The work of underground cabling and erection of street light poles from Odxel junction to Our Lady of Lourdes Chapel at Odxel under jurisdiction of section office Taleigao sub division IV Taleigao.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain( not exceeding 1.5 mt in width or 10 sq.m on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposl of surplus excavated soil as directed within a lead of 50 m(a) for laying of HT/ LT cables of various sizes including excavation for equipment foundation i.e for 1) RMU 2) TRANSFORMERS 3)LV SWITCHBOARD 4) DISTRIBUTION FEEDER PILLAR 5) SERVICE PILLAR 6) STREETLIGHT PILLAR 7) STREET LIGHT POLES ETC. (825*0.9*0.45)

Refilling the foundations, trenches, plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth, cosolidating each layer by ramming and watering lead upto. 50 M and all lifts and disposal of surplus earth in cable trenches and foundations of poles and equipments.(825*0.7*0.45)

Disposal of surplus excavated soil / material by mechanical transportation including loading and unloading, stacking/levelling as directed within a distance of 2500mts (825*0.2*0.45)

Supply of fine river sand of approved quality (except in sandy soil) for cushioning of HT/LT underground cables laid by conventional Open Trenching Method. (825*0.2*0.45)

Supply of Underground cable protective cover as per specs. The concrete slab shall be machine made using semi dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-press" machine with a high vibration frequency and hydraulic presuure of 40 MT, the size of the slab shall be 480mm*250mm*50mm and the concrete grade shall be M30 Adhring to IS 456l:2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strength) when tested.

Supply of 4 core, 16sq.mm, multistand Aluminium conductor, PVC insulated 1.1KV grade' Unarmoured power cable and carrying ISI MARK

Supply of 1.1KV, 3½ core, 120sq.mm, stranded Aluminium conductor, XLPE insulated, armoured power Cable and carrying ISI MARK (from the Feeder Pillar to Service Pillar)

Supply of mini fuse type pillar with 400 Amps fuse base with HRC fuse link of 250 Amps for incoming- 2 Nos and 125 Amps fuse base with HRC fuse link of 80 Amps for outgoing- 6 Nos.

Supply of HDGI 8.0mts long Octagonal tapered poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make Bajaj Electricals Ltd, Transrail, Hakke Industries Pvt. Ltd and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO. b. Base Plate steel of size 225x225 m, thichness 16mm confirming to IS226/IS2062. c. 1.5mts long single brackets HDGI, 3,25mm thick for mounting the fixture of outer diameter 40mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65 for cable entry and exit (2runs). e. Door opening of approx length 500mm at a elevation of 500mm from the base plate.

Supply of set of 4 nos J type M20 (UNF Thread- 100m) foundation bolts of grade EN 8 & ISI1367 of suitable length for 8mtr pole.

Supply of LED lights (50W) (28 Nos)

Removal of 7.5 M RCC poles

Supply of Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN MCCB,TPN MCBs, TP contactors, Electronic/ Digital/ Mechanical Timer, Connectors etc complete.

Erection, Testing & Commissioning

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain( not exceeding 1.5 mt in width or 10 sq.m on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m(a) for laying of HT/ LT cables of various sizes including excavation for equipment foundation i.e. for 1) RMU 2) TRANSFORMERS 3)LV SWITCHBOARD 4) DISTRIBUTION FEEDER PILLAR 5) SERVICE PILLAR 6) STREETLIGHT PILLAR 7) STREET LIGHT POLES ETC. (825*0.9*0.45)

Refilling the foundations, trenches, plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth, consolidating each layer by ramming and watering lead upto. 50 M and all lifts and disposal of surplus earth in cable trenches and foundations of poles and equipment's.(825*0.7*0.45)

Disposal of surplus excavated soil / material by mechanical transportation including loading and unloading, stacking/levelling as directed within a distance of 2500mts (825*0.2*0.45)

Laying of fine river sand of approved quality (except in sandy soil) for cushioning of HT/LT underground cables laid by conventional Open Trenching Method. (825*0.2*0.45)

Laying of Underground cable protective cover as per specs. The concrete slab shall be machine made using semi dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-press" machine with a high vibration frequency and hydraulic presuure of 40 MT, the size of the slab shall be 480mm*250mm*50mm and the concrete grade shall be M30 Adhring to IS 456l:2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strength) when tested.

Erection, Testing & Commissioning of 4 core, 16sq.mm, multistand Aluminium conductor, PVC insulated 1.1KV grade' Unarmoured power cable and carrying ISI MARK

Erection, Testing & Commissioning of 1.1KV, 3½ core, 120sq.mm, stranded Aluminium conductor, XLPE insulated, armoured power Cable and carrying ISI MARK (from the Feeder Pillar to Service Pillar)

Erection, Testing & Commissioning of mini fuse type pillar with 400 Amps fuse base with HRC fuse link of 250 Amps for incoming- 2 Nos and 125 Amps fuse base with HRC fuse link of 80 Amps for outgoing- 6 Nos.

Erection, Testing & Commissioning of HDGI 8.0mts long Octagonal tapered poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make Bajaj Electricals Ltd, Transrail, Hakke Industries Pvt. Ltd and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO. b. Base Plate steel of size 225x225 m, thichness 16mm confirming to IS226/IS2062. c. 1.5mts long single brackets HDGI, 3,25mm thick for mounting the fixture of outer diameter 40mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65 for cable entry and exit (2runs). e. Door opening of approx length 500mm at a elevation of 500mm from the base plate.

Erection of set of 4 nos J type M20 (UNF Thread- 100m) foundation bolts of grade EN 8 & ISI1367 of suitable length for 8mtr pole.

Erection, Testing & Commissioning of LED lights (50W) (28 Nos)

Removal of 7.5 M RCC poles

Erection, Testing & Commissioning of Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN MCCB,TPN MCBs, TP contactors, Electronic/ Digital/ Mechanical Timer, Connectors etc complete.