Construction of 13 buildings at various locations in India for Unified Network Management System (UNMS), including finishing works, water supply an sanitary installations, electrical installations and cable laying, Automatic Fire SH Reception counter

Amount

Customised fabrication of Reception counter for two persons of overall size 4.00 m x 1.10 m. The counter shall be made as per the size and shape approved by the Arctitect with 18 mm BWP Premium Grade Ply of Century ply make manufactured from Gurjan wood for basic structure and design of the table. The exposed portions of the table shall be finished with Nero Black 291 Laminate of century Laminate make and 12 mm Dupont white sheet for counter 'CORIAN GLACIER" on top of reception counter as per the approved drawing and of approved manufacturer and shade. The facia of the counter shall be finished with Laminate of Century Laminate make Facia (111CS-3) (New shade) as per approved drawing. The counter shall have teak wood lippings, support of scantling for the top shade for computers as per the drawing. The counter will be provided with additional two nos. Pre-fabricated and movable cabinet units of 3-drawers each. The basic structure of the drawers is made of 18mm BWP premium garde ply of Century Ply make manufactured from Gurjan wood and finished with laminate of century laminate make facia (111CS-3) (New shade). The drawers shall run on Hettich make Drawer slides- Quadro and fitted with Hettich make Drawer lock and handles.The rear side of facia shall be provided with Armstrong Celotex Pinup board surfaced with Bhilwara make scotch Guarded & Fire Resistant coating- Jacquard Cloth for mounting on Pinup board. The counter shall be provided for provisions for various electrcal and electronic fixtures. The teak wood lipping where exposed shall have to be polished with Lacquered Polishing - Chocolate Brown/Black as per the approved drawing. [NOTE: The work shall be executed as per the Architectural drawing No: WD-55/3154 issued by the Chief Architect, BSNL, Shimla and the decision of the Engineer-in-charge shall be treated as final].