Construction of Civil Hospital Bahadurgarh (Jhajjar) from 100 Bedded to 200 Bedded (Providing 1250 KVA Sub Station only)

Amount

20.89 Designing, Supply & Erection of DG Set of capacity given below with noise controlled devices, acoustic rating, testing and commissioning of diesel generating set, radiator cooled 3 phase 4 wire 50 cycles 415 + (-) 1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over /AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover / standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG set complete as per following detailed scope and specifications and directions of Engineer-in-Charge. The rating should be at 1500 RPM Make: - Kirlosker / Cotton Greaves / Cummins

Diesel Engine

Alternator

Battery 24 V

Base Plate

suitable Sqmm suitable core copper cable upto 40 meters

Tools, standard panel

Metering set 415 VAC-1 set (Amp. Meter, Volt Meter, ASS, VSS, Phase Indicator, Control Fuse, Frequency Meter, CT's)

Metering set 60/5A/110V (Amp. Meter, Volt Meter)

Overload protection for DC-1 No.

Battery Charger 24 V DC

Copper Bus Bar of Suitable Size

KWH meter 96 Sqmm size

Starting fuse button and key switch on / off

Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, DC control and other required accessories complete in all respect to the satisfaction of Engineer-in-Charge

20.89.12 360 KVA DG Set

23.22.8 SITC Four Pole on Load Manual Change Over Switch in SS enclosure of following ratings

23.22.8.5 400 Amp. 415 volts

24.1 Earthing and Lightening Arrestor

24.1.4 Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

24.1.5 Extra for charcoal or coke and salt for G.I. Plate or Copper plate earth electrode.

24.1.9 Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

24.1.10 Pdg. and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

24.2.7 Supply and Erection of suitable compression type brass cable glands for underground cable:

24.2.7.5 120 Sqmm. to 185 Sqmm Cable 3 to 3.5 Core

24.2.7.6 240 Sqmm. 3 to 3.5 Core

24.2.7.7 300 Sqmm. to 400 Sqmm. 3 to 3.5 Core

24.3.3 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

24.3.3.1 70 to 120 sqmm

24.3.4 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

24.3.4.1 70 to 120 sqmm

24.5 Miscellaneous Items

24.5.2 Supply and erection of mark double walled corrugated (DWC) HDPE, pipe 10 Kg / Cm2, laid 0.75 meter below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. .

24.5.2.6 DWC/HDPE pipe 145/123 mm outer dia/inner dia.

24.5.2.7 DWC/HDPE pipe 180/150 mm outer dia/inner dia.

24.7 RCC Foundations for DG Set

Providing RCC foundation of M 20 grade (1 Cement: 1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 Kg/cum of concrete contents, concrete cover 50 mm, over a bed of 75 mm thick PCC 1:5:10 of required dimensions as per OEM recommendations to provide leveled surface for placement of the DG set complete in all respect and as per directions of Engineer-in-Charge

24.7.6 400 KVA DG Set

M. R. ITEMS

APFC PANELS (400 KVAR)

NS-1 Design, fabrication, supplying, assembling, erecting, connecting, testing and commissioning of floor mounted cubical type compartmentalized dust, damp & vermin proof capacitor panel Make Dhillon Fabricator, Sudhir / C&S Electric fabricated out of suitable sized angle iron and flats and covered with 2mm thick cold rolled CRCA sheet painting etc. complete with copper bus bars, interconnection as required with solid/stranded copper conductor wires copper strips neutral links, etc.

Necessary solid state binary type power factor sensing and correction relay (14 stages) complete with CT.s and its all other accessories etc. as required.

800 Amp MCCB 4 Pole - 50 KA with TMR for (O/C, S/C) protection 1 No. Make: - L&T / C&S / Siemens / ABB

Spreader Terminal 1 No.

Extended Rotary Handle 1 No.

Digital Amp Meter , Class-1.0, 96X96 Sqmm 1 No.

CTs 800/5A, Class-1.0, 15VA {Cast Resin} For Metering 3 Nos.

14 Stage APFCR Relay, Sensing 415Vac, Built-in PF Meter, CTR -/5A, 144 Sq Mm Aux, Supply 220Vac 1 No. Make: -L&T/HPL

R/Y/B Phase Indicating Lamps (LED TYPE) 3 Nos.

