Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.8 L+₹36,505.75 (1.49%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹26.3 L+₹1.9 L (7.60%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹28.9 L+₹4.5 L (18.4%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹29.7 L+₹5.2 L (21.4%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS AMRITSAR
CERTAIN REPAIR TO MES INSTALLATION UNDER AGE B/R-II AT NAMS
2023_MES_598061_1
GE NAMS-41/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
CLASS D CATEGORY a(i)
8 documents required · 8 mandatory
₹500
GE NAMS
₹70,000
Yes
10 Jul 2023
24 May 2023
28 Jun 2023
24 May 2023
21 Jun 2023
8 Jun 2023
Amount
Dismantling old posts or struts ( wood, steel or RCC) any section embeded below ground level with cement concrete, including taking out embedded portion comple all as specified and directed
Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type B2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Dismantling of chain link fencing, wire mesh of any type, and in any position by unscrewing nuts, fillets, clamps or cutting of rivets, and welded portion complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. Note: supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.
Supply only Chain link MS galvanised fencing any size and shape (Approved by GE/EIC) including line wires, any mesh, size and type to any of standards , rails , staining bolts, etc including provision of bindings wire complete all as specified and directed.
S&F in repair, galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins incl dismantling of old existing barbed wire in any position complete all as specified and directed. (Note: Each line wire shall be measured for payment)
S&F, mild steel posts and struts in fencing cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mess etc.) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.
Description all as per above item no. 8.00 here-in –before but except mild steel
Supply only mild steel flat iron, round bars etc. in available length complete conforming to Fe-290 (Gde E-165) complete all as specified and directed. Note:- 10mm dia MS rods 3 Nos shall be provided horizontally by interwewaving in the chain link and welded with MS flat iron.
S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5cm but n exc 10cm long complete all as specified and directed.
Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed
Description all as per srl item no 13.00 above but except bricks
Taking down cement plaster on brick walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance exc. 500 mtrs but n.exc 1.5 Km where directed complete all as specified.
M&L cement plaster 15mm thick in CM 1:4 on Brick wall etc finished even and fair without using extra cement on External Wall all as specified.
M&L cement plaster 15mm thick in CM 1:6 on Brick wall etc finished even and smooth without using extra cement (Internal wall) all as specified.
M&L cement plaster 10mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement all as specified.
M&L prepartion of new plastered surfaces of walls and applying two coat of Cement Based Paint over one coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls, pillars cornices etc and applying two coat of Oil Bound Distemper over a one coat of primer complete all as specified and directed.
M & L three coat of white wash incl preparation of new plaster surface of ceiling complete all as specified and directed.
M&L prepartion of Old plastered surfaces of walls and applying one coat of Cement Based Paint complete all as specified and directed.
M&L for preparation of Old plastered surfaces of walls, pillars cornices etc and applying one coat of Oil Bound Distemper complete all as specified and directed.
M & L one coat of white wash incl preparation of Old plaster surface of ceiling complete all as specified and directed.
S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed.
Description all as per srl item 25.00 here in before but except paver block shall be reused after necessary cleaning and making good all as specified.
M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and removing rubbish off the primises etc complete all as specified and directed.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance outside of cantt premises to low lying areas complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor.
M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in floor Finishing fair and even.
M&L for 50mm thick PCC 1:3:6 type B-1 (using 20mm graded stone aggregate as in plinth , path/ floor fair and even.
Dismantling framed work timber scantling in fillets, rails, post, rafter, purlins etc under40 sqcm in section
Dismantling Asbestos cement (corrugated or semi corrugated) sheeting in roof coverig complete all as specified
S&F mild steel Gde Fe-410-W Gde E-250 quality A as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of old steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.
M&L for 35 mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed.
M&L, in repair for precast RCC boundary pillar in 1:2:4 type B0 (using 12.5mm graded aggregate) decorative type for RCC jalli incl fixing in conc /brickwork etc incl dismantling existing pillar complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe 410-W(Gde E- 250) qualityA including dismantling of old iron gate or other section complete all as specified and directed.
Dismantling wrought iron and mild steel work of any description complete all as specified
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar
M&L Granite (of any type) work (table rubbed and polished) 16 to 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:3.
M&L for machine cut kota stone slab, 20-25mm thick as in flooring over and including screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.
M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including removing grass /plant and repair with cement concrete/cement mortar after complete removal of existing root of plant
M&L for 15 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. Note : 3% water compound proofing measure and paid separately .
Supply only integral water proofing compound.
M&L for 25 mm thick cement concrete (1:2:4), type B1 using 20mm graded stone aggregate over roof in padding & finishing the surface even & fair without using extra cement all as specified & directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed
S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed.
Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.
M & L for PCC (1:2:4) type B-0 (12.5 mm graded stone aggregates) as in roof kerbs, sloping in roof slab or mud stops, rounded or chamfered on edges
M&l Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified.
S&F glazed ceramic coloured tiles thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. 300X450mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
S&F glazed ceramic coloured tiles thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. 300X200mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), of size 400x400mm in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.
