WELCOME MAINTENANCE TO OFFICERS ACCN AND PERIODICAL SERVICES TO CERTAIN BLDG IN TECH AND RESIDENTIAL AREA AND CLEANING AND REPAIRS OF SEWAGE LINES, MANHOLES, SEPTIC TANK, DRAIN, SOAK WELL AND REPAIR/RENEWAL INTERNAL WIRING , ELECTRIC FITTINGS AND FIX

Amount

Taking down chowkats or frames with shutters n.exc 1.5 sqm each without taking off shutters from the frames complete all as specified and directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters etc and applying one coat of white wash on walls complete all as specified and directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash on ceiling complete all as specified and directed

Material and labour for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of distempered surfaces, filling nail holes including putty where necessary and applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed .

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick CM 1:6 as bedding layer complete all as specified and directed.

M&L for Ist quality glazed tiles ceramic coloured tiles 300mmx450mmx7mm thick in vertical surfaces such as skirting and dados etc set and jointed in neat cement slurry pointed in coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles 300mmx200mmx7mm thick in vertical surfaces such as skirting and dados etc set and jointed in neat cement slurry & pointed in coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for fully Vetrified tiles 10mm thick coloured (Square/rectangular) polished area of each tiles not n.exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed.

Material and labour for 15mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth (with out using extra cement) complete all as specified and directed .

Material and labour for rendering 5mm thick in CM 1:3 on ceiling complete all as specified and directed.

M&L for preparing new plastered surfaces of walls, applying two coats of oil bound distemper (oil emulsion) over a coat of alkali resistant primer on walls complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling including cornices, pilasters etc and applying two coats of white wash on ceiling complete all as specified and directed

Supply and fix in repair low level flushing cistern with complete fittings including float valve, flush pipes, brackets for fixing etc of heavy duty complete all as specified and directed

Supply and fix in repairs PVC water closet seat cover white or cloured, closed pattern with flat bottom and mild steel chromium plated or aluminium hinges device complete all as specified and directed.

Supply and fix in repairs vitreous china wash basin white flat back, size 550mm x 450mm including brackets, CP waste coupling 32mm dia and pipe inluding pillar tap 15 mm bore etc all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet pan pedestal (pattern) white with P or S trap with plastic seat cover complete all as specified and directed.

S&F in repair viterous china IWC squatting pan " Orissa pattern" size 580mm x 440mm white with integral foot rest incl 'P' or 'S' Trap (Excluding flushing cistern) and connecting to out let and flush pipe complete all as specified and directed.

Supply and fix in repairs PVC connections with brass socket on both sides 600mm long 15mm dia complete all as specified and directed.

Material and labour in repairs aluminium anodised wire cloth 0.45mm nominal dia of wire (average width of aperture 1.40mm) fixed with wooden beads including flap for opening complete all as specified and directed.

Taking up or down steel tubing and connection bore of pipe 15mm complete as specified and directed.

S&F 15mm bore galvanised water tubing medium grade with all fittings and complete fixed to wall and ceiling or laid in floor all as specified and directed.

Refixing old Steel tubing and connection in new and old position (wall, ceilling or floors etc) of 15mm bore of pipe all as directed Note: Steel tubing retrived from ser item No. 25.00 shall be reuse.

Taking up or down steel tubing and connection bore of pipe 20mm complete all as specified and directed

S&F 20mm bore galvanised water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed

Refixing old Steel tubing and connection in new and old position (wall, ceilling or floors etc) of 20mm bore of pipe complete all as specified and directed. Note: Steel tubing retrived from item No. 28.00 shall be reused.

S&F in repairs stop valves chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle,scrwed both ends for iron pipe of 15mm bore complete all as specified and directed

S&F in repair stop valves chromium plated with long shank and cup(concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle,scrwed both ends for iron pipe of 15mm bore. complete all as specified and directed.

S&F in repair angle cock chromium plated with long shank and cup(concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle,scrwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 15mm bore brass CP WHB mixture for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15mm bore brass CP wall mounting mixture for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair Bib taps, chromium plated cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe 15mm bore complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in openings as per specifications & drawings shown in SSR complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rails & bottom rails on either side & as gap insert or top rail & bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplied and fixing in the frame at site as per specifications & drawings as shown in SSR complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid and bedded and pointed in any mortar in floors, shelf, kitchen top etc complete all as specified and directed.

S&F 20mm thick granite slab for working platform/shelf and vertical surfaces duly machine polished full round on external/proected surfaces complete bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing etc including 15mm thick screed bed in CM 1:4 complete all as specified and directed

S&F in repair single mirror cabinet size 350mmx450mm complete all as specified and directed.

S&F in repair stainless steel plate rack 1mm thick of overall size 31cmx36cmx10cm complete all as specified and directed.

S&F in repair stainless steel towel rail 'D' type 450mm long with brackets bowl type for holdding towel rail complete all as specified and directed. (Cat part No 199, Make Prayag)

S&F in repair chromium plated health faucet 2 in 1 with 1.50mtr tube & hook complete all as specified and directed.

S&F in repair 15mm bore CP sink cock swan neck type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc and making good disturbed surfaces of walls, floors etc.complete all as specified and directed.( Note: Taking down of light fitting shall be measured and paid seperately)

M&L for point wiring with 1.5 sqmm multi stranded PVC FRLSH insulated unsheathed copper conductor cable FRLSH in and including PVC Casing & caping of size 20mm width medium grade ISI marked terminating in sunken box for one light point or fan point or bell point controlled by one switch including PVC insulated unsheathed 1.5 Sqmm copper conductor FRLSH continuous earth wire and connecting with earth dolly and making good the disturbed surfaces matching with existing specifications complete all as specified and as directed.

M&L for point wiring for 3 pin socket outlet, 5 Amps, independent, but below the switch board of light points in the same vertical plane with 2.5 Sqmm multi stranded PVC insulated unsheathed copper conductor FRLSH cable in and including PVC conduit 20mm dia medium grade ISI marked terminating in sunken box, plasitc laminated sheet 3mm thick including PVC insulated unsheathed 2.5 sqmm copper FRLSH conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed.

S&F in repair Sub main wiring with two single core PVC FRLSH insulated cable 4 Sqmm (Nominal dia) copper conductor multistrand and drawing in and including PVC concealed conduit 25mm dia medium grade ISI marked terminating in sunken box, 4 Sqmm multistrand copper conductor PVC FRLSH green unsheathed cable for earth continuity complete all as specified and directed. Note: Three run of 4 Sqmm wire & one run of PVC conduit shall be measured one unit.

S&F switch piano flush type 5 Amp one way AC 230 volts complete all as specified and as directed.

S&F socket outlet 2 in - 1, 5 Amp 5 pin AC 230 volt complete all as specified and as directed.

S&F switch socket outlet 2 in - 1, 5 Amp 5 pin AC 230 volt complete all as specified and as directed.

S&F switch Socket outlet 2 in 1, 6 pin 5 Amp and 15 Amp multi purpose socket outlet 3/6 AC 230 volt complete all as specified and as directed.

S&F in repairs ceiling rose of size 65 x 50mm 3 terminal AC 230 volt complete all as specified and as directed.

S&F lamp holder angle/ batten holder back light type with base plate suittable for 230 volt complete all as specified and as directed.

S&F door bell AC 230 volt buzzer/ding dong single phase complete all as specified and as directed.

S&F in repair MCB SP 6 to 32 Amps 10 KA complete all as specified and directed.

S&F in repair MCB SPN 40 Amps 10 KA, 'C' Series complete all as specified and directed.

S&F in repairs of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including double pole MCB 20 Amps complete all as specified and as directed.

S&F in repair surface and wall mounted 20 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230 V, 50 HZ complete all as specified and directed.