Exhaust Fan 220Vac, 1 No. Reputed Make

6A, SP, MCB, 10KA For Control Ckt. 4 Nos. Make: -L&T/C&S/Siemens/ABB

6A Neutral Link Dropout Type, For Control Ckt. 3 Nos.

5 KVAR Capacitor Banks :- 01 No's

MCB 16 A, TP 10 KA 'C' Curve 1 No. L&T / C&S

Capacitor duty contractor 5 KVAR 240 Vac 1 No. L&T / C&S

5 KVAR Capacitor Bank MPP (Standard Duty) 440 Vac 1 No. Make Epcos

ON-OFF Indicating Lamps (LED TYPE) 2 Nos. Make Esbee

Start Stop Push Button 2 Nos. Make Esbee

10 KVAR Capacitor Banks :- 02 No's

MCB 32 A, TP 10 KA 'C' Curve 2 Nos. Make L&T/C&S

Capacitor duty contractor 25 KVAR 240 Vac 2 Nos. L&T / C&S / Siemens / ABB

10 KVAR Capacitor Bank MPP (Standard Duty) 440 Vac 2 Nos. Make Epcos

ON-OFF Indicating Lamps (LED TYPE) 4 Nos. Make Esbee

Start Stop Push Button 4 Nos. Make Esbee

25 KVAR Capacitor Banks :- 05 No's

MCB 63 A, TP 10 KA 'C' Curve 5 Nos. Make L&T / C&S

Capacitor duty contractor 25 KVAR 240 Vac 5 Nos. Make L&T / C&S

25 KVAR Capacitor Bank MPP (Standard Duty) 440 Vac 5 Nos. Make Epcos

ON-OFF Indicating Lamps (LED TYPE) 10 Nos. Make Esbee

Start Stop Push Button 10 Nos. Make Esbee

50 KVAR Capacitor Banks :- 05 No's

125 A 3 P+NL MCB 25 KA with TMR for {O/C, S/C} Protection 5 Nos. Make L&T / C&S

Spreader Terminal 5 Nos. Make L&T / C&S

Capacitor duty contractor 50 KVAR 240 Vac 5 Nos. Make L&T / C&S

25 KVAR Capacitor Bank MPP (Standard Duty) 440 Vac 10 Nos. Make Epcos

ON-OFF Indicating Lamps (LED TYPE) 10 Nos. Make Esbee

Start Stop Push Button 10 Nos. Make Esbee

BUSBAR - Main Bus Bar

TPN Copper busbar made from Electrical Grade

Copper flats (E-91-E) 600 AMP Duly supported

on DMC insulators & covered with heat shrinkable sleeves.

Enclosure, Bus Bar & Wiring & Accessories

MS Cabinet with integrated Base Frame & Powder Coated Paint

Hardware and Accessories - Nuts, Bolts, Washers

Door Hinges and Locks, Neoprene Rubber Gaskets.

Mounting Plates, MS Channels, Partitions, Lifting Hooks & Gland Plates.

PVC Wires, Ferrules Thimbles & Other Wiring Accessories.

Consumables, Design and Development, Drawings

Manufacturing Cost i.e. Fabrication, Painting, Bus Bar

fitting, Handling & fitting of switchgears.

NS-2 Supply, erection, testing and commissioning of outdoor type copper wound, transformer of 1250 KVA 11 / 433 KV, 3 Phase, 50 Hz complete in all respect upto the entire satisfaction of Engineer-in-charge of work ( on existing pole / plateform including first filling of oil conforming to IS 1180 Part-II) Make : Kirloskar, Cotton Greaves, NGEF and Volt Amp.

Standard / Type IS 2026 Part 14 Hybrid Insulation Converter Duty Transformer. Insulation Class E/A/B

Service Continuous Yes / / Outdoor

KVA Rating 1250 KVA Copper Wound

Rates Voltage 11000 / 0.433

HSV on HV Side 12 KV

Rated Frequency Hz 50 HZ (+ 3%)

Connections A) HV Delta B) LV Star

No. of Phases 3

Connection Symbol Dyn 11

Variation HV Variation

Off Circuit Tape Changer + 5 - 10% @ 2.5%

Ref Ambient Temperature 50 degree C

Type of Cooling ONAN

Temperature Rise in Oil / Windings 40 degree C / 45 degree C

Losses in Watts: IS Tolerance Applicable … No Load @ rated Voltage + Load Loss @ Rated Current: Total Losses as per IS 1180-Level-2 @50%Below-3300W @100% Below - 9200 W

