mm dia of suitable length and providing 1 set of Bitumen washer of 25mm dia and 1.60mm thick for each bolt including protecting portion of bolts in roof shall be covered with bitumen compound etc completed complying with standard specification as per TNBP No. 49

Supplying and fixing in position of Indian make White glazed earthen ware Flat Back Urinal of approved quality including dismantling masonry if necessary and redoing the same to original condition etc., complete as directed by the departmental officers.

Supplying and fixing in position of Indian make White glazed earthen ware Squatting Urinal of approved quality including dismantling masonry if necessary and redoing the same to original condition etc. and as directed by the departmental officers etc complete as per standard specification.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supply and fixing of precast RCC Ring 1200mm dia loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Supplying and fixing of ISI approved make UPVC pips and Specials including cost and conveyance of all materials labour charges etc complete As per std specification.

25mm pipe

32mm pipe

25mm Elbow

25mm coupling

25mm Tee

32mm Elbow

32mm coupling

32mm Tee

20mm CP Tap

SIVAKUMAR V (BID ID -1440968)