Salem District (Thalaivasal Block) Construction of Panchayat office Building at Unathur H/O Unathur.Work No.19/2025-2026.AGAMT-II 2025-2026

Amount

1.) Construction of Panchayat office Building at Unathur H/O Unathur

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supplying and Filling foundation and basement with filling Msand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Collection and supply of 40mm metal and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Collection and supply of 20mm metal and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed for foundation

Brickwork in CM 1:5 mix using country bicks including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete.

Supply & Fabrication of steel including all cost and conveyance of all materials to site and all labour charges for etc., complete.

Supplying & Erecting centering for sides & soffiots including necessary supports for all Rcc works etc.complete

Centering Sides

Reinforced Cement Concrete 1:1.5:3 mix using 20 mm metal for all items including cost & conveyance and labour charges etc complete.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Paving the floor with Antiskid tiles of Size 305 x 305 x 6 mm size laid in CM 1:2, 10mm thick and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. (The ceramic tiles should be got approved from the Departmental officers before execution).

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution.

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dsesign & finished thick. beating the concrete with wooden beaters of approved pattern, keeping the surface contantly wetted with sprinking lime & jaggery water as per standard specifications etc., complete as directed by the departmental officers. Rate for 10m3

Finishing the top of roof with one course of machine pressed tiles of size 23 x 23 x 2cm (100% new tiles ) of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc., complete complying with standard specifications. Rate for 10m2

Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISS HBG metal and the top rubed smooth etc., complete complying with standard specification as directed. Rate for 10 m2

Supplying and applying of.two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The 'Surface shall then be” allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire su.rface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and th”en sand papering (waterproofabrasive sheet) the same after it is dry and finishing the surface. smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Basedon SoR 2024-25}

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.

Distempering in two coats using oil bound distemper including cost and conveyance of all materials to site and all labour charges etc complete.

Painting in two coats using exterior emulsion paint including cost and conveyance of all materials to site and all labour charges etc complete.

Painting two coats with approved quality Enamel paint over New iron work including cost & Conveyance and all labour charges etc complete.

Supply of Steel door of size 1.10m x 2.10m with standard specification including all charges etc complete.

Supply of Steel door of size 1.00m x 1.80m with standard specification including all charges etc complete.

Supply of Steel door of size 0.75m x 2.10m with standard specification including all charges etc complete.

Supply of Steel window of size 1.20m x 1.30m with standard specification including all charges etc complete.

Supply of Steel window of size 1.50m x 1.30m with standard specification including all charges etc complete.

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and sectionusing 18 GI sheet. The shutter shall be painted withone coat of red oxide primer and the rate is inclusive ofhood covers, transportation charges etc.,complete.( Manually Operated) M-0401

Supply of fixing Grill Gate of size 1.20m x 2.10m with standard specification including all charges etc complete.

Supply of fixing Rcc Jolly of size 0.60m x 0.45m with standard specification including all charges etc complete.

Supply and Fixing of Indian Water Closet with P Trap best quality and approved including all Cost etc complete.

Supply and Fixing of European Water Closet with Tank best quality and approved including all Cost etc complete.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair etc complete.

Provision for Labour charges of fixing Doors alongwith frames in position etc., complete (finished work) as per serial no 154 and item no 19

Provision for Labour charges of fixing Windows and Ventilators alongwith frames in position etc., complete (finished work) as per serial no 155 and item no 20

Supply and fixing of Cudapah slab of 20/30mm thick including cost and conveyance and all charges etc complete.

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete

Wiring with 2x1.5 Sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5a F.T switch with continuous earth wire connection of 14 SWG TC Wire of making good of the concealed portion with suitable colour for PVC Concealed light point / Fan point (for electronic regulator) SD.18

Wiring with 2x1.5 Sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories in flush with wall with 150mmx100mmx113mm TW Switch box with 3 mm thick Hylem Sheet cover for 5 A 3 pin non inter locking CS plug with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD.36

Supply and run of 2 of 4 Sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 v grade on 7/20 GI Bearer wire for Service connection mains (SD.65)

Supply and run of 2 of 4 Sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 v grade in 25mm dia GI Pipe (Class'B') Suitably bent at both ends with necessary angle iron upright and end supports for maints (SD.70)

Supply and fixing of WT Bulk Head Fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60W Bulb (SD.84)

Supply and fixing of TNEB meter Board suitable for 32A Three phase service connection with 32 A Fuse unit (500V) 32 A neutral link and earth ling (1"x1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EBV Meter to fues unit (SD.127)

Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 88 ]

Supply and fixing of fancy glass shade and 11W CFL for BH point (SD.80)

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 106

Provision for Water Supply and Sanitary arrangements - PVC Tank 1000 Lit

25mm PVC Pipe

63mm PVC 4 Ksc Pipe

15mm CI Tap

25mm PVC Bend

25mm PVC Tee

110mm PVC Pipe - 4 Ksc

110mm PVC Bend - 4 Ksc

110mm PVC Tee - 4 Ksc

63mm PVC Tee

63mm PVC Bend

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

KALESWARI (BID ID -1305079)