S&F in repair energy saving decorative wall mounting LED Lighting fixtures made out of polycorbonate suitable for 5 watt LED and making connections complete all as specified and directed.

S&F in repairs plastic laminated bakelite hylam sheet of size 20 cm x 25 cm , 3mm thick, cut to required size and shapes including making holes and necessary cuttings for fitting of switches/ sockets/regulators complete all as specified and directed

S&F in repairs plastic laminated bakelite hylam sheet of size 15 cm x 20 cm, 3mm thick, cut to required size and shapes including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

S&F in repairs for LED domestic bulb 9 Watt type 240 volts complete all as specified and as directed.

M&L for PVC insulated twin core flexible copper conductor cable of size 40/76 guage including taking down old unserviceable complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable FRLS in and including PVC concealed conduit 20mm dia medium grade ISI marked for one light point or fan point or bell point controlled by one switch on plastic laminated sheet 3mm thick including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specifications complete all as specified and as directed.

M&L for point wiring with 4 sqmm multi stranded PVC insulated unsheathed copper conductor cable FRLS in and including PVC concealed conduit 20mm dia medium grade ISI marked for 3 pin socket outlet, 15 amps. independent controlled by one switch on plastic laminated sheet 3mm thick including PVC insulated unsheathed 4 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the disturbed surfaces matching with existing specifications complete all as specified and as directed.

S&F switch piano flush type 5 Amp two way AC 230 volts complete all as specified and as directed.

-BLANK-

S&F in repairs electronic Ballast for FTL 36/40 watt 240 volts complete all as specified and as directed.

S&F in repairs for FTL rod 36/40 watt 240 volts complete all as specified and as directed.

S&F in repairs Bipin Holder for FTL fitting 36/40 watt patty type 240 volts complete all as specified and as directed.

S&F in repairs for LED Tubelight rod 20 watt 240 volts complete all as specified and as directed.

S&F in repair MCB TPN 63 Amps 10 KA 'C' Series all as specified and directed.

S&F in repairs MCCB, 3 Pole, 415 V, 125 Amp with breaking capacity 25 KA incuding connected accessories, spreader terminals complete all as specified and as directed.

S&F in repair sheet metal MCCB enclosures for TP/FP MCCBs with inbuilt neutral link for TPN system, IP 30 Protected complete all as specified and as directed.

S&F in repairs of sheet metal enclosures triple pole and earth with a three pin and earth plug with socket with one triple pole MCB 32 Amps complete all as specified and as directed.

S&F in repairs of bulk head luminarie with LED 10 watt lamps Hexagonal shaped with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old unserviceable light fittings all as specified and directed.

S&F in repair energy saving decorative wall mounting LED Lighting fixtures made out of poly corbonate suitable for 9 watt LED and making connections complete all as specified and directed.

S&F in repair energy saving decorative wall mounting LED lamp fitting made out of poly corbonate including 1x9/10 watt LED bulb and making connections complete all as specified and directed.

S&F in repair decorative surface mounted 34 watt LED luminaire, full output luminair for modern offices with CRCA powder coated body and new generation high effciency diffuser to provide soft glare free light suitable for 600 x 600 mm modular / POP/ Gypsum ceiling complete all as specified and directed.

S&F in repairs plastic laminated bakelite hylam sheet of size 12 cm x 12 cm , 3mm thick, cut to required sizes and shapes including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

S&F plastic laminated bakelite hylam sheet of size 15 cm x 20 cm , 3mm thick, cut to required sizes and shapes including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

S&F Modular switch 1 Way 6 Amp , 1 Module AC 230 volt complete all as specified and as directed.

S&F Modular switch 1 Way 16 Amp , 1 Module AC 230 volt complete all as specified and as directed.

S&F Modular socket , 6 A-2/3 pin combined , 2 Module AC 230 volt complete all as specified and as directed.

S&F Modular socket, 6 A/16 Amp -2/3 pin combined , 2 Module AC 230 volt complete all as specified and as directed.

S&F Modular white cover plate with frame 4 module complete all as specified and as directed.

S&F Modular white cover plate with frame 6 module complete all as specified and as directed.

S&F Modular white cover plate with frame 8 module complete all as specified and as directed.

Dismanteling and strip opening Water Heater 230 volts 25/35/50 litres capacity 1500 / 2000 watt rating, taking out geyser assemply elements and other connected accessories, descaling, cleaning of water tank, tubes assembly after repair reassembling, Electric supply lead 3 core, flexible, PVC insulated and sheathed stranded copper conductor, 1100 Volts grade, size 2.5 Sqmm (nominal area), replacement of 3 pin top 15 amp, reinstallation and connecting testing after satisfactorily serving and repairs complete all as specified and as directed. Note :- Electric cable 3 core 2.5 Sqmm, Syphon assembly for item No. 94 will be measured and paid separately under respective item of schedule.

Supply & fixing in repairs 3 core, flexible, PVC insulated and sheathed stranded copper conductor, 1100 Volts grade cable, size 2.5 Sqmm (nominal area) ISI marked complete all as specified and as directed.

Supply & fixing in repairs of Syphon assembly complete suitable for 25/35 ltr water heater ISI marked complete all as specified and as directed.

Supply & fixing in repairs of Syphon assembly complete suitable for 50 ltr water heater ISI marked complete all as specified and as directed.

Supply & fixing in repairs of PVC connection heat resistant 24'' long ISI marked complete all as specified and as directed.

Supply & fixing in repairs of Sheet metal bottom cover having two halves circle complete all as specified and as directed.

Supply & fixing in repairs of Thermostat 35® C to 75® C of ISI marked complete all as specified and as directed.

Supply & fixing in repairs of Indicating lamp (LED ) red or green any shape and size matching to existing geyser complete all as specified and as directed.

Supply & fixing in repairs of Heating Element of required size and shape, 1500 / 2000 watt ISI marked,suitable to 25/35/50 litre water heater complete all as specified and as directed.

Supply & fixing in repair gasket packing set suitable for 25/35/50 litre water heater complete all as specified and as directed.

Supply and fixing in repairs of glass wool superior quality for geyser including removing inner tank and refixing properly complete all as specified and as directed.

S&F installation, testing and commissioning in repair of pressure die-cast aluminium housing with high power LED bldg security light fitting with IP-66, 1x 25 Watt , fixed in position with and including 40 mm dia light grade GI Pipe made to shape not less than 1.2 Mtr long for mounting fitting with and including suitable size duly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed.

M&L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth strip 25 x 4mm as earthing lead by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil,PCC work in 1:3:6 pit and RCC 1:2:4 type B-1 pit cover reinforced with 6 mm dia MS bar 75 mm c/c 10 mm dia handle, charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2010, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit cover and testing complete all as specified and as directed.

All as per ser item No. 106.00 above but copper earth plate electrode of size 600x600x3.15 mm & copper strip 20x3mm as earth lead.

M&L for preparation of old decorated surface of ceiling by complete removal of existing treatment & applying two coat (1mm thick each coat) of white wall care putty complete all as specified and directed.

M&L for preparation of old decorated surface of walls by complete removal of existing treatment & applying two coats (1mm thick each coat) of white wall care putty complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion on ceiling over prepared surface complete all as specified and as directed .

M&L for washing/rubbing down and stopping of distempered, plastered and painted surfaces of wall/ceiling including cornices etc and making good of holes by filling holes and applying one coat of distemper oil emulsion complete all as specified and as directed .

M&L prepartion of old existing wall surfaces including cornices, plastered or un-plastered surfaces by brooming down or steel wire brushing, moss efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint over and including a coat of wall primer(Alkali resistant) including filling up of holes by wall care putty wherever required complete all as specified and directed.

M&L for preparation of old surface and applying two coats of weather coat exterior emulsion paint over a coat of alkali resistant exterior wall primer all as per manufacturers instruction all as directed by Engr-in-Charge.