Impedance Volt. @ Normal Tapping % (IS Tol Applies) 6.25%

Induced Over Voltage in KV A) HV 22 KV B) LV 0.866 KV

Equipment for ONAN Cooling Radiators Mounted on Tank Yes

Terminal Arrangement A) HV Cable Box - 1800 B) LV Cable Box - 1800

Bus Bar Extension & Flexible in Customer Scope

Core Material CRGO M4 0.27 MM or Better

Accessories: 150 MM OTI Double Potential Free Contacts 150 MM WTI Double Potential Free Contacts PRV Buchholz Relay with Shut - Off Valve Magnetic Oil Level Guage Radiators - Detachable Silica - Gel - Breather BI-Directional Rollers - 4 Nos. Marshalling Box with space Heater + Thermostat + Bulb + Socket + MCB Lifting Lugs Rating & Diagram Plate Air Release Plus Earth Terminals - 2 Nos. + AllStandard Accessories

LV Neutral Position Brought - Out ON Tank

Altitude With - IN 1000 M

Paint Shade 631 OF IS-5, Matt Finish Paint

Transformer IS - 2026 - 14

Oil - Mineral Oil IS: 335

Bushing IS - 2099 / IS - 3347 / 8603

Type of Bushing A) HV 17.5 KV / 250 AMPS Porcelain Bushing B) LV 1.1 KV 2000 AMPS Epoxy Bushing

Silica - Gel Breather Provided

Cable Boxes Removable without disturbing Core Coil Assembly? Yes

Extra Oil for First Filling of Oil Included / Provided

Insulation Level of Transformer 28 KV / 75 KVP / 3 KV

Special Features

Sealed Breathings System (Keeps T/F Isolated Atmospheric Moisture) Provided

On Line Oil Purifier (Extracts All Moisture Generated Inside the Transformer, due to Chemical Reactions) The main Transformer will not require oil filtration for 20 years if operated as per our guidelines Provided

Magnetic Circuit brought out and tested at 5 KV Provided

Jacking Screws Provided

Winding Auto Tightening System (Saving on periodic maintenance and outage prevented) Provided

TERMINATION

HV-3 Pole single glands cable box suitable for reception of one No. 3 core upto 120 sqmm HT XLPE cable including compound for filling the cable end box with copper lugs / thimble.

LV- 4 Pole 3 glands cable boxes suitable for 3 Nos. 500 sqmm 3.5 core Polyvinyl chloride cable having extended copper bars of requisite Capacity from LT bushing for making connections with cable including cost of copper lugs, thimbles LV: Neutral suitable cable Box for earthing provided.

NS-3 Supply, erection, testing and commissioning of 11 KV, 630 Amps. Non - Extensible indoor fixed type, RMU (Ring Main Unit) 3 way comprising of 3 Nos. 630 Amps, Vaccum Circuit Breaker (Comprising One No. Incomer and Two Nos. Outgoing) as per specification: Make : ABB / Schinder/Siemes/Voltamp

Incoming Feeder

11 KV ,630A,TP EDO , 26.3 KA Vaccum Circuit Braicker with Following Accessories Make : L&T/ABB / Schinder 3 Nos.

Spring Charge Motor 230Vac

Shunt Trip Coil 24 Vdc

Closing Coil 24 Vdc.

Auc Contact 3 No + 3 Nc

Manual Operation Counter

Safety Shutter

Machenical On -Off Push Button

Machenical On -Off Indication 24Vdc.

Manual Spring Charge Handel.

Breaker Control Switch, 16A 2 Pole, 2 Way With Off Salzer Make 3 Nos.

Protection Relays

3 Phase Microprocessor Based Feeder Protection Relay (ANSI 50+50N,51+51N) with RS-485 Ashida / Awana Make 3 Nos.

Master Trip Relay (ANSI 86) Ashida / Awana Make 3 Nos.

Aux Relay for Transformer Protection. Ashida / Awana Make 6 Nos.

Metering & Instrument Transformer

Multifunction Meter With RS-485 Communication Port, Class-1.0, 96X96 Sqmm (EM6400) L&T / Secure Make 1 No.

Digital VAF Meter Class-1.0, 96X96 Sqmm L&T / Secure Make 2 Nos.

Current Transformer Dual Ratio Dual Core WPL Type Core -1 :- 100-50/5 ,CL-0.5 15 VA for Metering Core -2 :- 100-50/5 ,CL 5P10,15VA for Protection Krishna Make 3 Nos.

