REPAIR/MAINT TO LEAKAGE, SEEPAGE, ROOF TREATMENT AND MISC B/R WORKS, PLUMBING WORKS, JOINERY, ALUMINIUM AND MISC BLDG WORKS AND TOILETS BATHROOMS, SANITARY ITEMS AND PERIODIC SERVICES AT ZONE B AT CH (CC) UNDER GE E/M LUCKNOW

Amount

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore with and including new fittings complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore with and including new fittings complete all as specified and directed by Engineer-in-Charge.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F 5 mm thick printed PVC sheet in strips & channels feathered at the edgesfor fixing on solid PVC wall lining, insulated PVC wall lining, & solid PVC partions of solvent cement and fixing at site complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n exc 1 sq.m each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed by Engineer-in-Charge.

S & F IInd Cl H/W plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F mild steel work as in hold fasts and similar articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engineer-in-Charge.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated creosoteting small articles such as back of chowkats & hold fasts etc area n exc 0.10 sqm each complete all as specified and directed by Engineer-in-Charge.

All as per item 15 above but treating small articles such as hold fasts etc area n exc 0.10 sqm each

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with complete all as specified and directed by Engineer-in-Charge.

M&L glazed and skeleton shuitters 35m thick of 2nd class hard wood open rebated and prepared to receive glass, gauage etc(with sash bars) in window ventilators are provided with sytle and rails edges of framing plain, chamfered or rounded fitted with cut complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

M&L glazed and skeleton shuitters 30m thick of 2nd class hard wood open rebated and prepared to receive glass, gauage etc(with sash bars) in window, ventilators are provided with sytle and rails edges of framing plain, chamfered or rounded fitted with cut complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B21 complete all as specified and directed by Engineer-in-Charge.

S&F butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed by Engineer-in-Charge.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type anodised, 100mm long complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new previously untreated surfaces of wood or wood based material over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed by Engineer-in-Charge.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge.

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge.

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge.

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PTMT( Polytetra Methyllene Terephthalate )Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP Angle stop cock( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous China wash down water closet pan ( padestal pattern Water Closet Cat No.20012, white) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete all as specified and directed by Engineer-in-Charge.

S&F in repairs VC WHITE Squatting pan ,'Orissa' pattern size 580x440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphon complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum), with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) , fixed in repairs including connections to flushing pipe and outgoing complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting complete all as specified and directed by Engineer-in-Charge.

M&L in repairs 32 mm waste fittings , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 32 mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified and directed by Engineer-in-Charge.

S&F in repair Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F Gun metal, in repair globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F washer for flushing cistern including taking down old washer complete all as specified and directed by Engineer-in-Charge.

S &F door seal with aluminium 20 x 1.5 mm strips with wool complete all as specified and directed by Engineer-in-Charge.

S&F PVC Syphon to PVC flushing cistern including taking down old syphon, complete all as specified and directed by Engineer-in-Charge.

Taking down pipes (any sizes) incl all fittings complete all as specified and directed by Engineer-in-Charge.

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed by Engineer-in-Charge.

All as per item No 62 above but dia of 75mm

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

All as per item No 64 above but dia of 75mm

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and directed by Engineer-in-Charge.

All as per item No 67 above but dia of 75mm

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. (Note : Earth work will be measured and paid separately)

All as per item No 69 above but dia of 75mm

All as per item No 69 above but dia of 150mm

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified and directed by Engineer-in-Charge. (Floor door springs where renewed shall be measured and paid separately under appropriate)

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified and directed by Engineer-in-Charge. (Floor door springs where renewed shall be measured and paid separately under appropriate)

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and directed by Engineer-in-Charge.

S&F in repair for Aluminium Anodised window, ventilator fixed type shutter, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw, complete all as specified and directed by Engineer-in-Charge.

S&F in repair for Aluminium Anodised door shutters, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Powder coated Aluminium sections ( conforming to IS) door frames with double leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 2 Nos , jointing cleats, glazing clips, designation No. 1 , universal type , Al die cast anodised Hydraulic door closers aluminium body -02 Nos , push plate- 2 Nos , standard lock- 1No., Aluminium hinges 100 mm long butt hinges, 8Nos , Aluminium anodised handle circular type of 100 mm dia-04 Nos , Aluminium anodised tower bolts 200 mm long -04 Nos , complete, fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair anodised Aluminium sections ( conforming to IS) door frames with single leaf shutter complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, floor door stoppers, , jointing cleats, glazing clips, Al die cast anodised Hydraulic door closers aluminium body designation No. 3 , universal type , push plate, standard lock, Aluminium hinges 100 mm long butt hinges 4Nos , Aluminium anodised handle circular type of 100 mm dia-02 Nos per shutter, Aluminium anodised tower bolts 200 mm long -02 Nos per shutter complete all as specified and directed by Engineer-in-Charge.

