CAMOUFLAGE AND EXTERNAL PAINTING IN ZONE B IN DOMESTIC AREA AND REPAIRS TO SOIL WASTE/VENT PIPES, CLEANING OF SEWAGE LINE, MANHOLE, SEPTIC TANK AND SOAKAGE WELLS AND MISC ITEMS IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of drain pipes, or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil all as specified and directed by Engr - in - charge. Note : (i) The quoted rate of excavation is inclusive of clearing any type of vegetation and shrubs manually by employing labour or mechanically using JCB at the site of drain and for laying sewage line. (ii) The quoted rate is inclusive of clearing any type of vegetation, shrubs, brushwood, roots, tree trunks, etc in approach area for site of excavation manually by employing labour or mechanically using JCB. (iii) The damaged water pipe lines and electric cables during excavation shall be repaired by the Contractor. The quoted rate is inclusive of repair and making good of damaged water pipe lines and electric cables.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and directed by Engr - in - charge.

Removing excavated material nexc 50mtr and depositing where directed at a level n exc 1.5m above the starting point

M&L for Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth in the approach to the site of cleaning sewage lines, manholes, gully traps,etc. manually by employing labour or mechanically using JCB and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance. Note : The damaged water pipe lines and electric cables during clearing of vegetation shall be repaired by the Contractor. The quoted rate is inclusive of repair and making good of damaged water pipe lines and electric cables.

Demolation and breaking up drain pipes of 150 mm dia (Salt glazed ware ,AC or Reinforced concrete ) set in cement mortar including bedding haunching complete all as specified and directed by Engineer-in-Charge

M&L in replacement of 150mm bore pipe reinforced concrete, class NP2, laid and jointed complete with collars complete all as specified & as directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete.

Demolition of stone/brick masonry built in cement mortar including coping etc all as specified and directed by Engr - in - charge.

M&L Pre-cast cement concrete block masonry with solid blocks, type C-1 1:3:6 (using 20mm stone aggregate) exc. 10cm in width and setting in mortar, incl dismantling of damage/extg wall complete all as spd and dir.

M&L for (Stone Masonry with Jaisalmer stone or Jodhpur Stone) Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6.

Taking down cement plaster of any discription on any surfaces, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10mm thick plaster in cement mortar (1:3 ) on concrete surfaces or masonry surfaces as in manholes,gully traps, etc and finished even and smooth without using extra cement complete all as specified.

M&L for 10mm thick plaster in cement mortar (1:4 ) on concrete surfaces or masonry surfaces, finished even and smooth without using extra cement complete all as specified.

Demolition of cement concrete in any position not otherwise specifically provided complete all as specified.

M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete including necessary formwork, all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) in coping, benching of manholes etc, and including necessary formwork and including demolition of existing PCC complete all as specified and directed by Engr - in - charge.

M & L pre-cast RCC 1 : 2 : 4, type B-1 (using 20 mm graded stone aggregate) in cover slabs for man holes etc, set in CM I : 6 and including demolition of old slabs complete all as specified and directed by Engr - in - charge.

M&L MS TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed by Engr - in - charge.

S&F Providing SFRC manhole covers with rectangular frame of size 44"x26" MD-10 fixed at site up to satisfactoin of Engr-in-Charge and including dismentling of old manhole cover slab complete all as specified.

S&F Providing SFRC manhole covers with square frame of size 600mm X 600mm fixed at site up to satisfactoin of Engr-in-Charge and including dismentling of old manhole cover slab complete all as specified.

M&L for Jaisalmer Stone Patti, of thickness from 50mm to75mm Thick of size from 500mm X 500mm to 1200mm X 1200mm as required at site including making hole of appropriate size of PVC pipes or CI pipes, all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement motar 1:6 complete)

De-watering of septic tanks/soakage wells/Grease trap of any size and any depth by pumping with trolley mounted pump sets including carrying the waste water in closed containers and unloading it out side the MoD land at a distance n. exc 5 km from the starting point. septic tanks/soakage wells/grease trap of any size/depth complete all as specified and as directed by the Engr-in-Charge\nNote:-\n(i) Hydraulically driven high pressure pump, capacity of 295L/min at 135 bar.\n(ii) Hydraulically driven high pressure pump, having 1850 cum/hr Suction Pressure.\n(iii) Rear hydraulic driven hose reel with 120m jetting hose.\n(iv) Proper safety of the operator during operation.\n(v) Rate shall be deemed to included in quoted rate.

