C/o Multipurpose JICA Sale Outlet and cafeteria at carignano nature park Mashobra range Shimla HP Site development and construction of building portion

Amount

Earth work in excavation by mechanical means(hydraulic excavtor)/manaul means over areas(exceeding 30cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth all lead lift and sorting out useful and unuseful material and unuseful material and transportation of unuseful material for disposing at dumping site (To be arranged by contractor) as Directed by Engineer-in-charge. All kind of soils

Earth work in excavation by mechanical means(hydraulic excavator)/manual means in foundation and trenches (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth all lead lift and sorting out useful and unuseful material and transportation of unuseful material for disposing at dumping site (To be arranged by contractor) Directed by Engineer-in -charge All kind of soils

Centering and shuttering including strutting, propping etc, and removal of form work for : 1. Foundation, footings and bases for columns

Centering and shuttering including strutting, propping etc, and removal of form work for : 2. Columns, piers, plinth beams, abutments, pillars, posts, pedestal and struts

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) :8 graded stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excludong and cost of centering, shuttering, finishing and reinforcement-All work up to plinth level(footing) 1:1.5:3 (1 cement :1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Rienforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up top floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) :3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Mild steel and medium tensile steel bars

Providing wood work in trusses, purling rafters, posts, post plates, wall plates, principal rafters, commen rafter edge beams, ridge beams, wooden battens under slates roofing etc and the like wrought framed, hoisted and fixed in position, including heavy duty metal plates, screws nuts and bolts for connection. (1st class Deodar wood. (Wood will be supplied/provided by the Department only)

Providing wood work in frames of false ceiling partitions etc. swan and put up in position in first. (1st) class deodar wood (roof botton ceiling) (Wood will be supplied/provided by the Department only)

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. 1st class Deodar wood (Wood will be supplied/provided by the Department only)

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hings of required size with necessay screws, excluding paneling which will be paid for separately, all complete as per directon of Engineer-in-charge. (Note- Butt hinges and necessary screws shall be paid separately) 35mm 2nd class Deodar Wood (Wood will be supplied/provided by the Department only)

Providing and fixing wire guage shutters using galvanized M.S. wire guage of average width of aperature 1.4 mm in both directions with wire of dia 0.6mm, for doors, windows and clerestory windows with hinges and neceessary screws 30mm 2nd class teak wood (Wood will be supplied/provided by the Department only)

Providing and fixing wooden plank ceiling with tougued and grooved jointing and wood screws(frame work and cover fillets to be measured and paid for separately) 20mm thick 1st class deodar wood. (125% cost enhancement/index)on HPSR2009) (Wood will be supplied/provided by the Department only)

Providing and fixing plain lining with tongued and grooved jointing with necessary screws/nuts & bolts/ nails, fixed on wooden frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separaely.) 1st class deodar wood (125%costs enhancement/index) on HPSR 2009) (Wood will be supplied/provided by the Department only)

Providing and fixing plain square edged cover fillets (beading) with wood screws in ceiling and lining including metering at junction. 50x12mm 1st class deodar wood (125% cost enhancement/index) on HPSR 2009) (Wood will be supplied/provided by the Department only)

Providing and fixing wooden moulded corner beading of triangular shape to the junction of paneling etc. With iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50x50 mm (base and height) (Wood will be supplied/provided by the Department only)

Providing and fixing 25mm thick panelled glazed or panelled and glazed shutters for cup boards etc, including necessary hings etc. 2nd class deodar wood (125% costs enhancement/index)on HPSR 2009) (Wood will be supplied/provided by the Department only)

Providing eaves board 200mmx25mm thick including fixing in position 2nd class deodar wood (Wood will be supplied/provided by the Department only)

Supplying and fixing new wooden fillets wherever necessary. 2nd class teak wood fillets (Wood will be supplied/provided by the Department only)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 2nd class teak wood 30mm thick (Wood will be supplied/provided by the Department only)

Polishing two coats with French polish on new wood and wood based surfaces like wood beam eaves board ceiling etc. to give an even surface including cleaning the surface of all dirt, dust, and sand papered smooth and including a coat of wood filler.

Half brick masonary with non modular fly ash bricks of class designation 10,conforming IS:12894, in superstructure above plinth and up to floor V level. Cement mortar 1:3 (1 Cement :3 coarse sand)

Stone work (machine cut edges) for wall lining etc, (veneer work) upto 10 meter height, backing filled with a grout of average 12mm thick cement mortar 1:3(1cement :3coarse sand) including pointing in white cement mortar 1:2(1 white cement :2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone-exposed face fine dressed with rough backing. 70 mm thick

12mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)

40 mm thick fine dressed red sand stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand), including pointing with cement ,mortar 1:2( 1 cement :2 stone dust) with an admixture of pigment to match the shade of stone.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminum angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, raw plugs etc., complete

12mm toughened glass for windows, doors, door panels etc. (weight not less than 30kg/sqm)

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring tupe fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).

Providing and fixing magnetic catcher of approved quality in cupboard/ ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)

Providing and fixing brass tower bolts for doors and windows 250x10mm

Providing and fixing brass tower bolts for doors and windows 150x10mm

Providing and fixing chromium plated brass door handles for doors and windows 125mm

Providing and fixing chromium plated brass door handles for doors and windows 100mm

Providing and fixing chromium plated brass door handles for doors and windows 75mm

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete. 40mm

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete. 65mm

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC ( Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and color. Two coats

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with CC.I brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water suppy, including all CPCV plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m Spacing. This includes jointing of pipes & fittings with one step CPCV solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm nominal outer dia Pipes.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require and waste pipe fittings and necessary traps required for waste water outlet. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre molded and pre polished, machine cut for kitchen platforms, vanity counters, window sills. Fascias and similar locations of required size, approved shade, color and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, molding and polishing to edges. Granite of any color and shade.

Providing and fixing pre coated galvanized steel roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and poluster top coat 15-18 microns using self drilling/ self tapping screws complete: 1.1 Ridges plain (500-600mm)

Flashing/ Aprons. (Up to 600mm)

Gutter (600 mm over all girth)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m.

Supplying and filling in plinth with sand under floors, including watering ramming, consolidating and dressing complete.

Slate roofing with 7.5 cm single lap single layer fixed on wooden batten (wood work to be paid for separately) (Add-125% cost enhancement/Index on HPSR)

CHAMEL SINGH (BID ID -470885)

DEVENDER KUMAR SHARMA (BID ID -470609)

OM PRAKASH (BID ID -471001)