Pptential Transformer Dual Core Resin Cast Fixed Type with Fuse Ratio :- 11kV/r3/110V/r3, 100VA Krishna Make 3 Nos.

Indication Lamp & Accessories.

Auxiliary Contactor 2NO+2NC Contacts, 24Vdc L&T Make 3 Nos.

ON/OFF/TRIP/SC Indicating Lamps (LED TYPE) 24Volt DC Esbee Make 12 Nos.

R/Y/B Phase Indicating Lamps (LED TYPE) (63.5Volt) Esbee Make 3 Nos.

Emergency Mashroom Head Push Butoon Esbee Make 3 Nos.

Illuminated Push Button 110Volt DC Esbee Make 3 Nos.

Toggle Switch 10A,240Vac Reputed Make 3 Nos.

6A, SP, MCB, 10KA For Control Ckt. L&T Make 15 Nos.

20A, DP, MCB, 10KA For Control Ckt. L&T Make 2 Nos.

6A, DP, MCB, 10KA For Control Ckt. L&T Make 12 Nos.

Hooter 24Volt DC Reputed Make 3 Nos.

Space Heater 80 Watt 230Volt AC Reputed Make 3 Nos.

Thermostate 30-85°C Single Change over Reputed Make 3 Nos.

Combined Box 16A ,3Pin Single Phase Reputed Make 3 Nos.

Panel Illumination Light with Door Limit Switch Reputed Make 3 Nos.

CT Terminal Block 6MM Salzer Make 54 Nos.

PT Terminal Block 6MM Salzer Make 54 Nos.

End Plate Salzer Make 6 Nos.

32A Neutral Link Dropout Type, For Control Ckt. Technika Make 3 Nos.

BUSBAR - Main Bus Bar

TPN Aluminium busbar made from Electrical Grade

Aluminium flats (E-91-E) 400 AMP Duly supported

on DMC insulators & covered with heat shrinkable sleeves.

Enclosure, Bus Bar & Wiring & Accessories

MS Cabinet with integrated Base Frame & Powder Coated Paint

Hardware and Accessories - Nuts, Bolts, Washers

Door Hinges and Locks, Neoprene Rubber Gaskets.

Mounting Plates, MS Channels, Partitions, Lifting Hooks & Gland Plates.

PVC Wires, Ferrules Thimbles & Other Wiring Accessories.

Consumables, Design and Development, Drawings

Manufacturing Cost i.e. Fabrication, Painting, Bus Bar

fitting, Handling & fitting of switchgears.

INCOMING:- 1 No. 2000 Amp. ACB four pole 50 KA of Havells/L&T/ Siemens / GE fully interlocked horizontal draw out type manually operated complete with under voltage release, shunt trip and suitable size of cable chamber with compression type glands to receive incoming cables in sheet steel cubical electrical and Mechanical interlocked for safety purposes between incoming ACB and Bus coupler ACB to prevent switching On of Bus coupler breaker when both the incoming breakers are ON, suitable for operation on 400/440 Volts 3 Phase 4 wires 50 Cycles A.C. Supply with 2 Nos. ( NC + No ) auxiliary contacts and each comprising of :- Make: - L&T/C&S/Siemens/ABB

Spreader Terminal 1 No. Make: - L&T / C&S / Siemens / ABB

Extended Rotary Handle 1 No. Make: - L&T / C&S / Siemens / ABB

Digital Amp Meter , Class-1.0, 96X96 Sqmm 1 No.

Digital Volt Meter , Class-1.0, 96X96 Sqmm 1 No.

CTs 2000/5A, Class-1.0, 15VA {Cast Resin} For Metering 3 Nos.

R/Y/B Phase Indicating Lamps (LED TYPE) 3 Nos.

6A, SP, MCB, 10KA For Control Ckt. 3 Nos.

6A Neutral Link Dropout Type, For Control Ckt. 1 No.

OUTGOING FEEDER: - 1 No.

1250 A 4P EDO ACB 50 KA with microprocessor based release for {O/C, S/C} protection, 4 NO + 4 NC Aux. Contacts, Micro Switch 1 No. Make : Make: - L&T/C&S/Siemens/ABB

Aux. Trip Contract for ACB 1 No. Make: - L&T/C&S/Siemens/ABB

Breaker Control Switch, 16 Amp 1 No. Make Salzer

ON / OFF Indicating Lamps (LED TYPE) 2 Nos. Make Esbee

6A, SP, MCB, 10 KA for Control Ckt. 4 Nos. Make: - L&T/C&S/Siemens/ABB

6A Neutral Link Dropout Type, for Control Ckt. 2 Nos. Make Technika

OUTGOING FEEDER: - 1 No.

