Construction of Combined Office Building at Nadaun

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying of hard stone (for stone pitching under flooring) 22.5 cm(Twenty two point five centimetre) thick at site including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying cement concrete 1:3:6 (One cement : three coarse sand : six graded stone aggregate) 20 mm (Twenty millimetre) nominal size in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera including the cost of centering, shuttering and finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 18 mm (Eighteen millimetre) thick Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye colour) in flooring,steps with three grooves (Single Slab), risers Single slab), kitchen shelves in required design and patterns, in linear as well as curvilinear portions of the building all complete including nozing and moulding as per the architectural drawings with over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm (Eighteen millimetre) thick Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye colour or equivalent) machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for providing double moulding in granite steps in stairs Thread as required complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Marble work gang saw cut (polished and machine cut) of thickness 18 mm (Eighteen millimetre) for wall lining (veneer work), backing filled with a grout of average 12 mm (Twelve millimetre) thick in cement mortar 1:3 (One cement : three coarse sand), including pointing with white cement mortar 1:2 (One white cement : two marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm (Zero point five zero sqaure including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing Double edge moulding to 18 mm (Eighteen millimetre) thick marble stone counters, Vanities, Top of Column Pedestal etc., including machine polishing to edge to give high gloss finish etc. Marble work complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Precoated Galvanised Iron Profile Sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required upto all floor level/height including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Ridges Plain 500 - 600mm ( five hundred to six hundred millimetre) Precoated Galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point six six to two millimetre) thick of TATA/Sail make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 6 mm (Six millimetre) thick Cement bonded wood particle board as per IS:14276 plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etcetera (frame work to be paid seperatately) complete as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/ SAIL/ Apollo/ JSW Make ) in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, door and window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work in built up tubular (TATA/SAIL/APPOLLO MAKE) (round, square or rectangular hollow tubes etc.) trusses, railings/ hand rail and other similar frame work etcetera including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etcetera Hot finished welded type tubes complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel (TATA/ SAIL/ Apollo/ Shyam steel Make) round holding down bolts with nuts and washer plates complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMA of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm ( at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) dia of Supreme/Finolax/D-Plast/Vectus make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One Hundred millimetre) bend 87.5° (Eighty seven point five degree) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes (Supreme/Fenolax/D-plast/ vectus make) of 6kg/cm2 (Six kilogramme per centimetre square) pressure conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

SATISH KUMAR SHARMA

BALAL