M&L for painting circle of 200mm dia on surface of wall with two coats of synthetic enamel paint (black) & writing building number (eg-P-45 or P-80 etc) with synthetic enamel paint (white) with heght of letter 125mm and width 10mm all as directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 on fair face of brick wall or concrete surfaces, finished even & fair including mixing of water proofing compound @ 3% of cement weight or as per manufactures instruction (WPC shall be measured and paid separately as supply only) complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and as directed .

Supply only liquid water proofing compound.

Cleaning of sewage lines 100mm dia to 250mm dia SGSW/RCC pipe by rodding or by water pressure and cleaning of sewage lines, manholes to manhole complete by manually or mechanically all specified and directed.

Cleaning of manholes up to depth of 1.5m by taking out sludge, mud ,silt & other foreign materials of any form from the manholes by any means and removing the same to out side MoD land (Campus premises) to a distance exc 5 KM all as specified & directed .

Cleaning of manholes of depth exc 1.5m but n.exc 3.00m by taking out the sludge, mud ,silt & other foreign materials of any form from the manholes by any means and removing the same to out side MoD land (Campus premises) to a distance exc 5 KM as specified & directed .

Cleaning, de-silting emptying of existing septic tank capacity for 50 users incl taking out other materials of any form from septic tank by any means and removing the sludge and foreign materials out side MoD land (Campus premises) to a distance exc 5 KM complete all as specified and directed.

All as per ser item No. 121.00 above but 100 users.

All as per ser item No. 121.00 above but 200 users.

All as per ser item No. 121.00 above but 400 users.

Cleaning, de-sludging & empting of existing storm water drain by manually in any size and shape including taking out drain cover & refixing the same position after cleaning complete all as specified and directed.

Cleaning of all blockages of Nahni trap/floor trap, bottle traps, gully traps, P or S traps of WCs, 100mm / 75mm dia CI pipe and stacks upto 1st manhole, CI / SWSG pipe between gully trap & 1st manhole, CI Tee/door bends etc. to maintain internal sewage system with manual/pressure cleaning pump & flexible rods and other necessary equipments on any height of floor (Max G+4 floor) complete all as specified and directed.

Notes for ser item 118.00 to 126.00 :- 1 Rate also includes for necessary tools and plants which is required to carry out the cleaning works i.e cleaning rod, bucket, bamboo sticks, kashi etc. 2. Minimum one number of safaiwala along with necessary tools will be required to report the complaint cell to collect the complaint slip from concerned JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand on sundays and holidays and on additional working hours. Contractor shall provide the same to meet the requirements. As per numbers of complaints additional safaiwala/helper shall also be provided by the contractor but no claim on this account shall be admissible as the payment is to be made per complaint. 3. In case of absence of the safaiwala with tools at complaint cell on any working day, or on the particular day for which demanded, contractor shall be liable to pay penalty @ Rs. 700 per day.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil complete all as specified and directed .

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate cast in situ as in coping /benching including necessary formwork complete all as specified and directed

M&L for 40mm thick, plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregated),as in surface channels & drains all as specified and directed

M&L for precast reinforced cement concrete 1:2:4, type B1, using 20mm graded stone aggregated as in cover slab for manholes septic tank etc all as specified and directed (NOTE : Reinforcement shall be measured and paid seperately)

M&L for fair finished of drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and directed

M&L for providing 10 mm dia TMT bar and over cut to length, bent to shape required including, cranking and binding with mild steel (annealed) wire not less than 0.9mm dia complete all as specified and directed.

All as per ser item No. 133.00 above but 8mm dia as in stirrups and spacers/binder.

M&L for cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150mm dia including packing under and haunching against the pipe after they are laid including necessary formwork complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150 mm pipe complete all as specified and directed .

M&L for salt glazed stoneware drain pipes 150mm dia (internal) grade 'A' laid in trenches and jointed, complete all as specified and directed

Returning, filing in including, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified and directed.

Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed .

Cutting in to existing manholes for connecting new drains pipe internal dia 150mm and making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 sec) in cement concrete 1:2:4 type B1, smooth finished, and reforming benching as required all as specified and directed

-BLANK-

Supply and fix PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall including taking down old unserviceable pipe complete all as specified and directed.

S&F PVC (SWR) Single 'T' equal or unequal 110 mm bore complete all as specified and directed .

S&F PVC (SWR) bends any radius, 110mm dia complete all as specified and directed .

S&F PVC (SWR) vent cowl any radius, 110mm dia. complete all as specified and directed .

M&L for PVC (SWR ) floor trap of dia 75 mm with grating, including solvent cement and fixed in position complete all as specified and directed .

Demolition of brick work or stone boulder built in cement mortar including all quoin, arches, pillars etc complete all as specified and directed .

Demolition of cement concrete un-reinforced of any description and in any position not otherwise specifically provided for (below or above ground level ) complete all as specified and directed.

M&L brickwork with subclass 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed..

Demolition of cement concrete (reinforced cut as required to facilitate to demolition) of any description and in any position not otherwise specified and directed.

M&L for rendering 15mm thick on fair faces of brick/stone or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

S&F in repair Phase brass for 15mm bib tap stop cock, pillar cock, mixture and concealed stop cocks (nos 1,2,3) complete all as specified and directed .

S&F in repair 300 mm ordinary rat tail rod pattern door spring MS incl roller & plate complete all as specified and directed .

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor of 150 mm long complete all as specified and directed.

Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc(upto 5 storey building) complete all as specified and directed..

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each (upto 5 storey building) complete all as specified and directed.

S&F sheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm each (upto 5 storey building) complete all as specified and directed.

S&F in repairs Stainless steel wire cloth of 0.36mm nominal dia wire and average width of aperture 1.40mm & fixed with tacks or stainless steel wire staples complete all as specified and directed.

-BLANK-

S&F 18 mm thick Celuka ply/ Century PVC Board of one side Prelam/ Rigidlam and other side plain white colour to make kitchen cabinet shutter/drawer front shutter including dismantling & taking down old unserviceable complete as per specification and as directed.

S&F continuous (Piano) hinges of Brass bright finish or electrogalvanised for 30mm width of flaps complete all as specified and directed .

S&F 40mm dia, cup board knobs fixed with nut, screw and washer of MS, bright finish complete all as specified and directed .

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed.

S&F door seal 1mtr long for any type of doors complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required reconnecting and re-fixing in position of capacity exc 250ltr and not exc 500ltr com plate all as specified and diercted.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required reconnecting and re-fixing in position of capacity exc 500ltr and not exc 1000ltr com plate all as specified and directed

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed bore of pipe 20mm complete all as specified and directed.

S&F in repair 15mm bore Pillar taps, (fancy type)cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot' or Cold with long screwed Shanks and fly-nuts, complete all as specified and as directed.

S&F 15mm bore Pillar taps, (fancy type) cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot' or Cold with long screwed Shanks and fly-nuts, complete all as specified and as directed.

S&F in repair 15 mm bore Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug and washers and wastes including bedding in cement mortar on two dwarf wall or including cantilever brackets and connecting union to pipe, over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including waste coupling complete all as specified and as directed.

S&F in repair vitreous china wash hand basin , white, flat back ,size 550mm x 400mm including brackets, 32mm dia PVC waste coupling and waste pipe complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flush pipe complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in flooring complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F PVC connections 15mmX450mm size with PTMT nuts complete all as specified and directed .

S&F in repair 32mm bore PVC waste pipe length 800mm complete all as specified and directed .

S&F in repair PVC cover lid for PVC water tanks of any capacity complete all as specified and directed .

M/s Anjali Construction

M/s A.K. Trading Co.

M/S YOGANSH CONSTRUCTION CO.