Re-tender for Special repair work at JNV Sambalpur (Odisha)

Grand Total (Sch+NS) ₹2,54,77,586.41

Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene)

modified Polymeric memberane overroof consisting of first coat of bitumen primer @ 0.40 litre per

sqm,2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shallconsist of blown type bitumen of

grade 85/25 conforming to IS : 702,3rd layer of roofing membrane APP modified Polymeric

membrane2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layersprefabricated with centre core

1 as 100 micron HMHDPE filmsandwiched on both sides with polymeric mix and the polymeric mixis SQM 9751.34 ₹ 517.68 ₹ 50,48,119.03

protected on both side with 20 micron HMHDPE film. 5th, the topmost layer shall be finished with brick

tiles of class designation 10grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with2%

integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1

cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

2 Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per

drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base

members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The

material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall

3 to corner application, both new and existing construction in office Buildings & complexes with no

slipping down tendency amongst the components of the Joint System. The Joint System shall utilize

light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap

locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).

Wall Joint of 100 mm gap Metre 86 ₹ 5,162.40 ₹ 4,43,966.18

Providing and fixing of expansion joint system of approved make and manufactures for various roof

locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded

aluminum base members with, self aligning and self centering arragement support plates asper ASTM

B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover

expansion control system that is capable of accommodating multidirectional seismic movement without

stress to its components. System shall consist of metal profile that incorporates a universal aluminum

base member designed to accommodate various project conditions and roof treatments. The cover

plate shall be designed of width and thickness required to satisfy movement and loading requirements

4 and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement

that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere

ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of

movement and flexure in all directions including vertical displacement. The Joint System shall resists

damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and

occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint

System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063).

5 Roof Joint of 100 mm gap Metre 86 ₹ 5,824.09 ₹ 5,00,871.40

Electrical Works

Digitally signed by JAYA

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC

insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with

6 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR

PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core

8 cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC Meter 1000 ₹ 362.93 ₹ 3,62,929.00

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core

9 cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS/HFFR PVC Meter 50 ₹ 571.15 ₹ 28,557.55

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC

10 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as ₹ - ₹ -

16 2 X 16 sq. mm + 1 X 6 sq. mm earth wire Meter 100 ₹ 809.54 ₹ 80,953.60

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

17 surface/recess including cutting the wall and making good the same in case of recessed conduit as ₹ - ₹ -

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

21 3 pin 5/6 A socket outlet Each 36 ₹ 132.33 ₹ 4,763.81

22 6 pin 15/16 A socket outlet Each 38 ₹ 213.09 ₹ 8,097.31

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate

24 switch box including connections but excluding modular plate etc. as required. Each 10 ₹ 391.15 ₹ 3,911.46

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for

modular switches in recess etc. as required.

Digitally signed by JAYA

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

40 recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Each 50 ₹ 530.29 ₹ 26,514.25

connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

41 recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Each 50 ₹ 641.21 ₹ 32,060.35

modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including

connections etc. as required.

43 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Each 10 ₹ 108.98 ₹ 1,089.76

Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard

44 length (upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable Each 50 ₹ 258.82 ₹ 12,940.90

etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240

V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Digitally signed by JAYA

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable

56 for inductive load of following poles in the existing MCB DB complete with connections, testing and ₹ - -

commissioning etc. as required.

58 Single pole and neutral Each 2 ₹ 625.64 ₹ 1,251.28

61 Triple pole and neutral Each 5 ₹ 1,265.87 ₹ 6,329.37

Supplying and fixing following rating, Double pole, 240 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, Four pole, 415 V, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, Double pole, (single phase and neutral), 240 volts, residual

69 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete ₹ - ₹ -

with connections, testing and commissioning etc. as required

Supplying and fixing following rating, Four pole, (three phase and neutral), 415 volts, residual

73 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete ₹ - ₹ -

with connections, testing and commissioning etc. as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal

enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and complete with connections, testing and

commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2

78 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on Each 3 ₹ 306.50 ₹ 919.49

front side as required.

79 Hot Dipped Galvanized Iron Cable Tray ₹ - ₹ -

Digitally signed by JAYA

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

80 convenient sections, joined with connectors, suspended from the ceiling with two numbers GI ₹ - ₹ -

Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required.

