Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC R O VILLAGE NANGAL UPRLA P O NANGAL TEHSIL NALAGARH DISTT SOLAN HP | SOLAN | HIMACHAL PRADESH | 171102 | L1 | Accepted-AOC AOC done | |
| 2 | L2₹10.4 L+₹4,297.60 (0.42%)Rejected-Finance | L2 | Rejected-Finance Due to L2 bidder | |
| 3 | L3₹10.7 L+₹34,580.31 (3.35%)Rejected-Finance | L3 | Rejected-Finance Due to L3 bidder | |
| 4 | L4₹10.9 L+₹52,220.80 (5.05%)Rejected-Finance | L4 | Rejected-Finance Due to L4 bidder | |
| 5 | L5₹11.2 L+₹87,229.90 (8.44%)Rejected-Finance | L5 | Rejected-Finance Due to L5 bidder |
Tender Value
₹12.2 L
EMD Value
₹24,400
Closing Date
27 Feb 2023, 11:00 amClosed
EE
Nalagarh
.
2023_PWD_69197_1
13946-50 dated 14-02-2022
Open Tender
Civil Works
Item Rate
90 days
Nalagarh
6 documents required · 6 mandatory
₹500
₹24,400
15 Nov 2023
17 Feb 2023
27 Feb 2023
17 Feb 2023
27 Feb 2023
17 Feb 2023
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing plain multipurpose cementboard(Hight pressure steam cured) with suitable screwsfor cement particle board in ceiling etc. complete (framework to be paid seperatately). 6 mm thick Cement fiber board as per IS:14862 including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Earth work in excavation by mechanical means(Hydraulic excavator) / manual means in foundationtrenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m. all kind of soil and Soft rock, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 stone aggregate 40 mm nominal size) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinthement mortar 1:6 (1 cement : 6 coarsesand)With F.P.S.(non modular) bricks , including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Centering and shuttering including strutting, proppingetc. and removal of form work for :Foundations, footings, bases for columns including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and laying in position specified grade ofreinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - Allwork up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3graded stone aggregate 20 mm nominalsize, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Steel reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in position andbinding all complete upto plinth level, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Precast terrazo tiles 22 mm thick with graded marblechips of size upto 12 mm, laid in floors, and landings,jointed with neat cement slurry mixed with pigment tomatch the shade of the tiles, including rubbing andpolishing complete, on 20 mm thick bed of cementmortar 1:4 (1 cement:4 coarse sand)Medium shade pigment using 50% whitecement and 50% ordinary cement , including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Precast terrazo tiles 22 mm thick with graded marblechips of sizes upto 12 mm, in skirting and risers of stepsnot exceeding 30 cm in height, on 12 mm thick cementplaster 1:3 (1 cement : 3 coarse sand), jointed with neatcement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tileMedium shades pigment using 50% whitecement and 50% ordinary cement , including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Tile work in skirting, risers of steps and dado up to 2 mheight over 12 mm thick bed of cement mortar 1:3 (1cement :3 coarse sand) and jointed with grey cementslurry @ 3.3 kg/sqm, including pointing in white cementmixed with pigment of matching shade complete.11.22.1.1 8 mm thick, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore metre 225.50, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing brass bib cock of approved quality :15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing ball valve (brass) of approvedquality, High or low pressure, with plastic floats complete18.18.1 15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing brass bib cock of approved quality :15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, includinflush pipe, with manuallycontrolled device (handlelever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good thewalls and floors wherever required : W.C. panwith ISI marked white solid plasticseat and lid, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings anbrackets, cutting and making good thewalls whereverrequire:White Vitreous China Wash basin size630x450 mm with a single 15 mm C.P.brass pillar tap, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing white vitreous china laboratory sinkwith C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, includingpainting of fittings and brackets, cutting and makinggood the wall wherever required : Size 600x450x200 mm including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing P.V.C. low level flushing cistern withmanually controlled device (handle lever) conforming toIS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete.17.28.1.1 17.28.1.1 32 mm dia including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing uplasticised PVC connection pipewith brass unions 18.21.2 45 cm length 18.21.2.1 15 mm nominal bore including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings 110mm including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
75mm dia
Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing 600x120x5 mm glass shelf withedges round off, supported on anodised aluminiumangle frame with C.P. brass brackets and guard railcomplete fixed with 40 mm long screws, rawl plugs etc.,complete including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing P.V.C. Floor trap I.S.I marked of self cleaning design with PVC pipe complete 110 and 90 mm dia including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing P.V.C. Door bend of required degree(any radius) I.S.I marked with oval access door insertion rubber washer 3(Three) complete . 100 mmdia including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing 110 mm ( One hundred ten millimeters) nominal bore PVC Plain Bends ISI marked including fixing with approved adhesive complete as per direction of the Engineer-in-Charge and HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental 100mm dia
Providing and fixing 110 mm ( one hundred ten millimeter) diameter PVC cowl I.S.I marked including cutting holes in walls and making good the same, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .
15 mm cement plaster on the rough side of single or halfbrick wall of mix :13.2.2 1:6 (1 cement: 6 fine sand including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Finishing walls with water proofing cement paint ofrequired shade :New work (Two or more coats applied @3.84 kg/10 sqm including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Applying priming coat:With ready mixed pink or Grey primer ofapproved brand and manufacture on woodwork (hard and soft wood including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brandand manufacture, including applying additional coatswherever required to achieve even shade and colour including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Finishing with Epoxy paint (two or more coats) at alllocations prepared and applied as per manufacturer’sspecifications including appropriate priming coat,preparation of surface, etc. complete. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 gradedstone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and laying 60mm thick faciory made cementconcrete interlocking paver block of M -30 grade madeby block making machine with strong vibratorycompaction, of approved size, design & shape, laid inrequired colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the jointswith line sand etc. all complete as per the direction ofEngineer-in-charge.
Constructing masonry Chamber 30x30x50 cm inside, inbrick work in cement mortar 1:4 (1 cement :4 coarsesand) for stop cock, with C. I. surface box 100x100 x75mm (inside) with hinged cover fixed in cement concreteslab 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size), i/c necessaryexcavation, foundation concrete 1:5:10 ( 1 cement : 5fine sand : 10 graded stone aggregate 40mm nominalsize ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with afloating coat of neat cement complete as per standarddesign : including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
P/F PVC water storage tank including 1000 ltr Capacity. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
Providing and fixing PTMT towel ring trapezoidal shape215 mm long, 200 mm wide with minimum distances of37 mm from wall face with concealed fittingsarrangement of approved quality and colour, weighingnot less than 88 gms including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.
MAYUR KHAN
SHYAM LAL GOVT CONTRACTOR
ranjit singh
SOM NATH THAKUR
KRISHAN LAL
VIRENDER SHARMA
JITENDER KUMAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .