CERTAIN INTERNAL MAINT OF VARIOUS OTM ACCN INCLUDING B R WORK AND INTERNAL ELECTRIFICATION AT DIHAR LEH

Amount

Taking down shutters of any description area exc 1.00 Sqm and n. exc 2.00 Sqm each and removing from site complete all as specified and directed.

All as per serial item No 1.00 above but exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 sqm each each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed.

Material and labour for 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid round or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M>S frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and plain colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site as per specified

Supply and fixing for plain framed, panelled shutter (2nd class HW rail and style 35 mm thick, two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated fixing to frame/chowkhat complete all as specified and directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and as directed.

Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and as directed.

Supply and fixing for 100mm aluminum handles cast type anodized complete all as specified and directed.

Material and labour for preparation of wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighting 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

Supply and fixing for anodised aluminium window and ventilator shutters with aluminium grill, side hund type without sash bars aluminium section weighing 0.55Kg/RM including necessary hointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No) complete all as specified

Supply and fixing for anodised aluminium partition fixed type/with out sash bars aluminium section weighing 0.55kg/RM incl necessary jointing cleats, glazing clips rubber packing anodised aluminium snap beading, screw etc complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed.

Supply and fixing ordinary quality sheet glass 5 mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified n exc 0.5 sqm complete all as specified and directed.

Supply and fixing ordinary quality sheet glass 5mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified exc 0.5 sqm complete all as specified and directed.

Material and labour for 9mm thick Prelaminated particle, board, exterior grade, prelaminated both side with both side decorative choice laminations fixed with screws to timber frame work complete all as specified and directed.

Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reinforced complete all as specified and as directed.

Material and labour for Providing, cement concrete type B1 1:2:4 (20mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bedding layer for laying floor finishes complete all as specified and directed.

Material and labour for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in pavement finished even and fair complete all as specified and directed.

Material and labour cement concrete type C2 (1:3:6) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fixing in repair 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests including provision of cement concrete bedding complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including connection to drain or out going pipe etc including making good the floor complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and as directed.

Supply and fixing in repair plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair waste coupling PTMT 32mm bore dia of discharge pipe (half or full threaded, minimum weight of 32mm dia 45gms) complete all as specified and directed.

Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm , including cutting for and pinning in ends of brackets , including 32 mm dia CP waste waste fitting and PVC waste pipe of required length complete all as spcified and directed.

Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed.

Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

Supply and fixing in repair sinks made of stainless steel sheet 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel sheet 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repair grating doome 100mm dia of PTMT complete all as specified and directed.

Supply and fixing in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

Supply and fixing in repairs waste fittings 32mm dia brass CP for glazedware sinks basins etc with long screwed shanks and fly nuts flange end bedded in red lead complete all as specified and as directed.

Supply and fixing in repair aluminium (die cast) body door closer hydraulically regulated designation No.3 universal type suitable for aluminium door shutters of width 851 to 1000mm and of weight between 61 to 80Kg complete all as specified and directed.

Supply and fixing for double action floor spring hydraulically regulated made ou of minium 1.25mm thick aluminium allooy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of MS heavy duty and fixed complete all as specified and directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed.

Material and labour for granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and directed.

Material and labour for granite stone tiles dado 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in CM 1 :4 on stone walls complete all as specified and directed.

Material and labour for machine cut Kota stone slabs flooring 18 to 22 mm thick over 20 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for 18 to 22 mm thick machine cut Kota stone slabs in riser of steps, skirting, dado and pillar laid over 10 mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 300 x 200 x 7mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick rendering in cm 1:4 on stone masonry wall to receive vertical tiles complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/450X350X7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in cm 1:6 on stone masonry wall to receive vertical tiles complete all as specified and directed.

Material and labour for non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed.

Material and labour for Non Skid ceramic dark tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300x300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed.

Material and labour for vitrified Ceramic tiles 10mm thick Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 SQm in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed.

