GE/SRA/T-53/2021-22

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Demolition Cement Concrete (un-reinforced) in Toilet Floors, Sunken Floors including taking out PCC of any description and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) of Roofs, Floors (other than Ground Floors), Beams, Staircases, Landing, Chajjas and similar Suspended Work (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Pressed Steel Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 Square Metre Each, complete all as specified and as directed.

Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down existing Water Proofing Treatment including existing Plaster of Sunken Floors/ Walls, etc. including raking out joints, hacking for key, scrubbing down with water and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

Taking down damaged/unserviceable Asbestos Plain Building Boards of any descriptions, complete all as specified and as as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 4 here-in-before) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Cutting Holes in Brick Walls, not exc. Half Brick built in Cement Mortar for inserting of Cooler Stand, Lugs, GI Tubing and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

Taking down shutter of any description, area exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified.

M&L Factory Made Panelled Shutter 35mm thick of Second Class Hardwood with Panels of 12mm thick Veneered Particle Board medium density wood with commercial face veneered both side and fitted to Chowkats, having size of Rail and Stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter with wood free EPS 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.

M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item. MAKE : RAM FABRICATORS PVT LTD, PANCHKULA/ GANPATI DOORS, RAJPURA/ FRIENDS MANUFACTURING COMPANY, KOTKPURA (PUNJAB)

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed

S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.

S&F Mild Steel Sliding Door Bolts having length of Bolt 250mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.

S&F Cold Rolled Mild Steel Butt Hinge 100mm long medium weight and fixed, complete all as specified and as directed.

S&F Aluminium Handle 100mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.

S&F Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixed-in-repairs, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

M&L applying Flexible Water Proofing & Protective coating on Floor and Walls of Sunken portion, using Dr. Fixit Pidifin 2K (Two Pack Cementitious Waterproof Coating), comprising with the following :- (a) Rendering/Plastering 15mm thick on Brick, Concrete surfaces in Cement Mortar1:4, finishing plastered surfaces Even and Smooth without using Extra Cement. (b) Applying Two Coats of Dr. Fixit Pidifin 2K @ 1.50 KILOGRAM PER SQUARE METRE Each Coat on dried Plastered surfaces by a Masomary Brush or an appropriate Powder Spray equipment. The Second Coat shall be applied when the First Coat is completely dried.

M&L Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, type D-2 (40mm graded stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying/fixing of Tiles in Floor, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Plastic Dividing Strips 38x3.0mm thick, inserted in Floor to confirm design, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.

Cutting chases in Brickwork pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc not exc 10 cm all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate for Slab supported wall, column , kitchen counter slab, shelves including form work complete all as specified.

M&L MS TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking bending sprirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L Hardcore of broken bricks gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, rammed to a true surface and finished smooth complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stones including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.

M&L Non-skid Coloured Ceramic Tiles 7 to 8.0mm thick (Square/ractngular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.

M&L Non-skid Coloured Ceramic Joint free Tiles 7 to 8.0mm thick (Square/ractngular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Vertical Surfaces i.e. Dado, Skirting (depth not more than 150mm) etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixing over and including rendering 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.

M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.

M&L Floor (Paver) Tiles 300x300x9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed.

M&L Machine cut Granite Stone Slab (Black in colour) 18-20mm thick, fixed on Kitchen Platform, Floor or on Shelves, laid over and including Cement Screed 15mm thick in Cement Mortar 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Taking down existing Switch Board Cover with Switches & Sockets to facilitate the Tiling Work and fixing New Hylem Sheet with Screwes on Existing Switch Box including concealled the Open Casing Capping Wiring wherever required at the Site, etc. complete all as specified and as directed.

M&L Machine cut Granite (of any type) Tiles 16-18mm thick machine cut, in skirting/dado laid over cement screed 10mm thick in Cement Mortar 1:4 and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Machine cut Kota Stone Slab 18-20mm thick in Flooring,tread of staiurcase laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L Machine cut Kota Stone Slab 18-20mm thick in Riser of Steps, Skirting, Dado and Pillar, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces upto double storey, mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L Repairing of RCC Projection, Chajjas, Roofs Facia, Column, etc. upto Double Storey Building height adhering proper sagety precaution and including necessary preparation i.e. scrapping, cutting, chiseling and cleaning exposed reinforcement, surfaces of damaged, loosed RCC surfaces and applying one coat of cement slurry and filling the surfaces with Cement Concrete 1:1½:3 (12.5mm graded stone aggregate) and reinforced with welded mesh of weight RCC using coarse sand in patches area, complete all as specified and as directed. NOTE : Cost of Formwork and Welded Mesh shall be deemed to be included in the Quoted Unit Rate.

M&L preparing newly Plastered surfaces of Ceiling including cornices etc. and applying Three Coats of White Wash, complete all as specified and as directed.

M&L preparing new Plastered surfaces of Walls by applying Wall Care Putty 1 to 1.5 mm thickncluding Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of weather coat Exterior paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing newly Plastered surfaces of Walls by applying wall putty 1 to 1.5mm thick cutting/rubbing to obtained a Smooth Surface and applying Two Coats of weather Coat Exterior paint with approved tint ove a coat of primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing old Decorated/Treated Plastered surfaces of Walls upto double storey by Complete Removal of existing Treatment and by applying 1 to 1.5 mm thick, cutting/rubbing to obtained a smooth surface and applying two coat of weather coat exterior paint (in camouflage/plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling complete all as specified and directed.

M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L preparing old Distempered surfaces of Walls by Complete Removal of existing Treatment and applying Wall Care Putty 1 to 1.5 mm thick, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of walls including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of white wash on old surface of walls complete all as specified and directed.

M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

S&F 15 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, complete all as specified and direced.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head including flange, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type including flange, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down unserviceable Water Storage Tanks, complete all as specified and as directed. MAKE : SHEETAL/ SINTEX/SUPREME

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling / lowering down unserviceable Water Storage Tanks, complete all as specified and as directed.

S&F Ball brass valves 20 mm high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.

M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc.and Fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG/ POLYTUF

S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG / POLYTUFF

S&F Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges and fixing-in-repairs, complete all as specified and as directed.

S&F Chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR/ MARC / PARRYWARE T-9901 A-1

S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed. MAKE : PARRYWARE / JAQUAR/ ESSCO (as approved by GE)

S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed. MAKE : MODI/ SAINT GOBAIN/ TIRUPATI

S&F Glass Shelf (Bath Tray) with bracket and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR/ MARC/ PARRYWARE (as approved by GE)

S&F Corner Glass Shelf single Decker (Triangular shape) of size 30 Cm with bracket and fixed-in-repairs, complete all as specified and as directed.

S&F Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory overall size 810x510x205mm having Bowl size 405x354x203 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed-in-repairs, complete all as specified and as complete all as specified and as directed.

S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges and fixed, complete all as specified and as directed.

S&F CP Grating Round 100mm dia jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG Cat No. 111 or as approved by GE

S&F PVC Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) junction single (single T)equal or unequal of 110 mm bore and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) junction double T (double T) equal or unequal of 110 mm bore and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110 mm bore and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 75 mm bore and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 75 mm bore and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) junction double (double T)equal or unequal of 75 mm bore and Fixed-in-repairs, complete all as specified and as directed.

M&L Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.

S&F Plain (White) PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, both side laminated, 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, and Fixed-in-repairs,complete all as specified and as directed. Make: JKD

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

S&F Magnetic Door Catcher medium grade to hold approx 1000 mm opening cabinet door and Fixed-in-repairs complete all as specified and directed

S&F Stainless steel frog hinges suitable for kitchen cupboards 18/19 mm PVC Celuka Board etc for smooth movement, and Fixed-in-repairs,complete all as specified and as directed.

E/M works/services

Taking down Copper/Aluminium Point Wiring any type in PVC casing caping /PVC Conduit (Light, Fan, Socket or Power) excluding Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fittings of any description and Making Good Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed.

Taking down/out unserviceable Wires only (but except Fittings & Fixtures viz Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting, etc.) from the Existing Point Wiring (Light, Fan, Socket or Power) without disturbing PVC Casing & Caping/PVC or Steel Conduit of any description, complete all as specified and as directed.

M&L independent Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit , medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size duly painted with Red Oxide Metal Primer with 3.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE SOCKET point 16 Amps, complete all as specified and as directed.

S&F Switch Piano 16 Amp, Flush type, Single Pole, 1-way and connecting up ,complete all as specified and as directed.

S&FSocket Outlet 6 &16 Amp, Piano, Flush type, 2-in-1, multi-purpose, 6Pin and connecting up , complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size duly painted with Red Oxide Metal Primer with 3.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/FAN POINT/ BELL POINT CONTROLLED BY ONE 1-WAY SWITCH 6 AMP, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire drawn through Existing Rigid Non-metallic PVC Conduit, Earth Continuity Cable connected to Common Earth dolly for ONE 5 PIN SOCKET OUTLET 6 AMP ON THE SAME BOARD, complete all as specified and as directed

M&L Point Wiring with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Cable, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size duly painted with Red Oxide Metal Primer with 3.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Cable connected to Common Earth dolly for ONE 6 PIN SOCKET 16 AMP ON INDEPENDENT BOARD, complete all as specified and as directed.

