REPAIR TO PLASTER, EXTERNAL PAINTING AND MISC B/R WORK IN DOMESTIC, TECHNICAL AND RAKSHANAGAR AREA AT 11 BRD AF STN OJHAR.

Amount

Taking down cement plaster on brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc.compete all as specified as directed by Engineer -in -charge ,

M&L for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by wt of cement (Note: Water proofing compound will be measured and paid separately under relevant item) Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

Ditto- as item no 2 above but 20mm thick in two coats

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces and finished surface even and smooth without using extra cement complete all as specified and as directed.

Ditto -all as per item No 7 above, but 5mm thick in CM 1:3 on ceiling surfaces.

Supply only Integral water proofing compound. (Make: Choksey/STP/Fosroc)

M&L for new plastered surface of wall/ceiling and applying two coat of exterior acrylic emulsion (Weather coat) over a coat of exterior acrylic primer of approved colour or white/blue of ASIAN/Berger/CHOKSEY/STP of equivalent all as specified and as directed.Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

M&L for Preparation of newly plasterd surfaces of wall/ceiling by brooming down and applying two coat of cement based paint over a coat of primer white or tinted on walls including cornices etc complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor shall make his proper arrangement of work scaretted in all the buildings. Note: The rate quoted shall be deemed to include for work upto four story building & height upto 15.00 m including all safety measures, scaffolding etc. required for carrying out the work and nothing extra on this account shall be admissible.

M&L for Preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer white or tinted on walls including in patches also , cornices by roller machine etc.complete all as as specified and as directed by Engineer in charge

M&L for Preparation of newly plasterd surfaces and applying three coat of white wash on walls including cornices etc.complete all as specified and as directed by Engineer in charge

Ditto -all as per serial item No.12 above but 3 coats on ceilings surfaces complete all as specified and as directed by Engineer in charge.

M&L for Complete removal of existing treatment & cleaning by including vacuume based sanding machine /mechanical removal removing nails etc, and applying Two coats of exterior Acrylic emulsion (Apex)/Equivalent of as white/sappire blue/dark blue or as approved over one coat of exterior water based wall primer and making good the even on surface by filling with wall care putty on walls, ceiling, facias, beams, cornices etc with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge. Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge. Stage 1 : Complete removal of existing treatment. Stage 2 : Priming with exterior water based wall priming Stage 3 : 1st coat of exterior Acrylic emulsion (Apex)/Berger weather coat) of any colour Stage 4 : 2nd coat of exterior Acrylic emulsion ((Apex)/Berger weather coat) of any colour

Complete Removal of existing treatment on old surfaces of wall/ ceiling by scraping, wetting and make the surface smooth by rubbing/filling the holes with cement based wall care putty and applying two coat of cement base paint over a coat of primer white or tinted including cornices etc.complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor to make his proper arrangement for water storage for curing and scaffolding upto 4 storey building

M&L for Preparation of old surfaces of wall/ceiling by brooming down and applying one coat of cement based paint white or tined on walls including cornices etc complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor to make his proper arrangement for water storage for curing and scaffolding upto 4 storey building

Complete removal of existing treatment & cleaning by including vacuume based sanding machine removing nails etc, and applying Two coats of exterior Acrylic emulsion (Apex)/Equivalent of as Camouflage pattern or as pattern approved by Engr-in-Charge over one coat of exterior water based wall primer and making good the even on surface by filling with wall care putty on walls, ceiling, facias, beams, cornices etc with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge. Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge. Stage 1 : Complete removal of existing treatment. Stage 2 : Priming with exterior water based wall priming Stage 3 : 1st coat of exterior Acrylic emulsion (Apex)/Berger weather coat) of any colour Stage 4 : 2nd coat of exterior Acrylic emulsion ((Apex)/Berger weather coat) of any colour

Complete Removal of existing treatment and applying two coat of Oil bound distemper over a coat of primer after smoothing of surfaces complete of wall and ceiling all as specified and as directed by Engineer in charge

M&L for two layer of 1.5 mm thick Birla Wall care putty on walls surfaces complete all as specified and as directed.by Engr in charge.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying two coat of distemper oil emulsion white or tinted on walls including cornices etc.complete all as as specified and as directed by Engineer in charge

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying one coat of distemper oil emulsion white or tinted on walls including cornices etc.complete all as as specified and as directed by Engineer in charge

Preparation of old painted surfaces of wood and wood based of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge

Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of aluminium paint complete all as specified and directed by Engineer in charge.

Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 16m height buildingincluding necessary ladder for climbing and including replacement of GI Nipples and other fittings if required .complete all as specified and as directed by Engineer-in-Charge.

All as per item No.30 above but 20 mm bore complete all as specified.

Labour only to adjust the float valves of 15/20/25mm dia of tanks of any capacity up to 8000 ltr capacity and upto 4 storey bldg.

S&F in repair Bib tap PTMT any colour/high pressure, screwed down high pressure as specified for 15mm bore .Complete all as specified and directed by Engineer-in-charge.

S&F in repair Pillar tap PTMT any colour/high pressure, screwed down high pressure as specified for 15mm bore.Complete all as specified and directed by Engineer-in-charge.

S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed (Make : Jaquar /Prayag/Plumber or equivalent

Fixing in repair wash basin mixer/ Wall mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as direceted.

S&F in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealled stop cock & 2 No. bib cock for each mixer (Make : As Approved. Complete all as specified and as directed by Engineer-In-Charge

S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head . Including dismanteling and making good the tiles if required of make as approved, Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib tap for Washing machine of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcomplete all as specified and as directed by Engineer-In-Charge

Taking down the loosen EWC/WHB/Sink of any description and refixing the same with angle iton support to wall for WHB and sink, for EWC screwing to floor and side joints filled with white cement for strengthening and making good complete all as directed.

S&F in Repair PVC connection 15mm size with Brass nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair 32 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge

S & F in Repairs 40 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge

S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed by Engineer in charge

S & F in repairs floor door stoppers double legged of aluminium alloy body & tounge aluminium anodised alloy with rubber fixed with steel screws on the door frame of size 150 mm long compete all as specified as directed by Engineer -in -charge

Removing of building materials & debries of any type the rate included i.e loading ,unloading and stacking/spreading etc outside of MD land upto 5 km with own arrangement by Contractor.Note: One load will comprise of 6Cum of debris

Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended work pavings n exc 15 cm thickness

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia.

M&L for applying two coat of damp proof water proofing paint as per manufactures intsruction over roofs, chajjas after plaster repair of Make: Asian Paints/ Berger all as approved and specified.

M&L for applying two coat of floor paint acrylic lacquer clear /pigmented for exterior floor tiles for providing glossy finish/matte of approved make all as directed and specified.

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified.complete all as specified and as directed by Engineer-In-Charge

S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

S&F Mirror with plastic cabinet of size 550mmx400mmx75mm single door as per approved Make:- Prayag/Nilkamal Common Note for BOQ item No 1 to 53: 1.The contractor shall deploy skilled tradesmen i.e. 01 x plumber with his helper, 01 mason and helper and required painters and required T&P , complaints slips daily in the morning from AGE B/R office by shall be collected, the contractor/supervisor and same shall be resubmitted at evening within completion of alloted job duly signed by user . The complaint book shall be made by the Contractor as sample given by Deptt. No extra shall be paid on this account & rates are deemed to be included. 2. As per complaints , The mason with his helper and required T&P , collect the complaints slips from AGE B/R office by the contractor/supervisor and same shall be resubmitted at evening within completion of alloted job. No extra shall be paid on this account & rates are deemed to be included . 3.In case of failure to attend the complaint within 48 hrs the contractor shall be double recovery quoted by the contractor with each connecting item not attending complaint. 4.The process of complete removal of previous / existing treatment must be done mechanically. All procedure as per items should be got done through an authorized applicator of approved paint firms

GUND PARAG JAGANNATH (BID ID -3278685)