S&F Steel rolling shutters of laths thickness 1mm , without ball bearing , as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete ; push pull or manual type incliding making good to dismantelled portions
Fixing in repairs Steel rolling shutters of any thickness , without ball bearing , as specified including top cover , anchoring rod, hasp and staple ;erected in position as indicated and to make proper in operation complete ; push pull or manual type incliding making good to dismantelled portios (note-ball bearing and safety lever locks will be paid separately.
S&F ball bearing for rolling shutter as per existing size
S&F Safety lever locks mild steel with 4 levers for rolling shutters
Taking down chowkats or frames with shutter's (without taking off shutter's from frame) n ex 1.50 sqm each all as specified and directed.
Taking down chowkats or frames with shtter's (without taking off shutter's from frame) exc 1.50 sqm and n.exc 4.00 sqm each all as specified and directed.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed
Taking down aluminium door/window shutter of any sizes including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.
Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. as per Drg No CE JZ/TD-1020/08 Sh 1/3 to 3/3 (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 12 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) One coat of Red oxide primer and two coat of synthetic enamel paint to MS window and guard bar. Note : Including taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. wire mesh and glass to be measured and paid separately.
S&F MS box type ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ TD- 1017/08 Sh 1/3 to 3/3 with guard bar Including taking down old steel ventilator and making good dismantled portion with PCC 1:2:4 type B0 around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. glass to be measured and paid separately. complete all as specified and directed
S&F Aluminium anodised powder coating any colour minimum coating 50 micron door/ windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame of fixiing with handles, tower bolts, rubber gasket and maruti lock , complete all as specified and directedetc complete Note :- Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately.
M&L for anodised aluminium powder coated door shutters, aluminium section weighting 0.55kg/m , incl necessary ,5 mm thick, black tinted glass panes with nano coating & glazing or PVC sheet joining with cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, handles, lock , 2 x aluminium handles 150mm, 3 x hinges , 2 x Aluminium tower bolts 150mm with each shutter of any type complete all as specified all as specified.
S & F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary ,5 mm thick, black tinted glass panes with nano coating & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc complete all as specified all as specified
S & F in repair Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as specified and directed by Engr-in-charge.
S&Fin repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main bodywith stainless steel cover,governing pivot made of brass, other parts made of mild steelheavy duty and fixed
S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed
S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.
S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.
S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specificationn make Rajshree.
S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S & F 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturer's instruction complete all as specified all as specified.
S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed Note uptoheight 5.50 m including all scaffolding work
S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed Note uptoheight 5.50 m including all scaffolding work
Hacking out old broken glass (any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones at any height including required scaffolding work
S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails complete all as specified and directed Note uptoheight 5.50 m including all scaffolding work
Description all as per Srl item No 82.00 above but figured glass pin head type & glazing with oil putty Note uptoheight 5.50 m including all scaffolding work
S&F, floor doouble door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.
S&Fin rep mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.
S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.
Supply and fix in repair 2 lever mortice lock vertical type 100mm made of Aluminium complete all as specified
M&L in repair for Block Boards, 18/19 mm thick, , exterior grade, decorative type with decorative face veneered on both sides fixed with screws to timber frame work
S&F 100 mm long Hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of Pink primer.
Material and labour for preparation of old wooden surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.
S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.
Refixing 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc)all as specified and directed.
Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.
Refixing 20mm dia steel tubing and connection in new or old position all as specified and directed.
S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe
S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.
S/F in repair 20mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.
S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.
S&F in repair 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.
Supply and fix in repair CP flushing jet including pipe for Europian type closet of suitable length with brass check nut complete all specified and directed
S and F in reoair Aluminium anodised tubular towel rail D type 60cm long between flanges including bracket complete all as specified
Supply and fix in repair of dia 32/40mm waste coupling of PTMT half or full thread minimum weight 32mm - 45gms/40mm-60gms
Supply and fix in repair waste pipe of suitable size for kitchen sink/wash hand basin/urinal pot as directed by Engineer in Charge
S&F PVC connection 15mm size with PTMT nuts of length 450mm.
Supply and fix in repair shelf of PTMT fixed with and including chromium plated brass scrws and wooden/plastic cleats minimum weight 300gms
Supply and fix in repair float valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight - 210gms
M&L 75mm bore PVC (SWR) floor trap ,plain with grating including jointing with solvent cement
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.
S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest , including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.
S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.
S& F, in repair vitreous china urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as specified and directed by Engr-in-charge.
S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as specified and directed by Engr-in-charge.
Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.
M&L for Demolition of reinforced cement concrete of cover slab/cooking platfrom and RCC roof tank etc complete all as specified and directed.
M&L for precast reinforced Cement concrete in cover slab for manhole , drain and connected works type B- 1 (using 20mm graded stone aggregates) including demolitition complete all as specified and directed.
S&F mild steel TMT bars 10mm dia.and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed
Santokh Singh and Associates
M/s Vijay Construction Co.
Mahajan Builder
tarlok singh contractor
Chander Mohan Arora Contractor
tarvinder singh
Saini Constructions
S S CONSTRUCTION COMPANY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .