Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.2 LAccepted-AOC PLOT NO 2 INDUSTRY AREA NEAR LAL WARE HOUSE OPP OLD HOUSING BOARD COLONY SIRSA SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | 1 | Accepted-AOC Lowest | |
| 2 | 2₹10.7 L+₹1.1 L (11.5%)Rejected-Finance | 2 | Rejected-Finance Other than Lowest | |
| 3 | 3₹10.8 L+₹1.2 L (12.6%)Rejected-Finance | 3 | Rejected-Finance Other than Lowest |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Highground
AGE (I) Highground Air Force station Highground Chandigarh
MISC REPAIR TO MD ACCN AT AIR FORCE STATION BARWALA UNDER AGE (I) HIGHGROUND CHANDIGARH
2022_MES_551455_1
AGE(I)/HG CHD/T-04/2022-23
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) Highground
₹24,000
Yes
26 Dec 2022
12 Sept 2022
27 Oct 2022
12 Sept 2022
25 Oct 2022
5 Oct 2022
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removing from site as in Sch of credit and removal of debris outside MOD land, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site as in Sch of credit, and removal of debris outside MOD land, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down wooden shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and refixing in the same opening after necessary repair, easing and adusting, jointing replacement/refixing of mongries etc, complete all as specified and directed.
Resecuring or easing & adjusting without taking down Shutters of any description exceeding 1 sqm each and not exceeding 2 sqm complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 105 mm x 60mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.
Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing similar work conforming to Fe-290 Grade E-165, complete all as specified and directed.
Supply and fixing flush shutters 30 mm thick, solid core constuction, with block board core and plywood face panels commercial face on both side complete all as specified and directed.
Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton factory made shutters, open rebated and prepareddivided into squares(04 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.
Supply and fixing factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick Moulded prelaminated PVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on back face supplying and fixing in frame at site as shown in drawing in SSR complete all as specified & directed.
Supply and fixing in repair 19 to 20 mm thick block boards grade 1 quality, exterior grade, commercial type fixed with screw to timber frame work complete all as specified and directed.
Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/2 & 2/2.
Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/3 & 3/3.
Supply and fixing factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.
Supply and Fixing MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.
Supply and Fixing, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.
Supply and Fixing in repairs, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.
Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, including replacement of damaged wooden bedding with and including two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fixing plain sheet glass 3 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins, complete all as specified and directed.
Supply and fixing butt hinges, medium weight, 100mm long, cold rolled mild steel , complete all as specified and directed.
Supply and fixing butt hinges, medium weight, 75mm long, cold rolled mild steel , complete all as specified and directed.
Supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.
Supply and fixing in repairs, 140 mm door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.
Supply and fixing Hasp and staple of size 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fixing in repairs Hasp and staple of size 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fixing, 125 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing, in repairs 125 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.
Supply and fixing in repairs 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and fixing in repairs, Aluminium alloy, anodised, sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and fixing in repairs Door seal strip with plastic beading, complete all as specified and directed.
Providing, plain cement concrete(1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including water proofing compound as per manufacturers instruction @3% of cement weight including necessary form work complete all as specified and directed
Material and labour applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.
Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.
Dismantling wrought or mild steel work work of any description not otherwise provided for complete as specified and directed.
Supply and fixing, in repair PVC powder coated drapery rod of mild steel 25 mm dia, ribbed/fancy type, any shade, including a set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessories, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.
Welding in repairs not exceeding 2.5 cm in length (thickness of metal to be welded not exceeding 6 mm), for maintenance of steel items such as gates, grills, doors, windows etc, including cleaning and preparing surfaces and holding the members in true position, complete all as specified and directed.
Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc and removal of rubbish outside MOD land, complete all as specified and directed.
Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.
Material and labour, brickwork with using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 76 here-in-before shall be reused after proper cleaning & washing etc.
Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even smooth without using extra cement, complete all as specified and directed.
Material and labour for preparation of newly plastered ceilling surfaces and applying three coats of white wash complete all as specified and as directed.
Demolition of cement concrete ( unreinforced) in ground floors and pavings n. exe 15 cm thickness (below or above ground level ) including removal of debries out of defence land complete all as specified and directed
Material and labour for PCC 1:3:6, Type C-2 using 40 mm graded stone aggregates as in plinth protections 50 mm thick, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar, complete all as specified and directed.
Material and labour for 40 mm thick, PCC 1:2:4, Type B-1 using 20 mm graded stone aggregates finished even and smooth using extra cement complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.
Material and labour for First quality, glazed designer pattern, jointed ceramic coloured tiles, 6-7mm thick, of size 450mm x 350mm or 450mm x 300 mm fixed in pattern as directed, on vertical surface such as in skirting, dados, risers to steps, etc., set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10 mm thick rendering in CM (1:3),complete all as specified and directed.
Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing rubbish outside defence land complete all as specified and directed.
Material and labour for 15-18mm thick Granite (of any type) work, machine cut, (table rubbed and polished) as on cooking platforms, counter-slabs, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting for counter WHB, moulding the corners/edges and making holes for cooking gas, grinding & polishing, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for including removal of debries out of defence land and stacking of scrap iron complete all as specified and directed.
Material and labour for Reinforced Cement Concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note: Reinforcement steel bars and form work shall be measured and paid separately.
Material and Labour for mild steel TMT bars 8 mm dia and over upto 10 mm dia as in stirrups, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.
Formwork to sides & soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc.also splays between floors and beams, etc. complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
Supply and fixing in repairs 110 mm dia bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and directed.
Supply and fixing 110mm bore PVC (SWR) bends any radius, fixed to pipes with adhesive, complete all as specified and directed.
Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.
Demolition of mud phuska on roofs, any thickness, including plaster and leeping plaster and bottom layer of polythene film if any, including removal of retrieved material outside defence land, complete all as specified directed.
Material and Labour for cutting out cracks to 'V'-section in existing RCC roofs or terracing, cleaning out , wetting, grouting with cement slurry 1:3, complete all as specified and directed.
Material and Labour plain cement concrete (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerb, roof pading and like, including water proofing compound as per manufacturers instruction @3% of cement weight, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
Material & labour for cutting groove in brick wall 75 mm wide and 65 mm deep shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for water proofing treatment of RCC roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30litre/Sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60Kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps (100mm side lap and 150 mm end lap ) & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.
Material and Labour, 40mm thick brick tiles laid on and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed.
All as per serial item No 71 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable ties as obtained from Serial item No 65 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
Material and labour for rendering 10 mm thick in cement mortar (1:3), using water proofing compound as per manufacturer's instructions, finished even and smooth using extra cement , over and including average 25 mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in padding to give slope to roof or chajja etc, complete all as specified and directed. Note:- Supply only integral water proofing compound will be measured and paid for separately.
Supply only integral water proofing compound, complete all as specified and directed.
Dismantling existing water tanks of size exc 250 Litre but n.exc 500 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘Triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.
Supply and fixing in repair 20 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes complete as specified and directed
Taking up or down existing steel water tubing and connections, 15mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Fixing only, old steel water tubing, 15mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Fixing only, old steel water tubing, 20 mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Supply and fixing galvanized steel water tubes, 15mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fixing galvanized steel water tubes, 20mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and Fixing in repairs 100mm diameter Cast Iron ‘P’ or ‘S’ trap complete all as specified and directed.
Supply and fixing in repairs 100 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts & washers, complete all as specified and directed. Note:- Extra over for lead joints, if ordered, will be measured and paid separately.
Supply and fixing in repairs 75 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts & washers, complete all as specified and directed. Note:- Extra over for lead joints, if ordered, will be measured and paid separately.