S&F for 10 mm thick toughened glass fixed with rubber beading fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

S & F in repair of PVC coated drapery rod of 20mm dia complete all as specified and directed by Engineer-in-Charge.

S & F brass coated knob at both ends of drapery rod of 20mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP wall mixer for mixing hot & cold water screwed down for iron pipe & fixed for 15 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP WHB mixer for mixing hot & cold water screwed down for iron pipe & fixed for 15 mm complete all as specified and directed by Engineer-in-Charge.

S&F Solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer-in-Charge.

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified and directed by Engineer-in-Charge.

M&L 20 mm thick Granite ( of any type any coloure ) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screeding in CM 1:4 complete all as specified and directed by Engineer-in-Charge. ( Note Screed bed shall not be measured and paid separately).

M&L for providing bullnosing / moulding to exposed edges of stone ( Udaipur/ granite/Kota/marble ) and polishing to match the adjoining surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium anodised door handle circular type 120 mm dia fixed to aluminium door frame complete all as specified and directed by Engineer-in-Charge.

S&F (in repairs) sensor controls urinals (with sensor) of Parryware or equivalent of other specified make complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.

S&F sensor in repair for urinals / concealed flushing cisterns of Jaquar or equilent of other specified make complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick PCC 1:5:10 type E-2 (using 40 mm graded stone agrregate) as in sub base floor etc complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone agrregate) as in sub base floor etc complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like complete all as specified and directed by Engineer-in-Charge.

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L 60 mm thick PCC interlocking tiles (rubber laminated finish ) of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified and directed by Engineer-in-Charge. (Sand cushion shall not be measured and paid seperately)

M&L 60 mm thick PCC intrelocking tiles of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified and directed by Engineer-in-Charge. ( Sand cushion shall not be measured and paid seperately)

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L Chequered cement concrete coloured tiles 20 cmx20cmx20 mm thick with coloured cement and no pigment , set, jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:4 as in floors complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

M&L 18-20mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over and including cement screed bed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

M&L 18-20mm thick machine cut Kota stone slab as in skirting /riser over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

Demolition of floor hearth or wall tiling including cement mortar bedding (But not backing) removeing serviceable tiles to store and rubbish off the premishes complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over and including 15 mm thick screeding complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick screed in CM 1:3 complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over and including 10mm thick screed in CM 1:3 complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

M&L coloured/designed as approved wall tiles (duracretes) 8 to 10 mm thick area of each tile exc 0.09 sqm but n.exc 0.16 sq m in vertical surface set and jointed in neat cement slurry and pointed in white/colured cement and pigment to match over 15 mm thick CM1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of existing roof treatment of any type complete all as specified and directed by Engineer-in-Charge.

M & L 15mm thick screed plaster on RCC slab CM 1:4 with using water proofing compound @ 3% by weight of cement.( WPC to be measured and paid separately) complete all as specified and directed by Engineer-in-Charge.

M&L Priming surfaces and applying normal treatment ( for moderate conditions) using hessian base felt , Type 3 grade 1 complete all as specified and directed by Engineer-in-Charge.

M&L Applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sq.m. including cleaning surfaces complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note : Integral WPC shall be measured and paid seprately )

Supply only integral WPC of approved quality complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface including a thin layer of wall care putty complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of newly plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with cement paint primer ( before application of cement base paint) including two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

Demoiltion and breaking up 50-100mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge.

M&L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-in-Charge.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, mass concrete etc complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of blockage of sewer lines, manholes in any type of sewer line( i.e. branch sewer line, main sewer line) and opening of blocked WCs, bath, urinals etc. by attending the complaints for day to day maintenance in all days in a month except Sundays, Gazetted Holidays and National Holidays by way of cleaning desludging foreign materials as well as rodding of sewer line between manholes manually /mechnically or pumping out sewage from blocked manhole including desluding where required and ordered by EIC and keeping sewer line functional entering from floor trap, water closet, soil waste and vent pipe. gully trap upto final drop/outlet into septaic tank, soakwell all as specified and directed of any size complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors) eams, staircases, landing, chajjas, and similar suspended work complete all as specified and directed by Engineer-in-Charge.

M&L 50 mm Precast cement concrete type B-1 , 1:2:4 ( 20 mm graded aggregate) slab flooring, bedded , and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

S&F 32 mm Saintless steel (SS 304) 900 mm high railings fixed in repairs including polishing & all fittings complete all as specified and directed by Engineer-in-Charge.

Grinding of old kota stone flooring upto mirror finish level including polisihig etc complete all as specified and directed by Engineer-in-Charge.

Buffing over SS railings 900 mm high etc complete all as specified and directed by Engineer-in-Charge.

M&L in repair for 3mm thick ACP sheet wooden finish along with almuminium frame work and making groove and shelf complete all as specified and directed by Engineer-in-Charge.

M&L 12 mm thick toughend glass partion including all necessary fittings complete all as specified and directed by Engineer-in-Charge.

M&L 12 mm thick toughend glass door including all necessary fittings complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of old treated surface of wall and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for PCC type B-1 (1:2:4) (20mm graded aggregate) as in benching and coving / filleting over chajjas complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall/ roof and applying two coats of exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment for wall/ roof and applying two coats of weather proof exterior emulsion paint over a coat of primer including making good edges of chajjas and uneven surface of plaster over and including a thin layer of wall care putty complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

All as per item No. 145 above but on ceiling.

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade complete all as specified and directed by Engineer-in-Charge.

All as per item No 147 above but two coats

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade complete all as specified and directed by Engineer-in-Charge.

All as per item No. 149 above but two coats

All as per item No 149 above but on ceiling.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a thin layer of white wall putty on old plastered surfaces including prepration complete all as specified and directed by Engineer-in-Charge.

M&L applying one coats of Apex ( Asian Paint) / Weather coat (Berger) over old painted surface including preparation of wall surface complete all as specified and directed by Engineer-in-Charge.

Dismantling asbestos Cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed by Engineer-in-Charge.

Dismantling structural steel work including doors, windows & gates but excluding framed trusses etc complete all as specified and directed by Engineer-in-Charge.

Dismantling unframed timber scantling 40 sqcm and over in section, in any position complete all as specified and directed by Engineer-in-Charge

S & F mild steel rolled section as in rafter, purlins where connected to comman rafters and running rails fixed with angle cleats or other connecting plates. Confirming to grade Fe-290 complete all as specified and directed by Engineer-in-Charge.

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based plain steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F for 1mm thick MS sheet valley gutters, galvanised class 3 half round of length and girth as fixed with rounded edges complete all as specified and directed by Engineer-in-Charge.

M&L for antimicrobial filling of all joints and cavities with polyster putty for wall surface and sanded flush to provide a jointless finish primer with metal primer to give a bonding of paint and then sprayed with a water based liquid plastic aseptic and self sterlizering wall coating system which protects against the growth of micro-organism such as mould fungi, yeast and bacteria on its surface equiavlent to a minimum dry film thickness of 200 micron complete all as specified and directed by Engineer-in-Charge. Make : Sikka Guard/Fosroc/SKK

Supply & installation of 1 mm antibacterial wall covering thickness 1 mm total weight 1200 kg/m2 polyurethane reinforced scratch resistant fire resistant slip resistant anti fungi & anti bacterial. The joints must be welds by the heat fusion process to get a seamless wall. The joints in manufacturer using a hot air gun for fusion of welding bar with wall covering omplete all as specified and directed by Engineer-in-Charge. Make/Importer : Gerfloor/Tarquet/LG

Supply & fixing in replacement 2mm thick non conductive flooring with carbon backing total thickness 2.00mm, total weight 2.40 kg/m2 polyurethane reinforced ,scratch resistant, fire resistant, chemical resistant , slip resistant, anti fungi & bacterial growth , dimensional stability 0.40%, static electrical charger < 1Kv , impact sound reduction approx +3bd, electrical resistant. Installation : The flooring would be installed on a smooth, clean sub floor which should be free from any undulation. A copper strip/mesh should be layer under the tiles, with one earthing point for every 150 sft of area and good quality water based adhesive for fixing as per as manufacturers recommendation. Thermal Welding : The joints must be welds by the heat fusion process to get a seamless floor. The joints in the flooring should be sealed by using a PVC welding bar of matching color to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. The same application to be done for wall skirting up to max 150mm and coving to be provided using appropriate material and method ,complete all as specified and directed by Engineer-in- Charge. Make/Importer : Gerfloor/Tarquet/LG Note : Old unservicable Material obtained from flooring shall be deposited to MES store yard.

M/S AMARJIT SINGH