S&F PVC Conduit of size 32 mm, ISI marked, medium grade with all PVC Accessories and Making Good Surfaces to match the Exiting Treat-ment (as per Site requirement) including Taking down/out Old Unserviceable Conduit, complete all as per specified and as directed.

S&F in repairs Switch Piano 6 Amp, Flush type, Single Pole, 1-way and , complete all as specified and as directed.

S&F in repairs Socket Outlet 6 Amp, Piano, Flush type, 2-in-1, multi-purpose, 5 Pin and Fixing-in-repairs, complete all as specified and as directed.

S&F Ceiling Rose, 3 Terminals, PVC Polycarbonate, Isolated body and Fixing-in-repairs, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC rectangular block with cast iron junction box for mounting switches,sockets,fanregulator etc with 3 mm thick plastic laminated sheet cover of size up to 200 x 150 x 50 mm including cutting for mounting of switches and sockets, complete all as specified and as directed by Engineer-in-charge.

S&F in repairs PVC rectangular block with cast iron junction boxmounting switches,sockets,fanregulator etc with 3 mm thick plastic laminated sheet cover of size up to 250 x 200 x 50 mm including cutting for mounting of switches and sockets, complete all as specified and as directed by Engineer-in-charge.

S&F in repairs PVC rectangular block with cast iron junction box for mounting switches,sockets,fanregulator etc with 3 mm thick plastic laminated sheet cover of size up to 350 x 300 x 50 mm including cutting for mounting of switches and sockets, complete all as specified and as directed by Engineer-in-charge.

S&F Decorative Ultra Slim Linear LED Lighting Fixture with Extruded Polycarbonate, Environmental Friendly, Energy Efficient 5.0 Watt LED 6500K and Connecting up with and including Copper Conductor Cable of size 23/0.0076 multi-stranded, 3 Core from Ceiling Rose to Light Fitting and Fixing-in-repairs, complete all as specified and as directed. MAKE : HAVELLS Cat Part No. LHEXBLP7IN1W005 or equivalent in JAQUAR/ PHILIPS/ SURYA

S&F Decorative Ultra Slim Linear LED Lighting Fixture with Extruded Poly-carbonate, Environmental Friendly, Energy Efficient 9.0 Watt LED 6000K and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, connecting up and Fixing-in-repairs, complete all as specified and as directed MAKE : HAVELLS Cat Part No. LHEXBLP7IN1W009 or equivalent in JAQUAR/ PHILIPS/ SURYA

S&F Decorative Ultra Slim Linear LED Lighting Fixture with Extruded Polycarbonate, Environmental Friendly, Energy Efficient 18 Watt LED 6000K and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, connecting up and Fixing-in-repairs, complete all as specified and as directed MAKE : HAVELLS Cat Part No. LHEXBLP7PN1W018 or equivalent in JAQUAR/ PHILIPS/ SURYA

S&F Decorative Wall Light Fixture made up of Polycarbonate with and including LED Lamp 0.5 Watt (B-22 Base) Light fixed on the Wall/ Ceiling and connecting up with and including Copper Conductor Cable of size 23/0.0076 Sqmm 3 Core PVC Copper Flexible Conductor and necessary Earthing Connection from Ceiling Rose to Light Fitting, complete all as specified and as directed. MAKE: HAVELLS CATPART NO:LHFOECE1TZ1O014/PHILIPS.

S&F MCB DB 8-way, Single Pole & Neutral, Double Door type, Regal Grey Colour, Sheet Steel Phosphatised, Powder Coated with 63 Amp rate Bus-bar, Neutral Link Earth Bar & Din Rail duly embedded/Concealed upto Wall surfaces including Connecting up with Existing Cable Incoming and Outgoing with Cable Lugs as per the Site requirement and and Making Good Disturbed Surfaces of Walls/Roofs/Floors, etc. so as to Match with the Existing Finishes and Fixing-in-repairs, complete all as specified and as directed.

S&F Sheet Metal Enclosure, Single Pole with a 2-Pin and Earth Plug and Socket with and including 1 No. MCB Single Pole, 32 Amp, 240 Volt and Connecting up including Fixing-in-repairs, complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volt, Adjustable type, 100 Amps with breaking capacity 25 kA including Connecting up and Fixing-in-repairs, complete all as specified and as directed.

M/s Sheoran Brothers

shiv shanker enterprises

YESH BUILDERS

Sethi Builders

DCM ENTERPRISES

M/s Shree Bala Ji Construction Company

M/s GURFATEH BUILDERS