Matana NIT 60646 dt. 14.07.2020

Amount

N.S. Item

Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. A) Raw water pump set Raw Water Pump set 1400 LPM 12 Mtrs Head

B) Clear Water pump set Clear Water Pump set 1400 LPM 40 Mtrs Head

Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials laying jointing, refilling of including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets at water works in position as per specification given in schedule No.II. For Pumping Machinery A) Detail of pipe and specials CI, D/F pipes 150 mm i/d

Bell Mouth 150mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories :- 1. Incomer Switch 100 Amp 2. Aluminum bus bar chamber of 100 Amp. Capacity 3. Volt Meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp - One Set

(A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm having following items. (A) For Raw Water Pump set 1400 LPM 12 Mtrs Head 2 Nos. a) Main switch as required 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make F) SPP 2 No. of approved make g) Motor starter, Star delta 2 No.for 1400 LPM 12 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as required = 1 No.

(B) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items. (B) For Clear Water Pump set 1400 LPM 40 Mtrs Head 2 Nos. a) Main switch as per required capacity 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make g) Motor starter, Star delta 2 No.for 1400 LPM 40 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as per required capacity = 1 No.

Supplying erection, testing of ISI marked copper wire for 4 Nos. motors with under ground system in PVC and flexible pipes copper wire size 10 sq. mm complete in all respects with accessories like thimble etc. complete in respects.

Supplying erection, testing of ISI marked copper wire for 4 Nos. motors with under ground system in PVC and flexible pipes copper wire size 16 sq. mm complete in all respects with accessories like thimble etc. complete in respects.

Supply erection testing of light fittings including wire in the pump chamber with materail upto 10 points including switch button plug PVC conduit pipe & copper wire etc.as per approved specifications complete in respect.

Providing & fixing Exhaust fan 18" i/d (450 mm) complete with suitable GI sheet of apporved make complete in respect.

Providing & fixing of Ceiling fan 1400 mm (56") with speed adjuster of reputed make (Make Cormption, Usha, Bajaj, Orient) complete in respect.

Providing & fixing suitable floating arms along with swevel bend as per reuired specifications approved by Engineer-in-charge (250 mm)

Supply erection testing of reputed make LED light 100 watts with fittings and accessories complete in respect.

Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per schedule IV for a period of 5 years after 12 months during defect liability period 3 months trial run (Will be charged to the A/Mtc. estimate. Operation and Maintenance of during defect liability (Operation Only)

Operation and Maintenance of during the 1st year defect liability period

Operation and Maintenance of during the 2nd year

Operation and Maintenance of during the 3rd year

Operation and Maintenance of during the 4th year

Operation and Maintenance of during the 5th year

Bidder Name

Amount

ONKAR SINGH

NAFE SINGH CONTRACTOR

NAFE SINGH CONTRACTOR

ONKAR SINGH