COMPREHENSIVE REPAIR OF BOUNDARY WALL FENCING HARDSTANDING INTERLOCKING CHEQUERED TILES RETAINING WALL DRAINS AND OTHER MISC ITEMS UNDER AOR OF AGE BR DETT B OF GE 862 EWS

Amount

M&L for machine pressed precast concrete interlocking paver block of 60mm thick, M-35 grade, single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to (IS:15658-2006) in equal propotion of grey and coloured tile to make a pattern as directed, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, including dismantling of old paver block, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of 80mm thick, M-35 grade, single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to (IS:15658-2006) in equal propotion of grey and coloured tile to make a pattern as directed, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, including dismantling of old paver block, complete all as specified and directed.

M&L for coloured chequered cement concrete tiles of size 30cmx30cmx25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar 1:6 after dismantling of old unserviceable tiles etc and removing rubbish off the premises, complete all as specified and as directed.

M&L for digital vetrified exterior parking tile 600 x 600mm and 12 mm thick of any colour pattern (colour approved by GE) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to matched, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, including removing rubbish off the premises, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone graded stone aggregate) as in sub base for tiling, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4, type B-2 using 40mm graded crushed stone aggregates as in hard standing and footpath, complete all as specified and directed.

M&L for 25mm thick cement concrete typ B-1 1:2:4 (20mm grade stone aggregate) as in finishing cement concrete surface even and smooth (without using extra cement), complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically described and removal of debris/ concrete from site, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including necessary form work, complete all as specified and directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in copings/ benching and side locking tiles including necessary form work, complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4, type B-1 (using 20mm grade crushed stone aggreagte) as in landing, cover slab, manhole cover, chajjas etc and similar articles with plain faces, set in cement mortar 1:6 including demolition of RCC of any description and in any poistion, complete all as specified and directed.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-W as in columns or beams, complete all as specified and directed.

Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar, complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per Item No 16.00 here-in-before, but except bricks.

Demolition of RCC of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in soft/loose soil, for foundation, etc, or for shafts, wells, drain pipes n.exc 10 Sqm on plan and getting out, complete all as specified and directed.

M & L for providing RCC design mix of grade M-25, using 20 mm graded stone aggregate, as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like, complete all as specified and directed.

M & L for providing RCC design mix of grade M-25, using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M & L for providing RCC design mix of grade M-25, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts and struts, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness, complete all as specified and directed.

Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft and raft beams, side and soffits (if any) of foundation and plinth beams and similar work, verticial or to batter rough finished flat surfaces of concrete,, complete all as specified and directed.

M & L for use and waste of form work to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat, complete all as specified and directed.

M & L for use and waste of form work to sides and soffits of loor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc rough finished surfaces of concrete flat, complete all as specified and directed.

All as per item No 14 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, complete all as specified and directed.

S&F in repair galvanized 2 strand, steel barbed wire 2.24mm dia with 2mm barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specifed and directed.

S&F in repair concertina coil 1050mm dia, 56 loop, 2.5mm core wire heavy galvanized (wire-275 GSM & strip-200GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, strechable length 12M including securing or typing at crossings with and provisoin of galvanised mild steel wire, staples or steel pins etc, complete all as specifed and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling of post or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Excavation in post holes (or similar holes) each, n.exc 0.5m cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm watering and removing surplus soild to a distance n.exc 50m and making good surface in soft/loose soil, complete all as specified and directed.

S&F angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting,e tc and grills and grating and for iron frame works similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M & L for preparation of new steel surfaces over 10cm width or girth not otherwise description and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

S& F for galvanised iron chain link fencing with 3.8mm to 4mm dia wire mesh size 100mm x 100mm (as per sample approved by GE) complete after dismantlling of old unserviceable chain link fencing of any type, complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone wall surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick on stone walls or other than fair faces of brick walls in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 20 mm thick on stone surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices etc and applying two coats of exterior all weather proof paint of Apex Ultima of ASIAN or equivalent make of any approved two or more colour pattern as specified by GE over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment on wall surface, preparation of plastered or unplastered or untreated wall surfaces including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of any approved two or more colour pattern as specified by GE over and including a coat of primer, complete all as specified and directed.

S&F of 2mm thick fibre reinforced polymer sheet having tensile strength of 550 Mpa as in roof or wall cladding or view cutter of approved colour fixed with self tapping screws including dismantling of old sheet, complete all as specified and directed.

M&L for stone walling random rubble, uncoursed, well bonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed.

All as per item No 43.00 here-in-before but except stone, complete all as specified and directed. Note:- Stone retrieved from Item No 15 will be reused.

M&L for plain cement concrete type B-1, type 1:2:4 (using 20mm graded crushed stone aggregate) as in quoilin blocks/strings courses/coping/kneelers/ apex stone/bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for plain cement concrete, type C-1, 1:3:6, (using 20mm graded crushed stone aggregate) as in bond stone in stone walling, complete all as specified and directed.

Extra over stone walling for hammer dresing for lime sand stone n.exc 20 mm deep when held against st edge, complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, un coursed or brought up to courses in cement morter 1:4, complete all as specified and directed.

M&L for broken stone or boulders hand packing (any thickness) at back of wall over arches etc and raising (or lowering) to the required level, complete all as specified and directed.

Supply and fixing 75mm PVC (SWR) pipes single socketed in any length with rubber ring, joints laid in trenches or in floors, complete all as specified and directed

KANWAL KUMAR GUPTA (BID ID -3401783)

M/s Parvesh Gupta (BID ID -3404235)

M/S Ramesh Chander Gandotra & Sons (BID ID -3400069)

M/S IMRAN MAJID (BID ID -3394747)