Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹45.3 L+₹1.4 L (3.23%)Rejected-AOC WARD 17 JAIN TEMPLE ROAD JAIN TEMPLE ROAD DIMAPUR NAGALAND 797112 | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹45.9 L+₹2.0 L (4.46%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹46.1 L+₹2.2 L (4.97%)Rejected-AOC | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹46.3 L+₹2.4 L (5.46%)Rejected-AOC | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹43.3 L
EMD Value
₹86,620
Closing Date
22 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO P46 OF MH ADDN ALT OF CENTRE STAGE NEAR BLDG NO P 01
2023_MES_611857_1
8565/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(I)
2 documents required · 2 mandatory
₹500
Yes
GE 868 EWS
₹86,620
12 Sept 2023
3 Aug 2023
24 Aug 2023
3 Aug 2023
22 Aug 2023
17 Aug 2023
3 Aug 2023 - 10 Aug 2023
Amount
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) etc complete all as specified and as directed.
All as per item 1.00 here-in-above but exceeding 1.5 Sqm and not exceeding 4 Sqm each `
S&F size of frame 125 x 60mm Pressed steel frames(thickness of MS sheet 1.25 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.
M&L for 30mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 35mm thick factory made 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed.
S&F Anodised aluminium ( minimum thickness of powder coated 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F for anodised aluminium ( minimum thickness of powder coated 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.
S&F for steel ventilator with top hung shutter including hinges, steel peg stay,etc complete all as specified and as directed.
S & F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0, etc complete all as specified and as directed.
M&L for sheet glass 3mm thick ordinary quality, and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.
S & F 100 size stainless steel butt hinges complete all as specified and directed
S & F 75 size stainless steel butt hinges complete all as specified and directed
Supply & Fixing 150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed.
Supply & Fixing 100 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed.
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and as directed.
S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed.
M & L for rendering 5 mm thick in cement mortar (1:3) on fair faces of brick or concrete work even and smooth without using extra cement in ceiling etc complete all as specified and as directed.
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint incl primer complete all as specified and directed.
M/L for 2 mm thick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of primer including preparation of surface complete all as specified and directed.
M&L for Preparation of plasterded or un plastered new surfaces of ceiling and applying two coats of white wash over a coat of primer complete all as specified and directed.
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint etc complete all as specified and as directed.
All as per item No 28.00 here-in-above but applying two coats of synthetic enamel paint over a coat of pink wood primer on new wooden surfaces.
Demolition of Cement concrete of any description and in any position not otherwise specifically provided including removing demolished material off the premises for complete all as specified and as directed by the Engineer-in-Charge.
M&L for75 mm thick PCC (1:3:6) type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 ,75 mm thick (using 40mm graded stone agg) as in sub base of floor etc complete all as specified and directed.
M & L for chequered cement concrete tiles of Size 25mm thick of any description laid over and including 20mm thick screed bed in CM (1:6) jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed of 15 mm thick in CM (1:6) etc complete all as specified and directed.
All as per item No 35.00 here-in-above but laid over screed bed of 10 mm thick in CM (1:4) on vertical surface etc complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles , laid over and including 10mm thick in CM (1:4) backing coat etc complete all as specified and directed.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.
S & F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed.
M&Lfor cement concrete type C-2 (1:3:6), (using 40 mm graded stone agg) as in surface channels and drains etc complete all as specified and directed.
M&Lfor Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and directed.
Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, including removing demolished material off the premises etc complete all as specified and directed.
M&L for TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia etc complete all as specified and directed.
M&L for precast cement concrete type B-1 (1:2:4) (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar (1:6) including necessary formwok complete all as specified and directed.
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing etc complete all as specified and directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc complete all as specified and directed.
S&F steel tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and directed.
S&F steel tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and directed.
Supply and fixed in repair(pedestal pattern), vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover etc complete all as specified and directed.
S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified (Make Cera Cat No-F1020106 or equivalent make in Appx 'B' here-in-after) complete all as specified and directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.
S& F in repairs Pillar taps, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and directed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers etc complete all as specified and directed.
S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc complete all as specified and directed.
Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws etc complete all as specified and directed.
S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and directed.
S&F in repair 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and directed.
S&F in repair 75 mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and directed.
S&F of 110mm dia PVC (SWR) bends etc complete all as specified and directed.
S&F 75mm PVC(SWR) bends any radius with acess door etc complete all as specified and directed.
S&F of 75mm dia PVC (SWR) Vent cowl etc complete all as specified and directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and directed.
M&L dismantling water tank of exc 250 ltr and not exc 500ltr Capacity etc complete all as specified and directed.
S&F rotational moulded polyethylene 500 Ltrs Capacity double layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and directed.
S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc complete all as specified and directed.
M & L for block boards, 18/19 mm thick, grade 2 quality, interior grade , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required etc complete all as specified and directed.
Dismantling boarding of any description fixed in any position with nails etc complete all as specified and directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.
Dismantling Plain corrugated steel sheeting, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all specified and as directed.
S&F steel work in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all specified and as directed.
M&L for PCC (1:5:10) type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed.
M&L Plain Cement Concrete Type D2 (1:4:8) (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete etc complete all specified and as directed.
M&L for 25mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate mixed with & including WPC (in proportion as per manufacturer's instruction) as in bedding in sunken portion of slab complete all as specified and directed.
M&L for rendering 10mm thick plaster in cement mortar (1:3) mixed with and including water proofing admixture (in proportion as per manufacturers instructiion) as in sunken portion, finished the surfaces even and smooth without using extra cement complete all as specified and directed.
Dismantling Stone sett paving of any description or thickness etc complete all specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as 'specified and as directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc etc complete all specified and as directed.
M&L Brick work with sub class B bricks (old size burnt-bricks)straight or curved on plan exc 6.00 m mean radious built in CM 1:6 complete all as specified and directed etc complete all specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/loose soil etc complete all specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils etc complete all specified and as directed.
Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge.
(a) One light point controlled by one, one way switch .
(b) One Ceiling fan/ exhaust fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
(e) One bell point controlled by one, one way switch .
(f) One light point control by two way switch
All as per item No- 97.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
All as per item No- 97.00 here-in-before but with 4.0 Sq mm for 3 pin AC point and 4.0 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed.
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed.
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed.
M&L for Modular bell push switch 5 amps piano type flush type etc complete all as specified and as directed.
M&L for replacement of Bell AC 230 volts musical type.etc complete all as specified and as directed.
M&L for Modular Switch piano flush type single pole, two way 5A, 1 Module etc complete all as specified and as directed.
M&L for modular white cover plate with frame 1 module complete all as specified and as directed.
M&L for modular white cover plate with frame 2 module complete all as specified and as directed.
M&L for modular white cover plate with frame 3 module complete all as specified and as directed.
M&L for modular white cover plate with frame 4 module complete all as specified and as directed.
M&L for modular white cover plate with frame 6 module complete all as specified and as directed.
M&L for modular white cover plate with frame 8 module complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 114.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A.etc complete all as specified and as directed.
M&L for Switch Socket combination 2 in 1, 3 pin 5A complete all as specified and directed.
M&L for Switch Socket combination 2 in 1, 3 pin 5A/16A, 5 in 1 flush with fuse & neon incator complete all as specified and directed.
M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completecomplete all as specified and as directed.
Supply and fixing for Lycus LED Spike 9 Watt light environmental friendly , new generation, energy saving, decorative IP66 LED spike light using COB LED light source complete all as specified and as directed.
Supply and fixing for Spike light 5 Watt RGB multicolour IP 65 Protection complete all as specified and as directed.
Supply and fixing for LED Flexi Strip with LED Driver 24 Volts optimum brightness & uniformity of light for prefect cove lighting length of 5 Mtrs complete all as specified and as directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn through and including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- two runs of 6.0 Sq mm + one run of 6.0 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.
M&L for 20 W LED, 4', Wall mounted LED tube light fitting batten with LED single side or double side connection, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting including taking down old unsv light fitting complete all as specified and as directed.
M&L for 09 W LED, 2', Wall mounted polycarbonate batten internally pre-wired with electronic driver and polycarbonate diffuser and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting including taking down old unsv light fitting complete all as specified and as directed.
M&L in replacement for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv holder fitting complete all as specified and directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.
M&L for Bldg Security LED 1x20W light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting including taking down old unsv light fitting complete all as specified and directed
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make : Havells/CG/Bajaj/Philips
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan etc complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan/Exhaust Fan complete all as specifed and as directed.
M&L for Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type Set of two
M&L for Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs making good the distrubed surfaces of various rating capacity including taking down old unsv DB, complete all as specified and as directed.
Supply and fixing for AC starter motor single pole 25 amps 230 volt flush type complete all as specified and as directed. Make : Legrand/Havells/Siemens
M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.
M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.
Taking down of storage type water heater (Geyser) of 25/35/50 ltrs capacity, any make, vertical or horizontal type, mounted on wall by disconnecting electric and water supply connection and keeping the same in safe custody for carrying out necessary repair/replacement of UNSV parts/components including descaling of the geyser tank by using proper liquid chemical and re-assambling & refixing the same all as directed by the Engr-in-Charge. (Note: UNSV items for renewal shall be measured and paid seprately under respective itme here-in- after as supply only).
Supply & fixing following items for water heater and geyser of any type model and make all as directed by Engr-in-Charge.
Rubber washer for geyser fixing complete all as sp[ecified and as directed.
Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold/hot of set water line with adopter and washer at both ends of the pipe.
Indicator lamp round/rectangular complete all as specified and as directed.
Thermostat for geyser 30 to 75 degree centigrade. Make: Thecha/DasPass/Victor
Auto cut-off electric water heater geyser temperature controlling sensor any capacity complete all as specified and as directed.
Push type copper heating element of 1.5 KW capacity complete all as specified and as directed..
Glass wool in between outer cell and containercomplete all as specified and as directed.
Inner container for geyser of capacity 25 ltr, any make any type complete all as specified and as directed.
Assemblly for water heater 25 ltr capacity of any make and type complete all as specified and as directed.
S & F of metal fasteners of 12mm dia for fixing geyser complete as specified and as directed. Make : Anchor or equivalent as approved by GE.
M&L Distribution board double door type (for incoming MCCB 100 Amps 4 Pole & out going MCBs) DPX 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing only incoming MCCB and MCBs of various rating capacity including taking down old unsv DB of any capacity complete all as specified and as directed.
M&L for MCCB 4P, 415 Volts, adjustable type, 100 Amps with breaking capacity 16 KA, suitable for fixing in MCB DB including taking down old unsv MCCB complete all as specified and as directed.
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable
CHANDRADEO PRASAD
M/S MUNGA LAL PRASAD
MS SADHNA RAHUL
sanjay kumar
SAYED ALI AND SONS
Rameshwar Prasad
M/S SANGITA TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .