Tender for Proposed Structural, Civil and Interiors including Electrification, Fire Fighting, HVAC of the Existing Temple and Pratikshalaya Structure

Enabling works -- Removing existing stone/marble cladding without damaging the column & other vertical surface including propping the adjacent RCC members if necessary including stacking the materials & carting away the debris outside premises as directed etc. complete. (The rate to include scaffolding for the internal areas except for the ground floor)

Removing carefully causing the least possible damage, existing floor tiles, stones, marbles including bedding material of any thickness till naked slab etc. complete and stacking the same/carting away the same outside the premises. The marble tiles should be carefully removed using long sharp chisel to ensure any breakage / damage to the marble. The intact / good condition marble should be stacked separately to have decision from the consultant / trust for resuing etc. complete.

Removing carefully existing plaster of any thickness from walls, ceilings, columns, beams including stacking the same as directed and carting away the same outside the premises including double scaffolding, erecting horizontal platforms at working levels to collect the debris etc. complete. (The rate to include scaffolding for the internal areas except for ground floor)

Removing carefully existing Gypsum / Metal Grid / PVC false ceiling, including necessary frame work and scaffolding, lowering and stacking the same in compound as directed etc. complete.

Removing carefully existing Wooden false ceiling, including necessary frame work and scaffolding, lowering and stacking the same in compound as directed etc. complete.

Dismantling existing brick masonry wall including plastering and other finishes in workman like manner and carting away the debris outside premises including necessary scaffolding, covering the machines as directed by engg.-in.charge etc. complete.

Removing existing doors and windows including frames, shutters causing least possible damage and handing over to the client including scaffolding etc. complete.

Removing existing partitions gypsum / wooden panelling including glass work without any damage and handover to client. The item to include, carpentry, shifting at the desired space given by trustee etc. complete.

Removing the existing waterproofing layers of any thickness from terrace, bathrooms carefully including tiles, china chip, brick bat coba, I.P.S., tarfelting if any including vattas etc. complete, lowering down and stacking the debris in compound as directed and carting away the debris out side the premises etc. complete.

Removing the existing IPS layer including vattas from chajja top by means of chisel and hammer (ensure no damage to the chajja) including cleaning, necessary double scaffolding, stacking the debris as directed and carting away the same out side the premises etc. complete.

Removing existing FRP brackets provided for the cladding/ moulding including fittings etc. complete.

Removing existing GI/UPVC plumbing / santitary lines of any diameter including fittings etc. complete.

Dismantling existing spiral steel stair including necessary fittings and other finishes in workman like manner and carting away the debris outside premises including necessary scaffolding, covering the machines as directed by engg.-in.charge etc. complete.

Providing and fixing zinc alloy based galvanic disk type/ Caplets sacrificial anodes to the reinforcement. The anode shall be connected to the reinforcement steel by connectors provided with the anode including drilling, sealing the hole with epoxy. Application & execution shall be done as per the manufacturer’s instruction, complete as directed by the Engineer in charge

Exposing existing RCC columns, beams, slabs, chajjas, R.C.C. fins, lintels, pardis etc. including plaster upto 6mm beyond main reinforcement carefully by means of chisel and hammer or mechanically including necessary double scaffolding, erecting horizontal platforms at working levels to collect the debris, proping with top and bottom runners as directed stacking the debris in the compound as directed and carting away the same outside the premises etc. complete

Removing existing corrosion manually/ mechanically in M.S./Tor bars by means of suitable light taping, wire brushing mechanical grinder, washing and drying exposed surfaces, providing and applying 2 coats of approved rust passivator to exposed bar, scrapping reinforcing bars again and applying specified coats, as per manufacturer specifications including scaffolding etc. tying and fixing misplaced reinft. at required position by U clips, binding wires etc. complete (Measurement shall be given for exposed area of concrete).

Repairing of damaged RCC members like columns, slabs, chajjas, fins, lintels, pardis, beams by "Polyalk EP" mortar including applying bonding coat of "Polyalk EP" in required proportion (as per manufacturer's recommendations) in layers. The rates shall be inclusive of necessary scaffolding, mixing polymer mortar in mixers, compacting mortars by hand held vibrators, curing etc. complete. (Use Polyalk EP: Cement :Quartz Sand in 1:5:15 proportion). (a) For Built up thickness of 15mm (incl.+5mm)

Repairing of damaged RCC members like columns, slabs, chajjas, fins, lintels, pardis, beams by "Polyalk EP" mortar including applying bonding coat of "Polyalk EP" in required proportion (as per manufacturer's recommendations) in layers. The rates shall be inclusive of necessary scaffolding, mixing polymer mortar in mixers, compacting mortars by hand held vibrators, curing etc. complete. (Use Polyalk EP: Cement :Quartz Sand in 1:5:15 proportion). (a) For Built up thickness of 30mm (incl.+5mm)

Providing and application of Epoxy Latex Cementitious Mortar System using premixed of part A & B (epoxy) and part B (quartz sand and cement) upto 30mm thick including bond coat prior to application of mortar. The proportion and application should be executed under guidance or as per technical specification provided by the manufacturer, curing, scaffolding etc. complete.

Providing and laying micro concrete of approved brand in proportion 1:1 with metal No.1 including mixing, waterproof shuttering, pouring, consolidating, scaffolding, curing etc. as per mfg.'s specifications . (The items shall be paid on actual consumption of micro concrete) Testing of mircro concrete prior to use is necessary. The cost for the same shall be included in rates of finished items

Injecting cement with sunplex- 100/ intraplast N-200grout into concrete/ brick work by suitable gun/ pump at required pressures by providing necessary scaffolding, drilling and inserting 12mm dia PVC grouting multiperferated nipples upto 30mm to 40mm depth, using `M Seal around the nipple cutting of nipples after curing, cleaning etc. complete. (This item shall be paid on actual consumption of cement used in Kgs.)

Injecting approved epoxy grout into concrete slab, stone masonry cracks, columns etc. by suitable gun/ pump at required pressures by providing necessary scaffolding, drilling and inserting 12mm dia brass grouting multiperferated nipples upto 30mm to 40mm depth, using M Seal around the nipple cutting of nipples after curing, cleaning etc. complete. (This item shall be paid on actual consumption of epoxy used in Kgs.)

Providing and laying in position ready mixed design mix M-25 grade cement concrete for Coping, using cement content as per approved design mix, including the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item. (Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete).

Providing, fabricating and erecting structural steel like plates, channels, angles, girders, insert plates, foundation bolts, expansion bolts anchor fastners etc. of various sizes as per drawings including cleaning, providing and applying 1 coat of polyurethane paint of approved brand externally and applying two coats of red oxide of approved brand internally, scaffolding etc. complete.

Providing and applying internal cement plaster 12mm thick in a single coat using readymade Plaster mix or in C.M.of 1:5 with gujarat sand , plain finish to concrete or brick surface in all positions including applying bonding coat of "hack-aid-plast" at the junction of old plaster and new plaster, and to the existing R.C.C. members like slabs, beams, which are not trowelled raking the joints upto 10mm deep including two legged scaffolding, curing etc. complete.