81 100 mm width X 50 mm depth X 1.6 mm thickness Meter 50 ₹ 733.64 ₹ 36,682.10

82 150 mm width X 50 mm depth X 1.6 mm thickness Meter 30 ₹ 781.32 ₹ 23,439.57

83 225 mm width X 50 mm depth X 1.6 mm thickness Meter 20 ₹ 964.24 ₹ 19,284.86

84 EARTHING ₹ - ₹ -

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing

85 masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Set 20 ₹ 7,451.23 ₹ 1,49,024.68

charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

86 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long Set 6 ₹ 8,125.52 ₹ 48,753.14

etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth

electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,

including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall

be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

89 LIGHTNING CONDUCTOR ₹ - ₹ -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having

90 single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as Each 4 ₹ 592.56 ₹ 2,370.23

Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic

object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning

conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning

conductor complete as required.(For vertical run)

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor

complete as required.(For horizontal run)

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor

complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of

G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

100 LED LIGHT AND FAN ₹ - ₹ -

Digitally signed by JAYA

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )

Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/

square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal

surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI

>80,UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver &

electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour

Matching) <3, Maximum power consumption should not more than the specified rating and Fixture

shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5

sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required

with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 &

LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size

and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management:

heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

Powder coated die cast /Extruded aluminium Body including trim

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C,

internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20,

CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,

Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained

till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K

(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c

external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable

and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120

lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not

rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Digitally signed by JAYA

LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).

Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following

body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement

with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp

range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <

10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver &

electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour

Matching) <3, Maximum power consumption should not more than the specified rating and Fixture

107 shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen ₹ - ₹ -

printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC

insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all

testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as

approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of

aluminium housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy

≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure

die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input

voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge

protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-

2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI EMC As per CISPR -

15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project

requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of

minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80

111 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM ₹ - ₹ -

(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120

lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not

rise above 90°C)

Digitally signed by JAYA

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120

Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast

aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%,

Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50

0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as

per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-

EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project

requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000

Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-

115 21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation ₹ - ₹ -

Color Matching) <5, Maximum power consumption should not more than the specified rating and

Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq

mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80

Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT

shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of

aluminium housing such that LED junction temperature shall not rise above 90°C)

119 Solar outdoor LED light ₹ - ₹ -

Digitally signed by JAYA

Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on

the existing pole structure, comprising of 30 watt, 6V Mono Passivated Emitter and Rear Contact

(PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point

tracking (MPPT) charge Controller in the box with a sleek appearance and a sturdy structure, is

weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4), charging

time 8-10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt, Input voltage:

12V DC , Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC

61000-4-5, Driver efficiency >85%, IP-66,IK-08, CRI >70 , under voltage and over voltage protection,

Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPER 15 A, lenses

for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per

the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K (As

per American National Standard Institute (ANSI Bin)) , life time (LED,Driver & electrical circuitary) of

120 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES Nos. 6 ₹ 22,476.30 ₹ 1,34,857.80

TM-21-11 report, automatic swich on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body),

can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test

report and all testing required for LED fixtures as per BIS shall be submitted.. All as per pre approved

by Engineer in-charge complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR,

PVC insulated copper conductor single core cable and earthing etc. as required, complete with

mounting structure for the battery and accessories suitable for withstand wind storm speed as per

the site location. (Thermal management: heat sink of aluminium housing such that LED junction

temperature shall not rise above 90°C).

30 Watt (System lumen efficacy >120 lm/Watt)

Brush Less Direct Current (BLDC) Fan without Remote

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos.

canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9,

Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total

Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all

remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.),

insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply,

Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC

insulated copper conductor single core cable and earthing etc. as required.

122 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 75 ₹ 2,622.24 ₹ 1,96,667.63

123 MV CABLE LAYING ₹ - ₹ -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

124 following size direct in ground including excavation, sand cushioning, protective covering and ₹ - ₹ -

refilling the trench etc as required.

126 Above 35 sq. mm and upto 95 sq. mm Metre 1600 ₹ 462.18 ₹ 7,39,480.00

127 Above 95 sq. mm and upto 185 sq. mm Metre 300 ₹ 483.58 ₹ 1,45,074.30

Digitally signed by JAYA

128 Above 185 sq. mm and upto 400 sq. mm Metre 200 ₹ 548.77 ₹ 1,09,754.40

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade

of following size direct in ground in the same trench in one tier horizontal formation including

excavation, sand cushioning, protective covering and refilling the trench etc as required.

131 Above 35 sq. mm and upto 95 sq. mm Metre 100 ₹ 325.96 ₹ 32,595.50

132 Above 95 sq. mm and upto 185 sq. mm Metre 50 ₹ 347.36 ₹ 17,368.05

133 Above 185 sq. mm and upto 400 sq. mm Metre 20 ₹ 411.58 ₹ 8,231.58

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL pipe as required.

136 Above 35 sq. mm and upto 95 sq. mm Metre 60 ₹ 70.06 ₹ 4,203.36

137 Above 95 sq. mm and upto 185 sq. mm Metre 40 ₹ 94.38 ₹ 3,775.24

138 Above 185 sq. mm and upto 400 sq. mm Metre 20 ₹ 165.41 ₹ 3,308.20

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade

of following size on cable tray as required.

140 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 200 ₹ 51.57 ₹ 10,313.80

141 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Metre 100 ₹ 106.06 ₹ 10,605.70

142 Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) Metre 150 ₹ 134.27 ₹ 20,141.10

143 Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) Metre 100 ₹ 219.90 ₹ 21,989.80

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm

at the top with a thickness of 10cm including inscription duly engraved as required.

145 MV CABLE JOINTING & END TERMINATION ₹ - ₹ -

Supplying and making end termination with brass compression gland and aluminium lugs for

146 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade ₹ - ₹ -

159 MISC. ITEMS ₹ - ₹ -

Digitally signed by JAYA

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC

160 collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and ₹ - ₹ -

refilling etc as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like

socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing

163 etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but ₹ - ₹ -

excluding sand cushioning and protective covering etc., complete as required.

164 63 mm dia (OD-63 mm & ID-51 mm nominal) Meter 100 ₹ 281.20 ₹ 28,119.70

165 90 mm dia (OD-90 mm & ID-76 mm nominal) Meter 80 ₹ 326.93 ₹ 26,154.24

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with

166 all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of ₹ - ₹ -

11 KV grade as required

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with

168 all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of ₹ - ₹ -

11 KV grade as required

Dismentaling and buyback of dismanlted material of existing 0.433 kV 3 phase 4 wire line-500 mtr

and 100 KVA Transformer along with accessories

172 100 KVA 11/.04 kV (AL) Transformer, BIS, EL-II No. 1 ₹ 4,865.00 ₹ 4,865.00

173 Distribution box for 100 kVA 11/0.4 KV Transformer No. 1 ₹ 973.00 ₹ 973.00

174 Lightening Arrester (12 kV, 5kA) Station class No. 3 ₹ 194.60 ₹ 583.80

177 28 sqmm 4 nos OH bare conduction along with insulator. Kms 0.7 ₹ 486.50 ₹ 340.55

178 Construction of 250 kVA 11/0.4kV Plinth Mounted Substation ₹ -

Supply of all materials, labour and construction of 3ph 3w 11-KV overhead line from tapping point of

TPCODL with 9mtr long 100x116mm RS Joist pole ( 200 ISMB) ,80 sqmm AAAC conductor complete

with required insulators, cross arms, stays, struts, guarding complete as per site requirement and

direction of Engineer-in-charge. average span 60mtr. ₹ 1,00,680.79

Construction of 11KV DP Structure with 2nos 9 mtr long 150x150mm RS joist pole with Cross arm

bracings of 75X 40mm MS Channels , clamps , insulators, 12KV Lightning Arrestors, 400A AB switch ,

180 Earthing Switch , 400A HG Fuse , Guy Sets , Danger Boards , Painting with 2 coats of red oxide primer Nos 1 ₹ 3,79,016.10

& 2 coats of aluminium paint , accessories , fittings, hardwares etc. as required with Trivector Meter

complete with C.T & P.T along with T.P Box . ₹ 3,79,016.10

Supply, Installation Testing and commissioning of LT Distribution Box with Change over for two

181 incomer, MCCB, Aluminium Bus bar of single bay with kit-Kat fuse for 250 kVA transformer complete in No. 1 ₹ 63,266.89

all respect as per NIQ and as direction of NBCC/TPNODL ₹ 63,266.89

182 Sub-station Fencing with Metal spreading Ls 1 ₹ 24,789.61 ₹ 24,789.61

183 11/0.433 KV Transformer ₹ -

Digitally signed by JAYA

Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 4

Star rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV

step down, 3 Phase, 50 Hz, Dyn 11 vector group, KNAN [K(K-Class insulating liquid) Natural Air

Natural] copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade

Cold Rolled Grain Oriented (CRGO) Core grade MOH or better),Dielectric material shall be type -A,

suitable for out door/indoor applications with Offload Tap Changer/ On Load Tap Changer (OLTC) (

below 500 KVA offload and above 500 KVA On Load Tap Changer) on HV side having AVR relay and

Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation

of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in

steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sq.mm XLPE cable of 11 KV

grade, including bus trunking arrangement on LV side including supplying and laying of copper

conductor multicore control cable from transformer to HT breaker/panel for safety tripping,

complete with all accessories and safety provisions as per relevant IS 1180 (Part-3) including first

184 filling of filtered dehydrated Synthetic organic Ester oil, i/c supplying and grouting of suitable M.S. ₹ -

Channel with all accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS :

1180 (Part-3) and as per CPWD specifications complete in all respects etc as

required at site. The maximum flux density in any part of the core and yoke at rated voltage and

frequency shall be such that the flux density with +12.5 percent combined voltage and frequency

variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-

rise shall not exceed 40 0C for oil and 45 0C for winding up to 200 KVA and 45 0C for oil and 50 0C for

winding for above 200 KVA. Inside of tank shall be painted with varnish or liquid resistant paint. For

external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by

two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred for paint

thickness for normal to medium corrosive atmosphere. For highly polluted atmosphere and special

application external paint work shall be as per direction of Engineer-in-Charge. Design ambient

condition : a) air temperature 50 0C, b) Relative Humidity 90 % Max, c) Seismic Zone as per location

of site, d) Altitude as per location/site. Noise level Shall not exceed limits as per NEMA TR-1 with all

accessories running measured as per IEC 551 / NEMA standard. The transformer should have QR

Digitally signed by JAYA

Fitting and Accessories : The following fittings shall be provided:- a) Two earthing terminals with the

earthing symbol b) Oil level gauge indicating oil level at minimum, 30°C and maximum operating

temperature; c) Air release device (for non-sealed type transformers) d) Rating and terminal marking

plates; e) Silica gel breather f) Drain-cum-sampling valve (¾″ nominal size thread, IS 554) preferably

steel with plug for three phase transformers; g) Thermometer pocket with cap; h) Oil filling holes

having (1¼″ nominal size thread) with cover (for sealed type transformers without conservator); i)

Lifting lugs for the complete transformer as well as for core and winding assembly; j) Pressure relief

device or explosion vent above 200 kVA; k) One filter valve on the upper side of the tank (for

transformers above 200 kVA); l) Unidirectional flat rollers (for transformers above 200 kVA); m)

Inspection hole (for transformers above 200 kVA); n) HV side neutral grounding strip (where one of

the HV bushing terminal is connected to earth); o) Buchholz relay for transformers above 800 kVA. p)

Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oil

temperature indicator and winding temperature indicators for transformers above 200 kVA with

suitable tripping mechanism above permissible limit s) Jacking pads (for transformer above 1 600

kVA); t) Additional Neutral separately brought out on bushing for earthing. u) Magnetic oil level

gauge (for transformer above 1600 kVA) with low oil level alarm contact; v) Non return valve (for

conducting pressure test); w) Pressure relief device or explosion vent x). Monogram Plate y)

Inspection cover z). Detachable type radiators with top and bottom shutoff valve. aa) Oil Conservator

with Oil level indicator, minimum level marking and drain plug for all transformers of capacity 50 KVA

and above. bb) Necessary hardware, clamps, lugs etc. for termination on HV/MV etc. for all

188 Construction of 0.433 kV 3 Ph 4 W line -1 Km and Miscellenious works ₹ -

Supply, delivery and installation of 9 mtr long 150x150 mm Rs Joist (34.6 kg/Mtr) SILA, JINDAL, TATA

make including excavation of Pole pit in all kinds of soil, providing bas pad of of 150 mm thick at the

189 bottom of the pit with PCC 1:2:4 and concreting of RS Joist Pole (1.8 mtr X 0.5 Mtr X 0.5 mtr=0.45 cum- No. 20 ₹ 43,785.00

with coping) complete in all respect as per NIQ and as direction of NBCC/TPNODL

Supply and fixing of 11 kV Pin Insulator polymer complete in all respect as per NIQ and as direction of

Supply and fixing of Pressure Channel 100x50x6 mm MS Channel each 1 mtr long including clamp,

191 waser and nut & bolt complete in all respect as per NIQ and as direction of NBCC/TPNODL Kg. 120 ₹ 140.11

Supply and fixing of HT stay set complete for O.H. line complete in all respect as per NIQ and as

direction of NBCC/TPNODL and site Engineer instruction with following materials.

i) HT Stay Set (complete) Set 15 ₹ 2,262.23 ₹33,933.38

ii) HT stay Insulator No. 15 ₹ 108.00 ₹1,620.05

iii) HT Stay Clamp Pair 15 ₹ 267.58 ₹4,013.63

Supply & stringing of 240 Sqmm, 4 core A2Xfy Aluminium Xlpe Insulated Armoured Str Cable 1.1 Kv

193 rating for Over Head line including jumpering, fixing of clamps etc. complete in all respect as per NIQ Mtr. 1000 ₹ 2,374.12

and as direction of NBCC/TPNODL ₹23,74,120.00

194 Supply and painting with Red-oxide paint to the poles and cross arms Ltr 7 ₹ 340.55 ₹2,383.85

Digitally signed by JAYA

195 Supply and painting with all paint. Ltr 38 ₹ 408.66 ₹15,529.08

196 Supply and painting with Black paint to the poles. Ltr 38 ₹ 428.12 ₹16,268.56

Supply and fixing of all materials of GI Nut, Bolt & washer of different sizes for Structure for OH Lines

complete in all respect as per NIQ and as direction of NBCC/TPNODL

SITC of IP 65/66 Junction box on Pole including , aluminium bus bar, Clamp nut bolt complete ars per

Supply of 4 core 120 sq mm alumium armoured PVC insulated and PVC seathed / XLPE power cable

199 of 1.1 KV grade of following sizes of cable as required. mtr 300 ₹ 875.70

Supply of 4 core 95 sq mm alumium armoured PVC insulated and PVC seathed / XLPE power cable

200 of 1.1 KV grade of following sizes of cable as required. mtr 900 ₹ 700.56

Supply of 4 core 70 sq mm alumium armoured PVC insulated and PVC seathed / XLPE power cable

201 of 1.1 KV grade of following sizes of cable as required. mtr 700 ₹ 661.64

Supply of 4 core 25 sq mm alumium armoured PVC insulated and PVC seathed / XLPE power cable

202 of 1.1 KV grade of following sizes of cable as required. mtr 1000 ₹ 330.82

Supply of 3 core 16 sq mm alumium armoured PVC insulated and PVC seathed / XLPE power cable

203 of 1.1 KV grade of following sizes of cable as required. mtr 300 ₹ 296.77

Supply of 3 core 10 sq mm alumium armoured PVC insulated and PVC seathed / XLPE power cable

204 of 1.1 KV grade of following sizes of cable as required. mtr 100 ₹ 277.31

Supply of all materials with labour for concreting of pole pits and stay pits with cooping of poles

complete in all respect as per NIQ and as direction of NBCC/TPNODL

i) Material cost for concreting of stay (1.65 MTR x 0.3 mtr x 0.3 mtr= 0.1485 cum - PCC 1:2:4) No. 15 ₹ 1,197.76 ₹17,966.45

Material cost for concreting of RS Joist Pole (1.8 MTR x 0.5 mtr x 0.5 mtr= 0.45 cum - PCC 1:2:4)

206 SITC of 10 W natural White Balard Light No. 40 ₹ 5,448.80 ₹2,17,952.00

207 SITC of IP 56 Distributiojn panel having 150 amp 4 Pole MCCB and alluminium Bus bar. No. 3 ₹ 77,840.00 ₹2,33,520.00

208 SITC of IP 56 Distributiojn panel having 120 amp 4 Pole MCCB and alluminium Bus bar. No. 5 ₹ 70,056.00 ₹3,50,280.00

209 SITC of IP 56 Distributiojn panel having 100 amp 4 Pole MCCB and alluminium Bus bar. No. 3 ₹ 66,164.00 ₹1,98,492.00

Total Electrical Works ₹ 76,25,084.78 ₹69,25,782.96

Digitally signed by JAYA