M&L for removal of blockage in between WC and nahani trap/WC to Ist manhole / floor trap to nahani trap etc. by flexible roding and removal the all dirt up to a distance of 100 m all as directed.Note : (i) In case a blockage reoccured with in 7 days the same shall be removed without any extra cost of the Govt. (ii) Cleaning of line in between manhole where in the blockage remove shall deemed to incl the rate coated. (iii) If contractor failed to clear the blockage with in 24 hours from the receipt of complaint, a penalty of Rs 50 per day will charge up to 7 days and after 7 days same will be Rs 100.00 till completion of complaint.

Cleaning and desilting of manholes of any size,depth not exc 1.50 mtr by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Cleaning and desilting of manholes of any size,depth exc 1.5 mtr but not exc 3.0mtr by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Cleaning and desilting of manholes of any size,depth exc 3.0 mtr but not exc 4.5 mtr by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Cleaning solid /liquid mud deposited in under ground sewage lines, upto and including 150mm dia bore, of any type, between consecutive manholes, by hydraulic jet pressure machine, through connecting manholes, complete men, machine and water as required , including removal and refixing of manhole covers, complete all as specified and directed

Cleaning solid /liquid mud deposited in under ground sewage lines, upto and including 200/300mm dia bore, of any type, between consecutive manholes, by super sucktion machine, through connecting manholes, complete men, machine and water as required , including removal and refixing of manhole covers, complete all as specified and directed

S&F in repair water closet squatting pan 'Orissa Pattern'of size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including P' or 'S' trap complete incl. jointing and provision of PCC 1:5:10 bed as in repairs.

S&F repairs Vitreous china wash down water closet pan (pedestal pattern) including any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

S&F glazed ceramic colour tiles 450X 300X 6-7mm thick on vertical surface such as skirting, dado, set and joint in neat cement slurry and pointed in white/coloured cement to match with existing surface make complete all specified and directed by Engr-in Charge.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls & floor

S&Fin Repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls & floor

S&F in Repairs Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe.

S&F in Repairs Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia pipe.

S&F in Repair 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified & directed.

S&F in repair 110 mm dia PVC (SWR) bend any radius .

S&F in repair 75mm dia PVC (SWR) bend any radius with access door .

S&F in repair 75 mm PVC (SWR) Junction single (Single T) equal or unequal with access door .

S&F in repair 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door

S&F in repair 110mm dia PVC (SWR) vent cowl .

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :- (i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighing not less than 3.50 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. (iii) 40mm bore GI pipe for spout pipe length 0.75m (iv) The rate is inclusive of demolition of tile, demolition of RCC/PCC and taking out floor trap/ Nahani Trap and doing sunken treatment as described above.

Lime concrete with stone agg in lime mortar 1:2 as filling in sunken floor as in any situation complete all as spd and dir.

Cement concrete (50mm thick) type B-1, 1:2:4 (20mm graded aggregate) as in floor cpmplete all as spd and dir

Taking up or down mild steel tubing and connections 15 mm bore complete all as specified and directed.

S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

S&F (Fixed in repair) vitreous china wash down water closet pan (Padestral pattern) with and including waste fitting, waste pipe, flushing cistern and seat cover etc. FIXED IN REPAIRS, complete all as specified (complete set and fitting) JAQUAR Cat No SLS – WHT-6851S110PP

S & F in repair coloured TABLE TOP wash hand basin with built up with cabinet with cp pillar mixture incl mirror Make Jaquar Cat No SLS-WHT-6901 or equivalent with stainless steel brackets all as specified & directed.

M & L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick or concrete surfaces or stone masonry surfaces of wall, finished even and smooth w/o using extra cement complete.

