REPAIR AND PAINTING OF STEEL FURNITURE AND REPLACEMENT OF PARTS IN STEEL FURNITURE AT ALL UNITS MD AND OTM ACCN INCLUDING MAP ACCNS UNDER GE GOLCONDA

Amount

Chair tubular steel with arms (FD-75) Removing of damaged / unserviceable seat from chair tubular steel with Arms and supply and fixing new seat made out of first class teak wood well seasoned wood of 460 mm x 415 mm x25 mm size and canned the chair with 2 mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers canning of chairs should be of Godrej Pattern Only, all first class teak wood material should be of glossy finish and edges should be curved from all sides,Rest all as directed and specified. FD-75.

Chair tubular steel with out arms {FD-75(M)} Removing of damaged / unserviceable seat from chair tubular steel without Arms and supply and fixing new seat made out of first class teak wood well seasoned wood of 460 mm x 415 mm x25 mm size and canned the chair with 2 mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers canning of chairs should be of Godrej Pattern Only, all first class teak wood material should be glossy finish and edges should be curved rest all as directed and specified. FD-75.

Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable back from chair tubular steel with Arms and supply and fixing new back of size 460mm x 415mm made out of first class hard and canning the chair back with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed.

Chair tubular steel with out arms {FD-75(M)} Removing damaged/ unserviceable back from chair tubular steel with out arms and supply and fixing new back of size 405mm x 380mm made out of first class hard and canning the chair back with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed.

Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable arms from chair tubular steel with arms and supply and fixing new arms made out of first class hard wood with suitable size of screws including painting the wooden surface with two coats of first quality black synthetic enamel paint over a coat of primer complete all as specified & directed and shown on drawings.

Removing damaged/ unserviceable rubber bush to the bottom of the chair tubular steel with Arms and with out arms and S & F with new synthetic rubber bush of size as per existing with suitable size of screw as per drawing all as specified and directed. FD- 75 & 75(M)

M & L for painting one coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel with arms (FD-75) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel with arms (FD-75).

M & L for painting one coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel without arms (FD-75M) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel without arms (FD - 75M).

Chair Verandah (FD-19/256/359) Removing damaged/ unserviceable cane plastic from chair varandah, cleaning and preparing tubular surface & painting with 2 coats of first quality synthetic enamel paint white over a coat of red oxide primer and finally recanning the chair varandah with 4mm wide new plastic cane as per Godrej Pattern/ drg and providing new rubber shoes for all four legs as per drawing and as directed.

Locker Bed Side Steel (FD-1029) Removing unserviceable handle and S & F new SS handle 'D' type 100mm long complete all as specified & directed and as shown on drg.

Locker Bed Side Steel (FD-1029) Removing unserviceable hasp & staple and S & F new MS hasp & staple75mm long complete all as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) Removing unserviceable hinges and S & F new MS hinges 75 mm long complete as specified & directed and as shown on drg.

Locker Bed Side Steel (FD-1029) Removing old unserviceable leg and S & F new leg of size 440x70x100 mm made out of MS sheet 1.25 mm thick, made to shape and fixing in the same position by welding including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) Removing old unserviceable shelf carefully and S & F new shelf made out of MS sheet 1mm thick made to shape and fixing the same properly in position including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) Removing old unserviceable door single leaf carefully and S & F new door single leaf made out of MS sheet 1mm thick made to shape & size and fixing the same properly in position including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) M & L for painting one coats of synthetic enamel paint of approved shade both internally and externally to Locker Bed Side Steel of MES pattern including Removing dents applying putty to level the surface before painting all as specified & directed and shown on drawings.

Almirah Steel Medium/ Small (FD-350/1032/1034) Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large and medium all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected (For one clip).

Removing old u/s cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet made to suitable for locking device complete all as specified/ directed and shown on drg.

Removing old u/s shelf carefully and S & F of new shelf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drawing. (For one shelf)

Removing old u/s door single leaf carefully and S & F of new door single leaf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/directed and shown on drawing. (For one door)

Removing old u/s legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 420x70x100 mm made to shape and fixed in the same position including painting of single coat of red oxide primer as specified/directed and shown on drg. (For one leg)

M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to Almirah Steel Medium/ Small of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah Steel Medium/ Small (FD-350/1032/1034)

Almirah Steel Large (FD-1031/1033/351/TP) Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected (For one clip).

Removing old u/s cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet for almirah large steel made to suitable for locking device complete all as specified/directed and shown on drg.

Removing old u/s shelf of almirah large carefully and S & F of new shelf made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drg. (For one shelf)

Removing old u/s door single leaf carefully and S & F of new door single leaf for almirah large made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drg.

Removing old u/s legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 485x70x100 mm for almirah large made to shape and fixing in the same position including painting of single coat of red oxide primer as specified/directed and shown on drawing. (For one leg)

M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to the following furniture article of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah Steel Large (FD-1031/1033/351/TP)

Teapoy Verandah (FD-205/208/383) Removing old unserviceable top from Teapoy Verandah steel and supply and fixing new top 18 mm thick prelaminatedMDF board exterior grade with top face decorative teak wood shade lamination and other side balancing white lamination including 6mm x 18mm teak wood edging alround top fixed as per drg and as directed.

Teapoy Verandah (FD-205/208/383.) M & L for painting one coat of synthetic enamel paint approved shade to steel surfaces of Teapoy Verandah of MES pattern all as specified & directed and shown on drawings including removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings.

Table dining ORs 1900x685x760 mm (Drg No FD-165) Removing old unserviceable table top and S & F new table top 1830 mm x 680 mm using 18 mm thick block board including covering the top surface with 22 gauge aluminium sheet cut to size and fixed with MS screws of size as directed complete all as shown on drg.

Table dining ORs 1900x685x760 mm (Drg No FD-165) Removing rusted/ unserviceable long rail/ long stiffner and S & F new long rail/ long stiffner made out of 25 mm MS square tube, 1.6 mm thick, 1550 mm long, fixed by means of continuous welding to legs/ short stiffner to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drawing.

Table dining ORs 1900x685x760 mm (Drg No FD-165) Removing rusted/ unserviceable short rail/ short stiffner and S & F new short rail/ short stiffner made out of 25mm MS square tube, 1.6 mm thick 465 mm long, fixed by means of continuous welding to legs to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer all as specified & directed and shown on drawing.

Table dining ORs 1900x685x760 mm (Drg No FD-165) Removing rusted/ unserviceable leg and S & F new leg made out of 25 mm MS square tube 1.6 mm thick, 741mm long, fixed by means of continious welding to rails/ stiffner to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer all as specified & directed and shown on drawing.

Table dining ORs 1900x685x760 mm (Drg No FD-165) M & L for painting one coat of synthetic enamel paint approved shade to steel surfaces of Table dining ORs of MES pattern including Removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings.

Table office clerk steel (FD-84M/1004) Removing old unserviceable table top and S&F new table top 1220x610 mm using 18 mm thick prelaminatedMDF board exterior grade one side decorative teak wood shade and other side balancing white including 4 x 18 mm thick teak wood edging alround the table top complete all as specified & directed and shown on drg.

Table office clerk steel (FD-84M/1004) Removing old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting with one coat of synthetic enamle paint over a coat of red oxide primer after necessary preparation of surface complete all as specified and directed.

Table office clerk steel (FD-84M/1004) M & L for painting to steel surfaces of table office clerk with one coat of synthetic enamel paint of approved shade both internally and externally by Removing dents, applying putty to the level of the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

Table office officers steel (FD-1003) Removing old unserviceable table top and S & F new table top 1680x870 mm using 18 mm thick prelaminatedMDF board exterior grade one side decorative teak wood shade and other side balancing white including 18 x 4 mm thick teak wood edging alround the table top complete all as specified & directed and shown on drg.

Table office officers steel (FD-1003) Removing old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting with one coat of synthetic enamle paint over a coat of red oxide Primer after necessary preparation of surface complete all as specified and directed.

Table office officers steel (FD-1003) M & L for painting one coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of table officer office steel by removing dents and applying putty to the level the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

Table 900x900x760 mm Drg No FD-1009 Removing old unserviceable table top and S&F new table top 900x900 mm using 18 mm thick prelaminatedMDF board exterior grade one side teak wood shade and other side balancing white with 18x 4mm thick teak wood beading all around the top of table complete all as specified & directed and shown on drg.

Table 900x900x760 mm Drg No FD-1009 Removing rusted/ unserviceable top rail and S & F new top rail made out of 25 mm MS square tube 1.6 mm thick, 750mm long, fixed by means of continious welding to legs to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer complete all as specified & directed and shown on drawing.

Table 900x900x760 mm Drg No FD-1009 Removing rusted/ unserviceable leg and S & F new leg made out of 25 mm MS square tube, 1.6 mm thick, 760 mm long leg fixed by means of continuous welding to rails to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer complete all as specified & directed and shown on drawing.

Table 900x900x760 mm Drg No FD-1009 M & L for painting one coat of synthetic enamel paint approved shade both internally and externally to Table 900x900x760 mm Drg No FD-1009 of MES pattern by removing dents applying putty to level the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

Table 900x600x760 mm Drg No FD-1007/1008 Removing old unserviceable table top and S & F new table top 900x600 mm using 18 mm thick prelaminatedMDF board exterior grade one side teak wood shade and other side balancing white with 18 x 4mm thick teak wood beading all around the top of table complete all as specified & directed and shown on drg.

Table 900x600x760 mm Drg No FD-1007/1008 Removing rusted/ unserviceable long rail/ stiffner and S & F new long rail/stiffner made out of 25 mm MS square tube 1.6 mm thick, 750mm long, fixed by means of continuous welding to legs/ stiffner to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer complete all as specified & directed and shown on drawing.

Table 900x600x760 mm Drg No FD-1007/1008 Removing rusted/ unserviceable Short rail/ stiffner and S & F shot rail/ stiffner made out of 25 mm MS square tube 1.6 mm thick, 742mm long, fixed by means of continuous welding to legs to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer with preparation of surfaces complete all as specified & directed and shown on drawing.

Table 900x600x760 mm Drg No FD-1007/1008 Removing rusted/ unserviceable leg S & F new leg made out of 25 mm MS square tube 1.6 mm thick, 742mm long, fixed by means of continuous welding to Rails/stiffner to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer with preparation of surfaces complete all as specified & directed and shown on drawing.

Table 900x600x760 mm Drg No FD-1007/1008 Removing old unserviceable drawers from table 900 X 600 X 760 mm steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting with one coat of synthetic enamle paint over a coat of red oxide primer after necessary preparation of surface complete all as directed.

Table 900x600x760 mm Drg No FD-1007/1008 M & L preparation of surfaces and painting one coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of Table 900x600x760 mm Drg No FD-1007/1008 of MES pattern by removing dents applying putty to level the surface before painting including Removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable back plywood from Table Bed side and S&F new back made of 6mm thick commercial plywood exterior grade one side teak wood shade and other side balancing white ISI Marked complete all as specified and shown in Drg.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable shelves from Table Bed side and S&F new shelves made of 18mm thick pre-laminated particle board exterior grade one side teak wood shade and other side balancing white duly provided with 4 mm thick Teak wood beeding complete all as specified and Shown in Drg.

Table Bed side (FD/E6/MAP/15(R) Taking out unserviceable side from Table Bed side and S&F new side made of pre-laminted particle board exterior grade one side teak face and other side balancing white with 4mm thick teak wood beading matching with the existing shape & size complete all as specified and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable top/bottom from Table Bed side and S&F new top/bottom made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white complete all as specified, shown on drg and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable shutter from Table Bed side and supply and fix new shutter made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white including handle complete all as specified, shown on drg and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable drawer from Table Bed side and supply and fix new drawer made of 12mm thick commercial ply including handle complete all as specified, shown on drg and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) M & L painting one coat of synthetic enamel paint of approved shade to steel parts of Table bed side steel of MES pattern including preparation of surfaces all as specified, directed and shown on drawings.

Chair writing cushioned FD/E6/MAP/12 Taking out / Dismantling of worn out / Damaged / defectiive seat/ Back of Chair writing cushioned FD/E6/MAP/12 and replacing the same with new seat/ back of MES pattern and fixing in same position including painting the steel part and replacing handle with rubber bush as per drg & as directed by Engr-in-Charge.FD-E6/MAP/12.

Table office officers/clerk steel (FD-1003) &FD-84M/1004 Removing old unserviceable Lock of drawers from table office clerk/Officer steel and supply and fixing new lock 6 levers with duplicate keys to drawer steel complete all as specified and directed.

BALAJISTEELINDUSTRIES (BID ID -3322600)

Mahesh Traders (BID ID -3315252)

A.K. MARKETING ASSOCIATES (BID ID -3324705)

SN POWER TECH (BID ID -3316245)