Providing internal cement plaster 6 mm thick for ceiling in a single coat using readymade Plaster mix or in C.M. 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cemen to approved make and manufacturer and curing etc.complete.(Excluding Tiles) (As directed by Engineer in Charge)

Providing and applying plaster / wall punning with plaster of paris (with plaster of paris material) in10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster)in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and applying sand faced plaster using approved screened sand in all positions including base coat of 15mm thick in CM 1:4 using approved brand of waterproofing compound at 1 Kg / cement bag and curing the same for not less than 3 day and keeping the surface of base coat rough to receive the sand face treatment upto 8mm thick in CM 1:3 finishing the surface by taking out grains and curing for minimum 14 days, double scaffolding, providing and applying bonding coat of hack - aid plast to the RCC members, providing grooves if any etc. complete

Providing and laying waterproofing over flat terraces including cleaning, removing dust, dirt, patches of concrete mortar, brick bats etc. complete in the following manner:- (a) Make neat cement float with non-shrink additives over the slab to fill fine cracks. (b) Lay brick bat in 1:3 cement mortar of an average thickness of 125mm. including providing and adding waterproofing compound as per manufacturer's recommendations, (c) Lay 1:2:3 IPS 38mm thick rough finish including providing and adding waterproofing compound as per manufacturer's recommendations, curing by ponding, including providing and applying hack- aid-plast at the jucntion of old IPS & new IPS etc. complete. (d) Fixing of china chips over the IPS wateroofing

Providing and laying waterproofing in bathrooms including cleaning, removing dust, dirt, patches of concrete mortar, brick bats etc. complete in the following manner:- (a) Make neat cement float with non-shrink additives over the slab to fill fine cracks. (b) Lay brick bat in 1:3 cement mortar of an average thickness of 125mm. including providing and adding waterproofing compound as per manufacturer's recommendations, (c) Lay 1:2:3 IPS 38mm thick rough finish including providing and adding waterproofing compound as per manufacturer's recommendations, curing by ponding, including providing and applying hack- aid-plast at the jucntion of old IPS & new IPS etc. complete.

Providing and applying waterproofing treatment using acrylic polymermodified cement based waterproofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1)by weight covering 9 to 10 Square Metre/Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing and erecting two legged metal tubular scaffolding (cup lock type) of width 1200 to 1500mm largely free standing using H frames of tubular pipes of minimum 40mm diameter, with base plates fixed or adjustable with necessary clamps, coulders, brackets for projections, joint pins, pulleys and other accessories including steel angle or tubular pipe bracings at adequate intervals, access platforms of metal or timber planks of span not exceeding 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work including provision of rubber inserts to pipe ends at point of contact with structure to avoid damage, including access ladders with intermidiate platforms. the scaffolding to be suitably braced and anchored to to the building using support systems created temporarily at the opening in walls using vertical and horizontal adjustable props on the exterior side of the structure at any height above ground level. The rate includes covering of all window openings with 6mm thick plywood, provision of high density plastic sheets covering to protect architectural details on the entire building face a nylon net to prevent all debris falling onto the pavement required and the safety platform at ground level covering the devotess at ground level etc. complete. (The elevational area of the scaffolding shall be measured for payment purpose.The payment will be made once only for execution of all items for such works.

Providing and maintaining Barricading on the site 2.5 m high by using MS Pipes or angle iron frame work of verticals at 3 m c/c and horizontals at 0.90 m c/c, GI corrugated sheets, Struts, MS Clamps, etc. The verticals shall be embedded/ fixed to concrete pedestals below ground. The rate to include fabricating, cutting and fixing in position MS frame work, painting the same with two coats of approved anti rust paint, etc complete. Contractor to get structural design approved by the Engineer. Contractor shall remove and take away the barricading at his own cost on completion of the works.

Scaffolding and Platform for Interior/ Exterior Works :- Providing and fixing temporary steel props to support the structural members including removing the props after treatement etc. complete.

Providing and making working platform at 1st level in structural steel plate supported on steel members to avoid any disturbance / mishap to the daily devotees. Contractor should submit the design of the platform & shall take approval from architect/Trustee prior execution work. Item shall be measured in plan area of the platform constructed & payment shall be made to contractor. Contractor to take away the structural Steel material after completion of works.

Providing and installing Nylon net for safety & protection from accumalated debried generated from dismentaling civil work

Providing and supplying unskilled labours for shifting of materials / miscellaneous works, as per direction of Temple Trust.

Miscellaneous :- Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part-III) by punching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper.

Removing existing Glass shed roof along the pheripery of the temple structure including horizontal frame (except vertical frame) work without disturbance to the structure & devotees. The materials shall be handed over the Temple Trust after removal of roof shed.

Undercounter Cabinet - Kitchen - Providing and Fixing carcass made of 18mm BWP grade plywood: MR Grade of Century/ Green/Archidply/Gattani/Kitply or equivalent finished with 1mm thk. approved laminate: Greenlam/Centurylam/Archidlam/Merinolam or equivalent (Basic rate for external laminate - Rs. 62/sqft ) as approved; Shutters: 18mm HDHMR board finished with 1mm thk. laminate of approved make. Edges finished with 2mm thick PVC Edge banding matching to the laminate. As approved by Architect/ Designer.

Sink Unit - Pantries - Supplying Single bowl stainless steel sink (minimum 16" x 16"), SS 304 grade. As per approved by Architect/ Designer. All warrenty to be submitted by contractor, warrenty to be considered from the date of installation. Make: Nirali

Stove Unit - Built-in gas stove with 4 burners, ISI certified, integrated into countertop. Integrated into stone top with cut-out. As per approved by Architect/ Designer. All warrenty to be submitted by contractor, warrenty to be considered from the date of installation.

Induction Unit - Supply and installation of a single-plate portable induction cooktop (28 x 35cm). As approved by Architect/ Designer. All warrenty to be submitted by contractor, warrenty to be considered from the date of installation.

91mm thick gypsum partition of 1000mm height - Providing, making and fixing 91mm thick gypsum partition 1000mm height. Both side Gypsum partition as per architectural design and instructions. The system shall comprise of following. Frame work- Providing. Making and fixing aluminum frame work made out of 50mm x 38mm aluminum box section @ 600 mm c/c in both ways fix properly as per design and instructions. Gypsum sheet- Providing and fixing 8 mm thick BWP ply fixed on peripheri of the frame up to 1000mm from FFL and finishing ply with 12.5 mm thick gypsum sheet fixed on ply as per drawing or as instructed. Including cutting, necessary hardware, drilling, cut out and necessary support for switch boxes and light fittings and finish, including all necessory scaffolding. All connections in framework shall be with SS screws of approved quality. Completed at all floors and heights as specified and directed by Architects/ EIC. All full height partition vertical support should be fixed to the rcc slab/beam. (Mode of measurement- The elevational area of partition up to ceiling shall be measured for payment.)

Fittings & Fixtures :- Heavy Duty satin finish butt SS Hinges ( 100mm x 75mm x 3mm in size) - 8 nos. SS D type handle - 250mm long - 2 pair Concealed door closer - 2nos. Dead lock - 1No. SS Tower Bolt 300 mm long- 2no. M.S. Plate Hold fast ( 300mm x 30mm x 5mm thick) - 8 nos. for Door frame. Double shutter fully glazed Door - Providing & fixing in position 50mm thick fully glazed double shutter wooden panel Door. Vertical styles & top rail made of 100 x 50mm thick approved quality seasoned T.W.& bottom rail made of 150x50mm thk.approved quality seasoned T.W. finish with approved melamine polish & glass panels of 8mm thick clear float glass of approved make fix with approved T.W 25x12 mouldings. Rate also includes p/f approved T.W. door frame of size 125mm x 50mm. Rate is inclusive of S.S. fixtures like hinges & fittings, such as handles, tower bolts, locking arrangement, concealed type door closure, door stopper of approved make ( ozone,Hettich,Hafle ), necessary hardware complete as per architect's design and instructions by engineer incharge.

Sliding and folding door - Supply & Installation of Dorma operable wall system single track with Dorma series panel or equivalent, standard trim & center tracking. The wall system shall have retractable top & bottom seals (openable). Panel size shall be as per approved shop drawing & have an acoustic rating of 52 STC. Track shall be natural anodized, seals - grey, panel frame powder coated & panel surface fabric with foam backing or ceramic white board or laminate finish as per details . Rate to include all necessary special fittings, applicable taxes, unstuffing, hoisting, installing, protecting, finishing & cleaning, accessories & supports above false/ finished ceiling to hold track, partition above this wall system, partition above false ceiling, glass wool infill in partition above false ceiling etc. complete. Partition above false ceiling shall be made with MS framework 50 x 50 finished with 19mm thk ply on both sides & finished with 12mm thk gyp board on ply (on both sides). Gyp board shall be ready to receive paint.

Fittings & Fixtures :- Heavy duty floor spring with patch fitting - 1no. 26mm dia & 250mm long glass handle 'D' type in ss finish as per approved make - 1 pair SS Patch fittings lock - 1No.

UPVC Fixed Windows - Providing and fixing of factory made UPVC casement window / Fixed Window & Casement Door (White Colour) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5 mm, wherever re

Louvered Windows - Providing and fixing in position aluminum louvered window with anodised aluminum frame of approved make and of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 5 mm thk. frosted glass, necessary hardware, fixtures and fastenings etc. complete as directed by Engineer In Charge.

Staircase - tread & landing - white makrana - Providing & Laying in position 16mm thick machine cut, mirror polished white makrana marble of approved quality, colour & shade for Staircase Treads as per the existing pattern at all floor & levels fixed to the correct line & level over bed of quartz sand and white cement mortar 1:4 including surface preparation, filling & finishing the joints with cement & approved colour pigments, cutting of stone as per required size, making non skid grooves (2nos on each tread of 4mm x 4mm in size), nosing & full round moulding as instructed including diamond mirror polishing, watering, curing finishing & cleaning etc. complete to the satisfaction of the Architect / EIC.

Same using cement-sand mortar 1:4

Staircase - riser - white makrana - Providing & Laying in position 16mm thick machine cut, mirror polished white mkrana marble of approved quality, colour & shade for Staircase Riser as per the existing pattern at all floor & levels fixed to the correct line & level with required white cement paste of desired consistency including surface preparation, filling & finishing the joints with cement & approved colour pigments, cutting of stone as per required size, cement grouting, including diamond mirror polishing, watering, curing, finishing & cleaning etc. complete to the satisfaction of the Architect / EIC.

Pink Makrana Marble Dado/ Cladding - Providing & Laying in position 16mm thick machine cut, mirror polished pink makrana marble of approved quality, colour & shade for dado/ cladding as per the existing pattern at above floor & levels fixed to the correct line & level with required cement paste of desired consistency including providing SS 316 clamp /brass pin connections to the brick/RCC surface, groove cutting, hole drilling,including surface preparation, filling & finishing the joints with cement & approved colour pigments, cutting of stone as per required size, cement grouting, including diamond mirror polishing, watering, curing, finishing & cleaning etc. complete to the satisfaction of the Architect / EIC.

Pink Makrana Marble Flooring - Gr. Floor -Providing & Laying in position 25mm thick approved Pink Makrana Marble machine cut of approved size, quality, type & colour as per the approved sample for Flooring in approved shape and pattern in true line and level / to required slope over average 50mm thick bedding of quartz sand and white cement mortar (1:4) floated with neat white cement slurry / paste (cement @ 4.5 kg/sqm) including filling, cutting to the required sizes, filling and finishing the cracks with tenax, surface preparation, providing & laying, filling & finishing the joints with neat white cement slurry & approved colour pigments, Dimond mirror polishing, watering curing, cleaning etc complete at all floors & levels as per the instructions of the EIC. (Basic Rate of Pink Makrana Marble Rs. 600 per sqft) (Mode of measurements : Only plan area of flooring shall be measured for payment)

Floor Guard - Providing and laying 3mm thick floor guar

d as per the sample issued including laying the PVC sheets on floor tiles, fixing the sheets by means of masking tapes etc. complete. (Rate is inclusive of material plus labour cost for laying and other related contingencies.) . Contractor has to maintain the floor guard till handing over the such work.

Vitrified Tiles Flooring - Providing and laying 10mm thk. heavy duty, scratch resistant, high abrasion resistant full body vitrified tiles (Durastone or equivalent) conforming to I.S.15622 with special hard wearing layer and water absorbtion less than 0.08% for flooring of an approved, quality, make, pattern and size for flooring including cement mortar bedding of avg. 50 mm thick in 1:4 proportion, for fixing of Vitrified tiles with joint width of 3 mm between adjacent tiles and filling the same with high performance epoxy based chemical resistant tile grout of (Roff or equivalent approved brand) and approved shade complete as per manufacturers specification. Including surface preparation, cutting, leveling, jointing, curing, finishing and cleaning etc. complete as directed by Engineer In Charge. Basic Rate - Rs.60 per Sqft. Size - 600mm x 600mm

Vitrified Tiles Dado - Compound Wall - Providing & laying 600 x 600 x 8mm thk. Vitrified tiles as specified below conforming to I.S. 15622-2006 with water absorbtion less than 0.08% for flooring of an approved quality, make and pattern/ design for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved color grout , curing, finishing, etc. complete as directed by Engineer In Charge.

False Ceiling - Providing & fixing Mineral Board False Ceiling of size 600mm X 600mm and 12 mm thick Random fissured panels Make - Super Seal/ Nittobo / Armstrong or any other approved make to powder coated GI framework of 0.28mm thick and 24mm wide for main support and 15mm wide for secondary support perfect in line and level as per architectural drawings and instructions including making the grooves etc. Cut out for light fixtures & providing necessary GI frames to hang the same independently. GI frame to consist of proprietary supplied frames as per manufacturer’s recommendation. Cost to include all hardware fixtures and scaffolding etc. Complete at all levels and Heights (Mode of measurements : Only plan area of ceiling shall be measured for payment)

FRP Decorative Brackets Providing - Providing of FRP cladding / moulding including fittings etc.replicating original design and specifications. Complete.

Railing - Providing & fixing S.S. pipe hand rail of height 900mm along the staircase consisting of 50 mm dia. 18 gauge 304 grade stainless steel pipe. Supported with 25 mm 18 gauge S.S. pipe (304grade) brackets & 5mm thick tapered edge coller base plate fixed with SS screws at approx. 600 mm center to center fixed horizontally or in inclined position at required height along with necessary vertical supports including grinding the welded joints, buffing,protecting the railing members by means of wrappers during construction etc. complete as per detailed design and directed by the Engineer in charge.

Marble Jali - Refixing existing Marble jali to be fixed in white cement paste including necessary surface preparation, necessary scaffolding, mirror polishing etc.

DGU Panel(Façade) - Providing and doing augusta full height Double Glazed Partition- (augusta 85mm) of modular aluminium Double glazed partition frame of artlinea make 85 series using ALS 017 ( 85 x 32mm) wall starter and using 85 x 32mm DGU section finish with approved anodized finish, glass : 6 mm thk clear toughened glass partition.as per architectural drawing and instructions including necessary hardware, necessary scaffolding, finishing and cleaning etc .completed as specified and as directed by EIC/Architect.

Temporary plywood partition - Providing making and installing full height temporary p

artition wherever required. Partition made of 12mm thk. commercial ply with wooden framework including necessary hardware, scaffolding,etc. Rate also including finishing the partition with approved color applied at one side, removing the same after completion of work, finishing and cleaning,etc. complete. as instructed by EIC/Architect. Mode of measurement will be one side elevational area of the partition.

Repairing and repolishing existing doors with door frame finished with approved melamine polish including necessary hardware, fittings (if any), etc.