M&L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces or stone masonry surfaces of wall, finished even and smooth w/o using extra cementcomplete.

Demolition of cement concrete (reinforced) in roofs, platforms, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M & L for reinforced cement concrete type B-0, 1:2:4 (using 12.5 graded granite stone aggr) in Chajjas,column,beam, facia, staircase etc Complete all as spd and dir.

M&L for providing Micro concrete with MICROCRETE in Chajjas,column,beam, facia, staircase etc at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc all as specified and directed. Make: CICO MICROCRETE of CICO Technologies ltd or equivalent in Fosroc/STP/BASF

Rough finished flat form wok to Chajjas ,column,beam, facia, staircase, Chullah hoods, water troughs andsimilar items incl sdges and formwork incl necessary struts,scaffolding etc complete all as spd and dir by Engr-in-charge.

M & L Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and fair without using extra cement complete all as specified and directed by Engr-in-charge.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as spd and dir.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by Engr-in-charge.

M & L for prepariation of new plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls.

M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by Engr-in-charge.

M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying two coats of cement base paint (tinted) on surfaces of walls any colour as approved by Engr-in-charge.

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping down smoke soot, moulds , moss and efflorescent salts and greasy spot etc, and applying one coat of white wash on walls including all cornices etc.

Description all as per item 15 here - in - before but on ceiling

M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of tinted oil bound distemper on walls complete all as spd and as directed by Engr-in-charge.

Description all as per Ser item No 70 above but two coats

Description all as per Ser item No 70 above but on ceiling.

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot, and greasy spot etc, and applying one coats of exterior emulsion paint (Apex) on surfaces of walls/Floor surface any colour as approved by GE

Description all as per Ser item No 19 above but two coats

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot, and greasy spot etc, and applying two coats of interior washable paint including one coat of 1mm wall putty complete on wall surface any colour as approved by Engr-in-charge.

M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified any colour as approved by Engr-in-charge.

Description all as per Ser item No 21 above but on steel surfaces.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 15cm high & 2.5cm width with thick synthetic enamel paint over and including one base coat of synthetic enamel paint on plaster or concrete surface for writing of letter.

S & F 5mm Alluminium composite panel of size n'exc 0.3m x0.3m for building no of minium letter n'exc 6 No's on a plate fixed with minium 02 nos of fasterners of stainless steel screw complete all as spd and dir by Engr-in-charge.(colour of sheet/letter as per approval of Engr-in-charge)

M & L Chequered cement concrete tiles area exc 0.04 sqm but N'exc 0.09 Sqm x 25mm thick(with gray cement and no pigment), set, jointed and pointed in neat cement slurry in floors including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6.

M & L for machine pressed precast concrete interlocking paver block rubber moulding any shape and size with grey cement and pigment cnfirming to IS-15658-2006 of 60 mm thickness, M-35 grade over and including 25mm thick sand/stone dust complete all as spfd & directed by Engr-in-Charge.

Demolition of cement concrete unreinforced in groung floors, paving n.exc 15cm thickness (below or above ground level) and precast concrete articles as in kerb walls.

M & L 75mm thick Plain cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring,sub base,slab flooring, bedded complete as specified and directed by Engr-in-Charge.

M & L in repairs for precast reionforced cement concrete 1:2:4 , Type B-0 (Using 12.5mm graded stone aggregate) in 50mm thick jallies or louvers incl all mouldings complete and set in CM 1:4

S & F 2mm thick plain/dimond cut factory made Polycarbonate sheet in any colour fix at site of any shape as specified fixing to MS frame with anchor fasteners (min 04 Nos fastener or more ) as per fixing requirment and manufacturer instruction at site complete all as spd and dir by Engr-in-charge.(MS frame shall be paid separetely.

M & L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths)as in other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, complete

M&L for cutting holes into or through brick/stone walls built in cement mortar (nexc 400mm thick), superficial area exc 400 Sqcm nexc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required.

M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall.

M&L preparation of new steel surfaces of any description,exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M/S PIYUSH CONSTRUCTION COMPANY (BID ID -3483250)

M/s Ramesh & Company (BID ID -3478005)