All as per serial item No 56.00 above but in vertical surface such as skirting, dado and risers including 15 mm thick rendering in cm 1:6 on stone masonry wall to receive vertical tiles complete all as specified and directed.

Demolition of stone masonary built in CM including all quoins, arches pillars etc but exceluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for walling of random rubble uncoursed well bonded, bedded & solidly hearted built in CM 1:4 etc complete all as specified and directed.

All as per serial item No 59.00 above but except stone

Material and labour for precast cement concrete block masonary with solid blocks exc 10cm in width type C1, 1:3:6 (using 20mm graded aggregate) in Cm 1:6 complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete

Material and labour for 15mm thick rendering in CM 1:6 to stone wall surfaces finished even and smooth w/o using extra Cement complete all as specified and directed.

Material and labour for 15mm thick rendering in CM 1:4 to stone wall surfaces finished even and smooth w/o using extra Cement

Material and labour for two coats of oil distemper over one coat of chalk whiting incl necessary preparation of new wall surface complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store

Supply and fixing for 15 mm bore steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and directed.

Refixing 15 mm bore old steel tubing and connection in new or old position ( walls, ceilling, floors etc) all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store

Supply and fixing for 20mm bore steel water tubing galvanised, medium grade fixed to walls and ceiling or in floor complete all as specified and directed.

Refixing 20 mm bore old steel tubing and connection in new or old position ( walls, ceilling, floors etc) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified & as directed.

Supply and fixing for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares fixed in repair complete all as specified and as directed.

Disconnecting existing tanks of capacity exceeding 250 ltrs but not exc 500 ltrs, setting aside (or lowering if required) for cleaning etc and hoisting if required reconnecting and hoisting reconnecting and refixing in position complete all as specified and directed.

Disconnecting existing tanks of capacity exceeding 500 ltrs but not exc 1000 ltrs, setting aside (or lowering if required) for cleaning etc and hoisting if required reconnecting and hoisting reconnecting and refixing in position complete all as specified and directed.

Labour only for cleaning and removing all scale and dirt, etc from tanks (capacity exceeding 250 but not exceeding 500 ltrs) and from mouth of circulating pipes etc complete all as specified and directed.

Labour only for cleaning and removing all scale and dirt, etc from tanks (capacity exceeding 500 but not exceeding 1000 ltrs) and from mouth of circulating pipes etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supply and fixing of MS work as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notiching for wire etc, flat iron fillet (for securing wire mash etc) incl all necessary drilling bolting or reveting,etc and similar work complete all as specified and directed.

Material and labour for Fe 290 (Gde E-165) steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) including welding and hanging; also fastening and fixing complete in repairs complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete

Supply and fixing Expanded metal and welded steel wire fabric, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n exc 4 kg per sqm complete all as specified and directed.

Material and labour for preparation of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for 9mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed.

Material and labour for 12mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed.

Material and labour for 18mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed.

Supply and fixing in repairs Harrison rails 20 mm dia mild steel chromium plated curtain rail fixing with brackets stops complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

Supply and fixingin repairs continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs and removal to contractor's store yard, complete all as specified and directed.

Supply and fixing 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removal to contractor's store yard, complete all as specified and directed.

Supply and fixing 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Taking down of aluminium partition including glass and particle board etc complete all as specified and directed.

Supply and fixing in repairs 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repair 32mm bore PVC waste pipe for WHB, Sink etc. complete all as specified and directed.

Supply and fixing in repairs roller blinds consisting of roller tube, fabric rolls, accumalating the fabric in one single linear tube, unlike curtain which hang on the sides of the window fixed in position complete all as specified and directed. Make : Vista, Nova or equivalent.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, pendents / batten holders, bell push, bell, ceiling rose, light fittings etc. complete and removing from site and making good all disturbed surfaces as per existing complete all as specified and as directed.

Material and labour for point wiring one light point controlled by one switch complete with PVC insulated multistandard, single core, 1.5 Sqmm copper conductor with 1.5 Sqm PVC insulated earth continuity copper conductor drawn in and including suitable size of PVC casing capping complete including 3mm thick plastic laminated sheet including of 2mm thick pressed steel terminal sunken box for housing switch socket etc.

All as per serial item No 102.00 above but for one 5 Amp socket point controlled by one 5 Amp switch on same board with other switch/socket complete.

All as per serial item No 102.00 above but for one 5 Amp socket point controlled by one 5 Amp switch on independent board.

All as per serial item No 102.00 but for one bell / buzzer controlled by one push button switch complete all as specified and directed.

All as per serial item No 102.00 here in before but 2.5 Sqmm cable with 1.5 Sqmm earth wire for one 15 Amps socket point controlled by one switch 15 Amps on independent board complete all as specified and as directed.

Supply and fixing in of switch piano type 5 Amps AC, 230V single way .

Supply and fixing socket outlet 2 in 1,3 pin 5 amps flush type 230 Volts.

Supply and fixing of switches P/T 15 Amps, single way, 230V.

Supply and fixing of socket P/T 2 in 1, 3 pin 5 amp and 15 Amps multipurpose flush type, 230V,

Supply and fixing of batten holder, PVC body angular type 230V.

Supply and fixing of bell push flush type 5 Amps 240 Volts complete all as specified and directed.

Supply and fixing of bell AC 230 Volts single phase 240 Volts complete all as specified and directed.

Supply and fixing of ceiling rose, surface bakelite, 65x50mm, three terminals 240 volt complete all as specified and directed.

Supply and fixing in replacement of High efficacy 2'x2' recess LED flat panel with high brightness LED for glare free homogenous illumination with 36W LED 5700K Lamp all as specified. Make:- CG Cat part No.LCPL-36-CDL/TL(2X2) or equivalent model of makes mentioned in PS.

Supply and fixing in replacement of High efficacy 2'x2' recess LED flat panel with high brightness LED for glare free homogenous illumination with 40W LED 4000K Lamp all as specified. Make:- Cromton, Cat part No.LCTAR3N-40-CDL or equivalent model of makes mentioned in PS.

Supply and fixing for LED Recessed mounted square slim and Elegant Down light/panel for indoor light fitting 1x 36 W LED 5700K (1'x4') complete including connector block etc and all accessories prewired and connection with three core copper fixiable cable 16/0.20 mm from ceiling rose to fitting complete all as spd. Make: Cromton, Cat part no.LCPL-36-CDL/TL(1X4)or equivalent model of makes mentioned in PS.

Supply and fixing in replacement of LED Mirror light fitting complete 14 watts with high output diffuser suitable for two feet in lenth complete all as specified and as directed. Make:- Crompton & cat part No. LCL-14-CDL or equivalent model of makes mentioned in PS.

Supply and fixing in replacement prewired LED tube light decoracted box type fitting in any colour with end caps suitable for 4ft ,18/20 Watt LED tube rod all as specified. Make :Crompton catpart No DMLN1LT8-16or equivalent model of makes mentioned in PS. Note :- LED Tube shall be paid and measured seperately.

Supply and fixing in replacement of retro LED Lights 20 watts, 4 feet long energy savings surface mounted luminarie with high efficiency PMMA diffuser gives soft glare free light.complete all as specified . Make :Crompton cat part No. LTT8-20 or equivalent model of makes mentioned in PS.

Supply and fixing in replacement of LED lamp 12 watts, 3000K, energy savings with cool day type, complete all as specified and as directed. Make :- Crompton Cat part no. LED 12W - B22 - WW or equivalent model of makes mentioned in PS.

Supply and fixing in replacement of LED lamp,11 Watt,2 pin,50 c/s,240 V complete all as specified and as directed. Make : Havell'S Cat part No PHCS*#011 or equivalent model of makes mentioned in PS.

Supply and fixing in replacement of sheet metal enclosure distribution board, TPN, 415V, AC 4 way MCB DB double door complete inclusive complete all as specified and as directed.

Supply and fixing in replacement of 8 way SPN DB double door type Suitable for surface and flush mounting. IP 43 with metal doorcomplete all as specified and as directed.

All as per serial item No 124.00 above but 12 way complete all as specified and as directed. Make :- ABB & Catpart No. E-SHCM10 or equivalent model of makes mentioned in PS.

Supply and fixing in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as directed.

Supply and fixing in replacement of MCBs, SP 6 to 32 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed.

Supply and fixing in replacement of MCBs, SPN 40 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed. Make:- ABB & code No. SH201M-C40 or equivalent model of makes mentioned in PS.

All as per serial item No 128.00 above but SPN 63 Amps complete all as specified and as directed. Make:- ABB & code No. SH201M-C63 NA or equivalent model of makes mentioned in PS.

All as per serial item No 128.00 above but Triple Pole 63 Amps complete all as specified and as directed.

All as per serial item No 128.00 above but Triple Pole & Neutral 63 Amps complete all as specified and as directed.

Material and labour in replacement submain wiring complete with two runs of PVC insulated multistranded single core 4 Sqmm copper conductor with 2.5 Sqmm earth continuity copper conductor drawn in & inclusive PVC conduit 25mm dia (Note: Two runs of 4 Sqmm & one run of 2.5 sqmm conductor with 1 run of PVC conduit shall be measured as 1 single length ).complete all as specified and as directed.

All as per serial item No 132.00 but two runs of 6 sqmm single core copper conductor with one runs of 4 sqmm earth continuity copper conductor. complete all as specified and as directed.

Supply and fixing in replacement of LED building security light 1X25 Watt,pressure die cast aluminium housing,heat resistance toughened glass with frame and IP 66 protection for better optics for uniform distribution and connection with three core copper flexiable cable 16/0.20 mm from ceiling rose to fitting complete all as spd . Make. CG,Cat part no.LSTS-25-CD or equivalent model of makes mentioned in PS.

Comprehensive maint of exhaust fan 200mm/ 225mm/300mm/450mm sweep and carrying out the following task at different location of DIHAR Leh :-(a) Taking down the existing fan, dismantling the blade and cleaning its body and blades (b) Cleaning of base frame and outer louvers of exhaust fan. (c) Checking the foundation bolts, base frame of the exhaust fan. (d) Greasing of the exhaust fan (e) Check and correct earth continuity for its functioning (f) Fixing back the exhaust fan to its original location after testing.

Rewinding of exhaust fan 200mm/225mm sweep, AC 230 V, single phase with super enameled copper winding wire of appropriate size incl packing, insulating material, soldering, varnishing , assembling and testing complete all as specified.

All as per serial item No 136.00 above but of 300mm sweep.

All as per serial item No 136.00 above but of 450mm sweep.

Supply and fixing in replacement ball bearing suitable for exhaust fan 200mm/225mm to 450 mm sweep all as specified and as directed. Make of bearing NBC/SKF

Supply and fixing in replacement gun metal bush suitable for exhaust fan 200mm/225 to 450 mm sweep.

Supply and fixing in replacement capacitor 2.5/3.15 MFD ISI mark .

All as per serial item No 141.00 above but of 4 MFD.

Material and labour for Spray painting after cleaning and filling of cavities for exhaust fan of 200mm/225mm/300mm/400mm sweep, single phase, 230 V complete with synthetic enameled paint of existing colour all as specified and as directed.

Comprehensive maintenance of storage type electric water heater (geyser) of capacity 50 Ltrs and carrying out the following task at different location of DIHAR Leh.all as specified and as directed. (a) Taking down the geysers dismantling, de-scaling , brushing and cleaning of the storage tank (b) Examining the water tightness of storage tank after cleaning (c) Checking out operation of all stop cocks and bib cocks (d) Replacing washer and gland of stop/bib cocks to ensure proper tightness (e) Check and correct earth continuity for its functioning (f) Check maintain and refit thermostat and test is functioning (g) visual examination of fusible plug (h) De-scaling of heating elements and testing before fitting (j) Replacement/ repair of neon lamp indicator (k) Fixing back the geyser to its original location after testing

All as per serial item No 144.00 above but of capacity 25 liters.

Supply and fixing in replacement heating element 1.5 KW ISI marked including rubber Gasket complete all as specified and directed.

All as per serial item No 146.00 above but of capacity 2 KW.

Supply and fixing in replacement thermostat ISI marked for Geyser of capacity 50/25 liters all as specified and as directed.

Supply and fixing in replacement PVC reinforced breaded armored connecting pipe 600mm long with two brass adopter and fixing in position.all as specified and as directed.

Supply and fixing in replacement plug top 3 pin 15 Amps ISI mark all as specified and as directed.

Supply and fixing in replacement PVC sheathed copper cable 3 core of size 2.5 Sqmm 230 V ISI Mark.

Supply and fixing in replacement of geyser steel tank complete with geyser assemblly ISI marked for 50 Ltr capacity. all as specified and as directed.

Supply and fixing in replacement of geyser steel tank complete with geyser assemblly ISI marked for 25 Ltr capacity. all as specified and as directed.

Supply and fixing in repair of PVC insulated single core copper cable of size 1.5 Sqmm 230 Volts complete. Make;Havell's, Cat part no.WHFFFN 11X5 or equivalent model of makes mentioned in PS.

Supply and fixing in repair of PVC insulated single core copper cable of size 2.5 Sqmm 230 Volts complete. Make;Havell's, Cat part No WHFFFN…A12X5or equivalent model of makes mentioned in PS.

Supply and fixing in repair of PVC insulated single core copper cable of size 4 Sqmm 230 Volts complete. Make;Havell's, Cat part no.WHFFFN…A14X0 or equivalent model of makes mentioned in PS.

Taking down old unservicable any types of switches/sockets/batten holders/bells ect. complete and removing from site and making good all disturbed surfaces as per existing complete all as specified and as directed.

Supply and fixing in repair of switch piano type 5 Amps AC, 230V single way.

Supply and fixing in repair of bell push flush type 5 Amps 240 Volts complete all as specified and directed.

Supply and fixing in repair of socket outlet 2 in 1,3 pin 5 amps flush type 230 Volts

Supply and fixing in repair of switches P/T 15 Amps, single way, 230V

Supply and fixing in repair of Switch socket combination 2 in 1, 5 pin, 5 /15 Amps multipurpose type, 230V,

Supply and fixing in replacement of batten holder, PVC body angular type 230V,

Supply and fixing in repair of ceiling rose, surface bakelite, 65x50mm, three terminals 240 volt complete all as specified and directed.

Supply and fixing in repair of bell AC 230 Volts single phase 240 Volts complete all as specified and directed.

Supply and fixing in repair of switch/socket with box (02 hole) 2 in 1, 5 pin 5/15 Amps multipurpose flush type, 230V,

Material and labour for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) connected to GI wire 4 Sqmm by means of GI bolts, nuts, check nuts and washer etc , to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR 2009 Part I other end conneted to panesls, laid under floors/plints or fixed on walls or concealed in wall etc with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate including PCC chamber in cement concrete 1:3:6type C-1 and finished even and smoothe without using extra cement MS angle iron frame, cast iron cover with loaking arrangement with GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement. GI pipe medium grade 15 mm bore for protection of GI wire, necessary excavaion and earth work in any type of soil/strata & testing complete all as specified and directed by Engineer-in-Charge.

M/S SK TRADERS

national engineering

M/S SHAH AND SHAH CONSTRUCTION