Providing and applying Pre-Laying Anti-stain Sealer on Marble at all surfaces as per manufacturer’s specifications and instructions of Laticrete/ Kerakol / Aqua-mix or any other approved make including cleaning the surface before applying, necessary apparatus / equipment, rate to included p/a sealer on marble edges also, finishing and cleaning etc. completed as specified and as directed by EIC/ Architect. (Mode of measurements : Only Plan area of marble flooring and Elevational area of marble cladding shall be measured for payment)

Providing and applying Post-Laying Anti-Stain Sealer on Marble as per manufacturer’s specifications and instructions of Laticrete/Kerakol/Aquamix or any other approved make including cleaning the surface before applying, necessary apparatus/equipment, finishing and cleaning etc. complete as specified and as directed by EIC/ Architect. (Mode of measurements : Only Plan area of marble flooring and Elevational area of marble cladding shall be measured for payment)

FURNITURE : - Executive Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1mm thick External and other side balancing white with 2mm PVC edge finish. Understructure -50x50mm MS powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - MS tray & 60mm grommet, Modesty- 18mm MR grade plywood with both sides mm think External finish. (Basic rate of External laminate - Rs.62/sqft) Table 1 - Size: 1200x600x750mm

FURNITURE : - Executive Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1mm thick External and other side balancing white with 2mm PVC edge finish. Understructure -50x50mm MS powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - MS tray & 60mm grommet, Modesty- 18mm MR grade plywood with both sides mm think External finish. (Basic rate of External laminate - Rs.62/sqft) Table 2 - Size: 1800x750x750mm

FURNITURE : - Executive Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1mm thick External and other side balancing white with 2mm PVC edge finish. Understructure -50x50mm MS powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - MS tray & 60mm grommet, Modesty- 18mm MR grade plywood with both sides mm think External finish. (Basic rate of External laminate - Rs.62/sqft) Table 3 - Size: 1500x750x750mm

FURNITURE : - Executive Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1mm thick External and other side balancing white with 2mm PVC edge finish. Understructure -50x50mm MS powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - MS tray & 60mm grommet, Modesty- 18mm MR grade plywood with both sides mm think External finish. (Basic rate of External laminate - Rs.62/sqft) Table 4 - Size: 950x600x750mm

Cafeteria Table - SS Canteen Table SS Top 18 gauge with matt finishing and Under structure - 40x40mm square tube in 16 gage Size: 1500x900x750mm (10 ft X 2.8 ft x 2.5 ft H)

Work Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1 mm thick External laminate and other side balancing white with 2mm PVC edge finish. Understructure -50x50 MS powder coated legs with 50x25 horizontal support pipe in powder coated finish.Wire Management - MS tray & 60 mm grommet,Modesty- 18 mm MR grade plywood with both sides 1mm think External laminate finish. (Basic rate of External laminate - Rs.62/sqft) Table 1 - Size: 1200x500x750mm

Work Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1 mm thick External laminate and other side balancing white with 2mm PVC edge finish. Understructure -50x50 MS powder coated legs with 50x25 horizontal support pipe in powder coated finish.Wire Management - MS tray & 60 mm grommet,Modesty- 18 mm MR grade plywood with both sides 1mm think External laminate finish. (Basic rate of External laminate - Rs.62/sqft) Table 2 - Size: 1400x500x750mm

Work Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1 mm thick External laminate and other side balancing white with 2mm PVC edge finish. Understructure -50x50 MS powder coated legs with 50x25 horizontal support pipe in powder coated finish.Wire Management - MS tray & 60 mm grommet,Modesty- 18 mm MR grade plywood with both sides 1mm think External laminate finish. (Basic rate of External laminate - Rs.62/sqft) Table 3 - Size: 1500x500x750mm

Work Table - Providing and placing table made of top-25mm MR grade plywood, finished wih 1 mm thick External laminate and other side balancing white with 2mm PVC edge finish. Understructure -50x50 MS powder coated legs with 50x25 horizontal support pipe in powder coated finish.Wire Management - MS tray & 60 mm grommet,Modesty- 18 mm MR grade plywood with both sides 1mm think External laminate finish. (Basic rate of External laminate - Rs.62/sqft) Table 4 - Size: 1800x500x750mm

Workstation with Pedastal - Workstation: Providing and placing workstation made of top - 25mm MR grade plywood with 1 mm laminate finish

other side balancing white with PVC edge finish. Understructure -50x50mm MS powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - ms tray 760mm grommet, privacy screen - 25mm magnetic fabric screen. Pedestal: 18mm MR grade plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. Hardware said to include soft closing hinges, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Workstation - Size: 1150x600x750mm

Workstation with Pedastal - Workstation: Providing and placing workstation made of top - 25mm MR grade plywood with 1 mm laminate finish other side balancing white with PVC edge finish. Understructure -50x50mm MS powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - ms tray 760mm grommet, privacy screen - 25mm magnetic fabric screen. Pedestal: 18mm MR grade plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. Hardware said to include soft closing hinges, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Pedestal - Size: 400x450x710 mm

Workstation w.Pedestal - Workstation: Providing and placing workstation made of top-25mm MR grade plywood with 1 mm laminate finish other side balancing white with PVC edge finish. Understructure -50x50 ms powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - ms tray 7 60 mm grommet, privacy screen - 25 mm magnetic fabric screen. Pedestal: Size: 400x450x710 mm 18mm MR grade plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. Hardware said to include soft closing hinges, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Workstation 1 - Size: 1200x600x750mm

Workstation w.Pedestal - Workstation: Providing and placing workstation made of top-25mm MR grade plywood with 1 mm laminate finish other side balancing white with PVC edge finish. Understructure -50x50 ms powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - ms tray 7 60 mm grommet, privacy screen - 25 mm magnetic fabric screen. Pedestal: Size: 400x450x710 mm 18mm MR grade plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. Hardware said to include soft closing hinges, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Workstation 2 - Size: 1450x600x750mm

Workstation w.Pedestal - Workstation: Providing and placing workstation made of top-25mm MR grade plywood with 1 mm laminate finish other side balancing white with PVC edge finish. Understructure -50x50 ms powder coated legs with 50x25mm horizontal support pipe in powder coated finish. Wire Management - ms tray 7 60 mm grommet, privacy screen - 25 mm magnetic fabric screen. Pedestal: Size: 400x450x710 mm 18mm MR grade plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. Hardware said to include soft closing hinges, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Workstation 3 - Size: 1500x600x750mm

Workstation with Pedestal & Partition - 25mm plywood worktop with 2mm PVC edge banding, mounted on a powder-coated MS tubular understructure; partitions 45–60 mm thick and 1350 mm high made of aluminum frame with modular panels in plywood finished with softboard fabric and 1mm laminate, incorporating concealed wire manager and provision for electrical/data outlets; complete with modesty panel, keyboard tray, CPU trolley, and cable manager; all components factory-finished, modular, and installed on site complete as per approved design, color, and direction of the architect. Pedestal - Size: 400x450x710 mm 18 mm plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Workstation 1 - Size: 1200x600x750mm

Workstation with Pedestal & Partition - 25mm plywood worktop with 2mm PVC edge banding, mounted on a powder-coated MS tubular understructure; partitions 45–60 mm thick and 1350 mm high made of aluminum frame with modular panels in plywood finished with softboard fabric and 1mm laminate, incorporating concealed wire manager and provision for electrical/data outlets; complete with modesty panel, keyboard tray, CPU trolley, and cable manager; all components factory-finished, modular, and installed on site complete as per approved design, color, and direction of the architect. Pedestal - Size: 400x450x710 mm 18 mm plywood with 1mm laminate finish with 3 drawers and 2mm PVC edge finish. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft)

Workstation 2 - Size: 1500x600x750mm

Side table - Providing and placing side storage made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves in 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish placed on standard shelf pins. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Side table 1 - Size: 900x300x750mm

Side table - Providing and placing side storage made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves in 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish placed on standard shelf pins. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Side table 2 - Size: 600x600x400mm

Side table - Providing and placing side storage made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves in 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish placed on standard shelf pins. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Side table 3 - Size: 1700x450x750mm

Conference Room Table - Providing and placing conference table made of top 36mm MR grade plywood with 1 mm External finish other side balancing white with 2mm PVC edge finish. Understructure - min. 3 nos 35mm thick vertical made of MR grade plywood with 1 mm External finish with 2mm PVC edge finish. Wire Management - MS tray & 60 mm grommet, Modesty- 36 mm MR grade plywood with 1mm External side finish Size: 7640x1830x750mm (Basic rate of External laminate - Rs.62/sqft)

Cash-counting Table - Providing and placing conference table made of top 36mm MR grade plywood with 1 mm External laminate finish other side balancing white with 2mm PVC edge finish. Understructure - min. 3 nos 35mm thick vertical made of MR grade plywood with 1 mm External laminate finish with 2mm PVC edge finish. Wire Management - MS tray & 60 mm grommet. (Basic rate of External laminate - Rs.62/sqft) Table 1 - Size: 7640x1200x750mm

Cash-counting Table - Providing and placing conference table made of top 36mm MR grade plywood with 1 mm External laminate finish other side balancing white with 2mm PVC edge finish. Understructure - min. 3 nos 35mm thick vertical made of MR grade plywood with 1 mm External laminate finish with 2mm PVC edge finish. Wire Management - MS tray & 60 mm grommet. (Basic rate of External laminate - Rs.62/sqft) Table 2 - Size: 6500x1200x750mm

Storage Unit - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage 1 - Size: 2400x600x2100mm

Storage Unit - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage 2 - Size: 2850x600x2100mm

Storage Unit

- Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft Storage 3 - Size: 1000x600x2100mm

Storage units - Shutters - Providing and placing cupboard shutters and shelves only (no carcass), made from 25mm MR grade plywood, externally finished with External laminate. Min. 2 adjustable shelves placed on standard shelf pins. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, hardware to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of External laminate - Rs.62/sqft)

Side Storage - Providing and placing side storage made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves in 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish placed on standard shelf pins. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Side Storage 1 - Size: 900 X 300 X 750 mm

Side Storage - Providing and placing side storage made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves in 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish placed on standard shelf pins. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Side Storage 2 - Size: 750 X 300 X 750 mm

Side Storage - Providing and placing side storage made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves in 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish placed on standard shelf pins. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Side Storage 3 - Size: 1000 X 300 X 750 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 1 Size: 3000 X 600 X 2100 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architec

t’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 2 Size: 2100 X 600 X 2100 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 3 Size: 1600 X 600 X 2100 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 4 Size: 750 X 600 X 2100 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 5 Size: 1050 X 600 X 2100 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard sh

elf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 6 Size: 2150 X 600 X 2100 mm

Storage - Providing and placing storage - carcass made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish with min. 2 adjustable shelves placed on satndard shelf pins, made of 18mm MR grade plywood with 1mm laminate finish and 2mm PVC edge finish. Shutters made from 18mm MR grade plywood, externally finished with 1mm laminate. All exposed edges to be finished with matching 2mm PVC edge. Shutters to be double-leaf openable, fitted with concealed soft-close hinges, and necessary hardware like handles, locks, magnetic catch, etc., of approved make, as per Architect’s design and instructions. Hardware said to include soft closing hinges, L chips, shelves support, SS handles, approved suitable locking provision, screws, leveling bolts, inserts, etc. complete as approved by architect/ designer. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Storage - 7 Size: 1550 X 600 X 900 mm

Shelves - Providing and fixing 8mm thick toughened glass shelves with polished edges, using SS 304 grade brackets / supports or approved concealed fittings. Glass type: clear / frosted / tinted – as per Architect's approval. Hardware to be heavy - duty, rust-proof, and suitable for load- bearing. All edges to be smooth and safe. placing to be level, firm, and as per design. All materials, makes, and finishes shall be as per approved sample and in accordance with the Architect’s design and instructions. Size: 600x300mm

Bed - Providing and placing a modular single bed fabricated from MS powder-coated rectangular tubes (min. 1.2mm thick), featuring a welded frame with slat mattress support. The bed shall have adjustable feet or rubber pads for floor protection, with all edges smooth and finishes resistant to corrosion and chipping. Finished as per architects/ designers approval. Size: 1800x900x300mm

Reception Table - Providing and placing reception table made of top 36mm MR grade plywood with 1mm laminate finish other side balancing white with PVC edge finish. Understructure - 2 nos. 35mm verticals made of MR grade plywood with 1mm laminate finish with PVC edge finish. Wire Management - MS tray & 60 mm grommet, Modesty- 36mm MR grade plywood with 1mm laminate side finish. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Reception Table 1 - Size: 2650x750x750mm

Reception Table - Providing and placing reception table made of top 36mm MR grade plywood with 1mm laminate finish other side balancing white with PVC edge finish. Understructure - 2 nos. 35mm verticals made of MR grade plywood with 1mm laminate finish with PVC edge finish. Wire Management - MS tray & 60 mm grommet, Modesty- 36mm MR grade plywood with 1mm laminate side finish. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Reception Table 2 - Size: 1200x600x750mm

Reception Table - Providing and placing reception table made of top 36mm MR grade plywood with 1mm laminate finish other side balancing white with PVC edge finish. Understructure - 2 nos. 35mm verticals made of MR grade plywood with 1mm laminate finish with PVC edge finish. Wire Management - MS tray & 60 mm grommet, Modesty- 36mm MR grade plywood with 1mm laminate side finish. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Reception Table 3 - Size: 2100x600x750mm

Visitor Chiar - Supplying and delivering high-quality, durable moulded plastic chairs, made from polypropylene (PP) or equivalent material. Chairs shall be stackable, lightweight, weather-resistant, non-fading, and suitable for both indoor and outdoor use. Chairs shall be free from sharp edges or manufacturing defects. Size: Standard adult s

ize (approx. 450 mm seat height, 450 mm seat width, 800–850 mm overall height). Size: 450x450x850mm

Cafeteria Chairs - Supplying and delivering high-quality, durable moulded plastic chairs, made from polypropylene (PP) or equivalent material. Chairs shall be stackable, lightweight, weather-resistant, non-fading, and suitable for both indoor and outdoor use. Chairs shall be free from sharp edges or manufacturing defects. Size: Standard adult size (approx. 450 mm seat height, 450 mm seat width, 800–850 mm overall height). Size: 450x450x850mm

Mid back Chair - Mid Back Chairs with moulded mesh back, Fixed Arm Rest, Centre Tilt mechanism, DIN Class 4 gas lift, Metal Powder base and Nylon Castors. Size: 450x450mm

High back Chair - High Back Mesh Chair Optima Mesh Standard With Headrest Fabric Upholstered Cushion Seat Multilock With Seat Sliding Mechanism Three Way Adjustable Arms (Height & Swivel) Chrome Magna Base. Size: 450x450mm

Conference Room Chair - Mid Back Chairs with moulded mesh back , Fixed Arm Rest, Centre Tilt mechanism, DIN Class 4 gas lift, Metal Powder base and Nylon Castors. Size: 450x450mm

Waitng area Chiar - Mid Back Chairs with moulded mesh back, Fixed Arm Rest, Centre Tilt mechanism, DIN Class 4 gas lift, Metal Powder base and Nylon Castors. Size: 450x450mm

Singal Seater Sofa - Providing and placing single seater sofa with legs and framing made in CP Teak wood of 3”x 2” section with legs and exposed parts of frame in one piece each without cuts or joints except joinery at junctions. High density Foam filling of 40-45kg/cum, covering with light cotton fabric for seat, backrest and armrest and inclusive of all Beading 1”x1”. All exposed wood to be polished. Size: 600x600x850mm

2 seater sofa - Providing and placing 2 seater sofa with legs and framing in CP Teak wood from 3” x 2” section with legs and exposed parts of frame in one piece each without cuts or joints except joinery at junctions. High density Foam filling of 40-45kg/cum, covering with light cotton fabric for seat, backrest and armrest and inclusive of all Beading 1”x1”. All exposed wood to be polished. Size: 1500x600x850mm

3 seater sofa - Providing and placing 3 seater SOFA with legs and framing in CP Teak wood from 3” x 2” section with legs and exposed parts of frame in one piece each without cuts or joints except joinery at junctions. High density Foam filling of 40-45kg/cum, covering with light cotton fabric for seat, backrest and armrest and inclusive of all Beading 1”x1”. All exposed wood to be polished. Size: 1800x600x850mm

6 seater sofa - Providing and placing 3 seater SOFA with legs and framing in CP Teak wood from 3” x 2” section with legs and exposed parts of frame in one piece each without cuts or joints except joinery at junctions. High density Foam filling of 40-45kg/cum, covering with light cotton fabric for seat, backrest and armrest and inclusive of all Beading 1”x1”. All exposed wood to be polished. Size: 3000x600x850mm

Lockers - Providing and placing locker storage unit of overall size 2940mm (L) x 2100mm (H) x 450mm (D), comprising 36 lockers (6 rows × 6 columns), constructed from 18mm MR-grade plywood with both-side laminate finish. Each locker approx. 400mm (W) x 350mm (H) x 400mm (D), with shutters including two horizontal ventilation slits (10mm x 100mm each). All exposed edges to be finished with 1mm PVC edge. Shutters shall have concealed soft-close hinges, individual locks with key, and integrated finger-pull or groove handles. (Basic rate of laminate: Internal - Rs.35/sqft and External - Rs.62/sqft) Size: 400x400x350mm

Waiting chairs - Welded - Providing and placing welded-type waiting chair, in 3-seater units, made with a powder-coated mild steel (MS) frame. Seat and back to be in upholstered finish (as specified by the Architect), ergonomically designed with smooth, rounded edges and a durable surface. Each unit shall have fixed armrests at both ends and be finished with scratch-resistant, corrosion-resistant powder coating (standard shade or as approved). Legs to include non-slip rubber foot caps for floor protection. Size:1500x600x750mm

ELECTRIFICATION : - Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe.

Supplying, erecting & terminating FRLS XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FRLS XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting

copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 Kv

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 kV

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution,etc. (All above contents shall be of standard makes)

Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM.

Supplying & erecting of occupancy sensor light switch cum daylight sensing having a coverage area of around 20 Sqm for small movements & around 50 Sqm for large movement with site adjustable off timing / dimming & instant on/off. LRM1061/00 Occuswitch Surface Mount Mains Connection Voltage- 100-27VAC; 50/60Hz Mains Surge Immunity- 4kV/4kV Power Consumption Stand-by- <1W Maximum Load-4A Load Peak inrush current- <110A Applicable Wire Range- 0.75 to 1.5 sqmm Switch Off dealy- 2 (default)/5/15/30 minutes Light Levels- Disable/10/30/100lux Protection Class- IP20 Lifetime- 50,000 hrs

Supplying and erecting LED square / circular 9 to 12W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected,complete.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W.

Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm/1200x300mm and finishing the background to match the original ceiling surface.

Supplying, Erecting ,Testing & Commissioning Ceiling or wall Mounting type 400A Capacity at 40C ambient temperature Air Insulated type Bus Trunking Aluminium Conductor having purity not less than 99.6% with Tin plated at joints suitable for (3L+N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosures as integral earth (PE) BBT Shall type tested as per IEC 61439-6 with IP 54 Protection, 25KA short circuit rating for 1sec, Insulation Class F (155 C), casing made of Galvanized / powder coated steel sheet enclosure having Mechanical strength certification up to IK10, with required shade of paint & having cross sectional area not more than 0.0270 Sq m, complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories with , outlet cover , plug in hole as per site requirement with Horizontal / Vertical G.I. Support at required interval, with External Single Run 25x10mm Aluminium earthing strip or Internal Integral Earth complete confirming to IEC 61439-6 as per specification

Supplying, installation, testing and commissioning of Flange end as per design requirement & site condition suitable for Aluminium 400A, 3 phase 4 wire 415V, 50 Hz A.C ,25kA short circuit rating for 1 sec for Air Insulated type BBT. With necessary accessories complete confirming to IEC 61439-6 as per specification

Supplying, installing & Commissioning Vertical or Hori

zontal 90 Degree/Tee Elbow for Air Insulated type bus trunking/ rising mains of capacity 400A, 3 Phase 4 Wire 415 V, 50 Hz AC Supply,25kA short circuit rating for 1 sec Made Galvanised sheet metal enclosure (IP54) duly powder coated with all necessary accessories complete confirming to IEC 61439-6 as per specification.

Supplying, installing, testing & commissioning of Tap off box with interlock arrangement on existing Air Insulated / Sandwich type bus trunking/ rising mains for 32A to 125A 3 phase 4 wire 415V, 50Hz AC Supply made with High Grade Plastic enclosure with provision of MCB/ MCCB without (MCB/MCCB) complete as required confirming to IEC 61439-6 as per specification

Providing & erecting 4 Pole MCCB 415V, 100A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type)

Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type)

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel. Note:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying, erecting & marking SPMCB 6A to 32A, b-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board. (FOR UPS & HVAC OUTDOOR)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting mains with 3x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places

Supplying and erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places

Supplying & erecting H.M.S. P.V.C. conduit 20 mm. dia. With necessary accessories in wall/floor with chiselling appropriately

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. With necessary accessories in wall/floor with chiselling appropriately

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying, erecting & commissioning MDF Box 150x150 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete.

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying & erecting 10 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG11 as per specification No. WG-TW

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specificatio

n No. WG-COC/PC

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/GBS

Supplying & fixing 24 port Patch Panel with tool less keystone jacks in provided U Rack complete as per specification no. WG- NAS/PP

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 17U floor mount rack (Dimension-DxWxH – 800x600x954 mm) as per specification No. WG-NAS/RAK

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and fixing dual-band POE 3x3 Mesh Router, 802.11 n/ac, standalone/software based access point complete.

Supplying, erecting, testing and commissioning of 3kVA capacity online pure sine wave with backup time of 01 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/100Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification No: WG-DM/PW

Dismantling the existing Telephone / LAN / WAN / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW

Dismantling the existing aluminium/copper mains, sub-mains wiring upto 10 sq.mm. along with accessories etc. complete as per specification No: WG-DM/PW

Dismantling the existing W.T. fluorescent fitting / S.V./ M.V. / M.H. lamp /LED fitting from wall with brackets and making the site as original complete

Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear.

Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame

Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq.mm.

Dismantling the existing cables of all types & size above 50 sq mm.

FIRE FIGHTING : Hydrant & Supplying and Sprinkler Supplying and erecting ABC powder type fire extinguisher as per IS : 15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying and erecting Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 Kg capacity cartridge type con. to IS: 15683 complete erected with necessary clamp made from 50 mm x 6 mm M.S.flat with nut and bolts grouted in wall complete.

Providing floor mounting stand for keeping 4 Nos. of Fire Buckets 1500 mm in length, 900 mm in height frame made out of 30x30x4 mm. angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.

Providing round bottom Fire bucket of 9 Litres capacity as per IS: 2546 made out of 24 guage G.I. sheet with extra handle at bottom duly painted white inside and red outside with Fire mark , on provided stand/wall hook .

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1600 to 1800 LPM at 70 to 55 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 30kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 LPM at 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 m head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation

duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (2working) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. Main fire pump(MFP) having capacity of 30 kW 2 nos b. Jockey pump(JP) capacity of suitable capacity 2 nos c. Diesel pump of suitable capacity 1 nos comprises of the following features & switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 2 core 1.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting PVC armoured cable 12 core 1.5 sq mm Cu conductor with continuous G.I. earth wire complete erected with glands and lugs, on wall or laid in provided trench/ pipe /cable trey as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and installing G.I. pipe above ground of C class ERW of size 200 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 150 mm dia with with necessary fittings as per specification no. FF-PP

Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 150 mm Ring Main of Fire Fighting System.

Excavating soft Murum/Soil roadby chiseling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good.

Supplying and installing G.I. pipe above ground of C class ERW of size 100 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 80 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 65 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 50 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 40 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 32 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 25 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and erecting cast iron double flange NRV of size 200 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 50 mm dia complete as per specification no. FF-VL/NRV

Supplying and installing cast iron double flange Butterfly Valve of size 150 mm dia as per specification no. FF-VL/BFV

Supplying and installing cast iron double flange Butterfly Valve of size 100 mm dia as per specification no. FF-VL/BFV

Supplying and installing cast iron double flange Butterfly Valve of size 50 mm dia as per specification no. FF-VL/BFV

Supplying and erecting stainless steel Single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying SS Branch Pipes of 63 mm dia. fitted with 20 mm dia detachable hexagonal multipurpose nozzle as per specification FF-FFA/NEW

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting M.S./CRCA cabinet for housing Hydrant valve, hose pipe and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying and erecting 25 mm dia GM Air Release Cock with necessary GI coupling to be fitted on top of air vessel or on wet riser as per specification FF-FFA/ARV.

Supplying and installing Air Vessel of 300 mm dia 1.5 mtr in height M.S. tank installed inside pump house as per specification no. FF-FFA/ACT.

Supplying and installing Fire Brigade Header of 150 mm dia, for supplying water in fire tank as per specification no. FF-FFA/FBC

Supplying and installing Fire Brigade Header (Siamese Connection) of 150 mm dia, supplying water to wet riser system as per specification no. FF-FFA/SMC

Supplying and erecting 150 mm dia Cast Iron end line strainer of T-Pot type flanged end pattern, PN16 pressure rating, screen of SS and end connection with flanged, for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 75

/80 mm dia Cast Iron end line strainer of T-Pot type flanged end pattern, PN16 pressure rating, screen of SS and end connection with flanged, for positive suction complete as per specification no. FF-VL/ELS

Supplying and installing wall mounted swinging Hose Reel Drum fitted with 19 mm dia 30 mtr long high pressure polypropylene (polyhose) pipe fitted with necessary accessories complete as per specification no. FF-FFA/HRD

Supplying and erecting one no. Brass orifice plate having 6 mm thickness, 140 mm outer dia at every single outlet hydrant valve as per specification No. FF-FFA/OP

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying and installing gun metal gate valve of size 25 mm dia as per specification no. FF-VL/GV.

Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished (pendent / Upright type) quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR

Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished Extended coverage Sidewall quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR

Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished Sidewall quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR

Supply, Installation, testing & commissioning of UL listed / FM approved S S Braided flexible drops 25 mm dia capable to with stand maximum working pressure of 175 psi with all fittings for making connection to sprinklers and with the branches 1.2 Mtrs in length

Supplying and erecting cast iron double flange sluice valve 200 mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 150 mm dia. complete as per specification no. FF-VL/SV

Supplying and installing Cast iron double flange Sluice valve 100 mm dia as per specification

Supplying and installing Cast iron double flange Sluice valve 80 mm dia as per specification

Supply & Installation of Stainless steel finish rossette plate of dia 75 mm for below false ceiling application as per specification

Supply, Installation, testing & commissioning of Installation control (Alarm) valve of cast iron body and brass/ bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box ball valves, MS pipe of reqd. size, flanges, orifice plate, gasket etc. of size 150 mm dia as reqd.

Supply, Installation, testing & commissioning of flow switches in 80/100/150 mm dia pipe with all accessories as required

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying and fixing of Signages-Exit (Nightglow with lamination, Self adhesive) 100 mm x 300 mm

Supplying and fixing of Signages-Staircase (Nightglow with lamination, Self adhesive) 100 mm x300mm

Supplying and fixing of Signages-Fire Alarm (Nightglow with lamination, Self adhesive) 200 mmx250 mm

Supplying and fixing of Signages-Fire Extinguisher (Nightglow with lamination, Self adhesive) 200 mm x200mm

Supplying and fixing of Signages-Hose reel (Nightglow with lamination, Self adhesive) 200 mm x250mm

Supplying and fixing of Signages-Assembly Point (ACP with MS, Grouted) 600 mm X600 mm

DETECTION & PA SYSTEM : - Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, erecting, testing and commissioning amplifier 120 W for Public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply as per specification No. FF-PA/AFR

Supplying, erecting, testing and commissioning sound column 15 to 30 Watts complete as per specification No. FF-PA/ SOC

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

SEWAGE TREATMENT PLANT : Sewage Treatment Plant (MBBR Packaged Type STP) : - Design, supplying, installing, testing & commissioning of Sewage Treatment Plant 15 KLD (excluding excavation, back filling & disposal of surplus earth Civil construction work) for the following duty:

Daily average flow - 15 Cum / Day Inlet Parameters PH - 7 – 8.5 BOD5 - 250 – 300 Mg/L COD - 300 – 500 Mg/L Oil & Grease - 20 Mg / L Effuluent Discharge Standard After Tertiary Treatment pH - 6.5 – 7.5 BOD5 - 5 Mg/L S. Solids - 5 Mg/L COD - Less than 20 Mg/L Oil & Grease - BDL

Sewage treatment plant shall include the following items: Bar Screen Sewage Transfer Pump with IE3 rated motor(1 Working + 1 Standby) Prefabricated MBBR tank MOC :- Mild Steel with epoxy coating or Equivalent.

Air Blower (1 working + 1 standby) Type :- Twin lobe rotary compressor complete with motor MOC :- CI Tube Settler MOC :- Mild Steel with epoxy coating /RCC/ FRP / Equivalent Hypo Dosing System MOC:- HDPE/PP/ Equivalent Filter Feed Pumps with IE3 rated motor (1 working + 1 standby) Type :- Centrifugal Horizontal MOC :- Casing – CI, Impeller - Bronze, Shaft - SS Multi Grade Filter(MGF) MOC :- Mild Steel with epoxy coating Pressure Gauge (Inlet & Outlet) Working Pressure : 3.0 kg/cm2 Activated Carbon Filter (ACF) Working Pressure :- 2.5 kg/cm2 MOC :- Mild Steel with epoxy coating Pressure Gauge (Inlet & Outlet) Sluge Transfer Pumps with IE3 rated motor (1 working + 1 standby) Type :- Centrifugal Horizontal MOC :- Casing – CI, Impeller - Bronze, Shaft - SS

Filter Press Feed Pumps with IE3 rated motor (1 working + 1 standby) Type :- Centrifugal Horizontal Valves MOC :- PVC PN 10 Rating / CI-Teflon coated contact parts Piping MOC :- PVC PN 10 Rating/ PP of same rating/MS with external coating. IP54 Rated Electrical Control Panel & Cabling MOC :- MS - Powder Coated

Dismantling of existing STP with other accessories

BIO-COMPOSTER : - Supplying, installing, testing and commissioning of Microorganism Based Fully Automatic Bio Composter (Composting Machine) of 15kg Per Day Waste Processing Capacity.Composting Tank Material should be SS ( Stainless Steel ) and outside body can be either SS or MS with powder coated. Control Panel System should be powder coated panel enclosure, drive starters, breakers, push button indicators, auto manual switch, single phase preventer, emergency switch & timer control. Power Supply & Frequency should be 415-440 Volts / 50 Hz Phase 3 (Three ) Phase A.C. supply.

BLUMBING : Sanitary Fixtures : - Providing and fixing white european type wall-hung pan,of size 350mmx355mmx570mm concealed flush tank with floor-mountingframe installing kit and drain pipe connection set for wallhung WC,with approved makes quare control plates including soil pipe,vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc. complete.

C.P. Handshower (health faucet) 1m. PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) as directed by Engineer in charge.

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing White glazed urinal of size 710x460x300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete. as directed by Engineer in charge.

Providing and fixing Table top white wash basin of size120x635x405mm rubber plugs and brass chain, with C.P. Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection upto the outside face of the wall.etc complete as directed by Engineer

in charge.

C.P.pillar cock (ISI) jaquar make continental

Providing and fixing stainless steel sink of size 600x510x200mm incluidng waste coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. as directed by Engineer in charge.

C.P. sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) as directed by Engineer in charge.

Dismantling of existing STP with other accessories

Providing and fixing JAQUAR MAKE,HOTELIER series Model No. 1551 Toilet Paper Holder Recessed type (S.Steel) including cutting and making goodthe wall wherever required etc complete. as directed by Engineer in charge.

Providing and fixing ISI marked make CP brass liquid soap dispensers with CP brass bracket capacity 250 ml. as directed by Engineer in charge.

BLUMBING : Sanitary Fixtures : - Providing and fixing white european type wall-hung pan,of size 350mmx355mmx570mm concealed flush tank with floor-mountingframe installing kit and drain pipe connection set for wallhung WC,with approved makes quare control plates including soil pipe,vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc. complete.

C.P. Handshower (health faucet) 1m. PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) as directed by Engineer in charge.

Supplying and erecting ultra violet storage type Water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200) as directed by Engineer in charge.

Providing fixing testing and commissioning 0.9m x 1.25m x 1.0m deep Grease trap (0.60m liquid height) constructed out of 230 mm brick masonry with PVC Tee connection for inlet outlet & vent, DI MD Manhole cover and frame (Cover size 0.9 x 0.45 m wide 2 nos.) , 40 mm thick Kaddappa baffle wall situated across the chamber. Trap shall be internally smooth plastered with internal & externally Complete with 2 Nos 0.4 M x 0.85 M x 0.1 M high SS 304. perforated trey's with handles on both side including all accessories mounting. complete as specified in drawing Note : Fixtures are for referance only, finalization of type of fixture are based on Client/ Architect/Interior team by considering all standards, lavish & aesthetic look, etc.

WATER SUPPLY SYSTEM : - Providing and fixing on walls/ ceiling/ floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 50mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

65mm dia. Pipe

80mm dia. pipe

100mm dia. pipe

Providing and fixing on walls/ ceiling/ floor 65mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 80mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 20mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 25mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 32mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Cost shall be inclusive of excavation, dewatering, backfilling, ramming surrounding the pipe all round with minimum 150 mm thick all round compacted silver sand and providing thrust block. All work complete as per specification and satisfaction of the Engineer In charge.

65mm dia. pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Supplying and erecting 25 mm Ball Valve complete with PN16 pressure rating, as per specification no. FF-VL/BV

Providing and fixing 32/40 mm Ball Valve complete with PN16 pressure rating, as per specification no. FF-VL/BV

Providing and fixing 50 mm Ball Valve with complete with PN16 pressure rating, as per specification no. FF-VL/BV

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FFVL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of

air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Providing and fixing 80 mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing & fixing 25mm pressure reducing valve on down take water supply

Providing & fixing 32mm pressure reducing valve on down take water supply (diaphragm type with inbuilt SS strainer)

Providing & fixing 40mm pressure reducing valve on down take water supply pipes (diaphram type with inbuilt SS strainer)

Supplying & fixing & testing pressure reducing valve of diaphram type & inbuilt SS strainer type with necessary connectors. C) 50 mm (2") dia.

Supplying & fixing & testing pressure reducing valve of diaphram type & inbuilt ss strainer type with necessary connectors. B) 65 mm (2 1/2") dia.

Supplying & fixing & testing pressure reducing valve of diaphram type & inbuilt ss strainer type with necessary connectors. A) 75 mm (3") dia.

Dismantling of existing water supply system

DRAINAGE SYSTEM : - Providing and fixing on walls/ ceiling/ floor 32mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 40mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 50mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 75mm dia stabiliser pipe/ P.V.C. soil, vent/ waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent ,clamps etc. complete

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil, vent/ waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent ,clamps etc. complete

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) SN8 of HDPE for enclosing cable below ground/road surface, complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) SN8 of HDPE for enclosing cable below ground/road surface, complete.

Providing and fixing square-mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

150 x 100 mm size P type :- With sewer bricks conforming to IS : 4885

Providing and constructing Brick Masonry Inspection Chamber 60cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 90cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 Kilogram with lid and frame fixed in cement concrete.

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement:4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

With Sewer bricks conforming IS : 4885 (Nos)

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :With Sewer bricks conforming IS : 4885 (RMT)

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not

With Sewer bricks conforming IS : 4885 (Nos)

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With Sewer bricks conforming IS : 4885 (RMT)

Supply, Installation, testing and commissioning of 75mm NB PVC Nahani Trap of self cleaning design and water seal of 50mm. Including 125mm dia SS grating jointing, embedding in concret etc. complete. Rate to include making of opening in floor, marbles / tiles for fixing SS grating. etc. complete as directed and accepted by the Engineer In Charge.

Supply, Installation, testing and commissioning of 100x75mm NB PVC Multi Trap of self cleaning design and water seal of 50mm. Including 125mm dia SS grating jointing, embedding in concret etc. complete. Rate to include making of opening in floor, marbles / tiles for fixing SS grating. etc. complete as directed and accepted by the Engineer In Charge.

Dismantling of existing drainage system

RAIN STORM DRAINAGE : - Providing and fixing P.V.C .Rain water pipes of 160mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S.13592-1992 including proper rain water receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing P.V.C .Rain water pipes of 110mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S.13592-1992 including proper rain water receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with

solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

C.I. grating 150x150 mm

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With Sewer bricks conforming IS : 4885 (RMT)

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 300 MM(300wide)

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. b) 600 x 450 MM (450wide)

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. c) 600 x 600 MM (600wide)

C.I. grating 150x150 mm

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With Sewer bricks conforming IS : 4885 (RMT)

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 300 MM(300wide)

Providing and constructing Brick Masonry Inspection Chamber 60cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. grating cover of 75 Kilogram with lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 90cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and C.I. grating lid cover of 75 Kilogram with lid and frame fixed in cement concrete.

R.C.C.pipe Np3 class 225mm dia. 2m long, as directed and accepted by the Engineer In Charge.

C.I. grating 150x150 mm

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With Sewer bricks conforming IS : 4885 (RMT)

Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 300 MM(300wide)

R.C.C.pipe Np3 class 300mm dia. 2m long, as directed and accepted by the Engineer In Charge.

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 450mm diameter in properline, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 600mm diameter in properline, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

PUMP ROOM : - Water Supply Piping Inside Pump Room : - Supplying and erecting GI pipe 50mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting GI pipe 65mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting GI pipe 75/80mm dia ‘C’ class position with accessories complete as per specification no. CW-PLB/GP.

65mm dia. Pipe

(UGT TO OHT - Water Trasfer Pump) : - Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C. supply of 3.75 kW/5 HP with discharge 715/200 lpm for head of 17/39 m and 65 mm suction/50 mm delivery pipe on provided CC foundation as per specification no. WP-CGP.

200 LPM@ 40MTR HEAD - Domestic Water Supply

Supplying, erecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying, erecting, testing and commissioning of Automatic control panel for three phase , 415 V, A.C. supply, submersible/centrifugal pump set upto 7.5 HP consisting of D.O.L. starter having relay range 9-14 A, S.P.P., combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc.

Water level controller : - Supplying, erecting, testing and commissioning of water level controller 230/415 V, A.C. supply , two way under ground tank operation only.

Supplying, erecting, testing and commissioning of water level controller 230/415 V, A.C. supply , four way under ground & over head tank operation only.

Booster Pump - (For Top 2 Floor- Treated Flushing water Supply ) Supplying & erecting pressure booster pump, single phase, 50 Hz, A.C. supply of 0.75 kW/ 1 HP, With discharge of 480 to 13 lpm for 10 to 50 mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications (with 24 ltr water tank) as per specification no. WP-PP

270 LPM @ 20 MTR - Flushing Water Supply