800 A 4P MCCB 50 KA with Thermal Magnetic Release for {O/C, S/C} protection 1 No. Make: - L&T/C&S/Siemens/ABB

Extended Rotary Handle 1 No. Make: - L&T/C&S/Siemens/ABB

OUTGOING FEEDER: - 2 Nos.

500 A 4P MCCB 50 KA with Thermal Magnetic Release for {O/C, S/C} protection 2 Nos. Make: - L&T/C&S/Siemens/ABB

Spreader Terminal 4 Nos. Make: - L&T/C&S/Siemens/ABB

Extended Rotary Handle 2 Nos. Make: - L&T/C&S/Siemens/ABB

OUTGOING FEEDER: - 1 No.

100 A 4P MCCB 25 KA with Thermal Magnetic Release for {O/C, S/C} protection 1 No. Make: - L&T/C&S/Siemens/ABB

Spreader Terminal 2 Nos. Make: - L&T/C&S/Siemens/ABB

Extended Rotary Handle 1 No. Make: - L&T/C&S/Siemens/ABB

BUSBAR - Main Bus Bar

TPN Copper busbar made from Electrical Grade

Copper flats (E-91-E) 800 AMP Duly supported

on DMC insulators & covered with heat shrinkable sleeves.

Enclosure, Bus Bar & Wiring & Accessories

MS Cabinet with integrated Base Frame & Powder Coated Paint

Hardware and Accessories - Nuts, Bolts, Washers

Door Hinges and Locks, Neoprene Rubber Gaskets.

Mounting Plates, MS Channels, Partitions, Lifting Hooks & Gland Plates.

PVC Wires, Ferrules Thimbles & Other Wiring Accessories.

Consumables, Design and Development, Drawings

Manufacturing Cost i.e. Fabrication, Painting, Bus Bar

fitting, Handling & fitting of switchgears.

NS-5 Supply & erection of underground cable loose in existing pipe or trenches complete in all respect upto the entire satisfaction of Engineer in charge of the work. Make KEI / Havells / Polycab / Gloster

240 Sqmm 3.5 core Ard. Cable

300 Sqmm 3.5 core Ard. Cable

400 Sqmm 3.5 core Ard. Cable

500 Sqmm 3.5 core Ard. Cable

NS-6 Supply & erection of XLPE (E) 11 KV HT alluminium armoured cable ISI marked in existing pipe/trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of engineer in charge of the work. Make KEI / Havells / Polycab / Gloster

i) 120 sqmm 3 core XLPE cable

NS-7 Providing RCC foundation of M 20 grade (1 Cement: 1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 Kg/cum of concerete contents, concrete cover 50 mm, over a bed of 75 mm thick PCC 1:5:10 of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respect and as per directions of Engineer-in-Charge(Size of foundation assumed = 5.0x1.8x1.0m) Unit: Per Cum (Based on HSR 24.7)

NS-8 Supply and erection of Fire extinguisher ISI mark Co2 type of 4.5 Kg. capacity as per IS 7285 duly erected / hung on wall with hooks with all labour & petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

NS-9 Supply & Erection of MS Bucket Stand made of 32 x 5 mm angle iron / channel iron suitable for 6 Nos. fire bucket including cost of 6 Nos. bucket, welding & painting of complete stand with one coat of red oxide and two coats of approved paint of red color with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.

NS-10 Supply and erection of Rubber Mat of size 2m x 1 m x 12 mm thick suitable for 11 KV complete in all respect make & model approved by Chief Electrical Inspector.

NS-11 Providing and fixing of wire mesh jali around the transformer of size 4'x 8' made out of 75 x 25 x 3.25 mm jali fixed with angle iron frame made out of M.S. angle 50 x 50 x 6 mm support of M.S. flat 50 x 6 mm and fixed in C.C. Block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer-in-Charge.

NS-12 Erection of MS Angle 50 x 50 x 6 mm, M.S. flat & nuts & bolts including cutting, bending to the required shape drilling holding carriage, painting loading & unloading complete in all respect.

M/S PANJETA ELECTRICALS