Supply and fixing in repairs stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 100 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Supply and fixing salt glazed stoneware gully trap, size 150x100mm, square or round mouthed, type 'P', including set in PCC (1:2:4) bed block and jointed to drains with cement mortar (1:1), fixed as in repairs, complete all as specified and directed.
Supply and fixing in repairs PVC connection 15 mm size of length 600 mm with PTMT nuts, complete all as specified and directed.
Supply and fixing in repairs Vitreous china wash hand basin, coloured, flat back, size 550mm x 400mm, including brackets and cutting for and pinning in ends of brackets or erecting stand, complete including waste coupling of PTMT (half or full threaded) (Minimum weight 32-45 gms), PVC waste pipe, brackets , complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), coloured (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Pedestal pan and trap also including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, seat and cover for pedestal pan taking down old and removal of debris outside MOD land, complete all as specified and directed.
Supply and fixing vitreous china wash down water closet squatt pan, Indian type (Orissa pattern), of size 580mmx440mm, white with integral foot rests (excluding flushing cistern and flushing pipe but including CI ‘P’/’S’ trap), set in & jointed with appropriate adhesive/mortar including embedding in concrete and taking down old and removal of debris outside MOD land, complete all as specified and directed.
Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing in repairs bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed. Make: MARC/ESS ESS/JAINKO/PRAYAG
Supply and fixing in repairs pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia, complete all as specified and directed. Make: MARC/ESS ESS/JAINKO/PRAYAG
Supply and fixing in repairs angle stop valve, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed. Make: MARC/ESS ESS/JAINKO/PRAYAG
Supply and Fixing in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, fancy type with CP arm concealed type with CP cup including fixing to steel pipe or union 15mm bore complete all as specified.
Supply and Fixing in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, wast pipe, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and Fixing, in repairs grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and directed.
Supply and Fixing in repairs Waste coupling of PTMT 32 mm bore dia (half or full threaded) (Minimum weight 32mm-45gms) complete all as specified and directed.
Supply and Fixing in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.
Supply and Fixing in repairs 15mm bore Stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.
Supply and Fixing in repairs 15mm bore Angle Stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.
Supply and fixing in repairs 15 mm ball valves (Minimum weight 142 gms) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.
Supply and fixing in repairs 20 mm ball valves (Minimum weight 210 gms) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.
Supply and Fixing in repairs, PVC kitchen waste coupling with rubber washer, design and pattern as per existing waste couplings with and including 32mm PVC waste pipe heavy duty complete all as specified and directed.
Supply and fixing in repairs flexible 32 mm size PVC waste pipe for Sink/ WHB complete all as specified and directed
Preparation of old plastered or unplastered surfaces of wall by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts trading oil greasy spot etc, rubbing down and stopping of surface using sand paper and applying one coat of oil bound distemper on wall , complete all as specified and directed.
Supply and Fix Glass diving strip, 3mm thick and 38mm wide complete all as specified and directed
Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), as in walls over and including 10mm thick screed bed/bedding layer in CM (1:4) complete all as specified and directed.
Preparation of old plastered/unplastered surfaces of ceiling and brooming down with steel wire brushing, scraping down smoke spots, moss and efflorescent salts, trading oil and greasy spots etc including washing, rubbing down and stopping of surfaces using sand paper and applying one coats of white wash, complete all as specified and directed.
Material and labour for preparation of old decorated wall surfaces by brooming down or steel wire brushing and using sand paper scraping down smoke shoot moulds mass and efflorescent salts and trading oil and greasy spots etc i.e leveling/edging the disturbed places/edges using necessary filling of Birla/JK wall care putty to obtain smooth regular/even finish and applying one coats of Ist quality exterior acrylic emulsion paint over and including one coat of primer, complete all as specified and directed.
Note: The total amount shall subject to adjustment of credit of Rs 34335.00 for old Materials as per Schedule of Credit
M/s SODHI SALES CORPORATION
MS SHREE BALA JEE ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .