Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.4 Craccepted-aoc | ₹1.4 Cr | accepted-aoc |
Tender Value
₹1.6 Cr
EMD Value
₹2.4 L
Closing Date
5 Dec 2025, 10:30 pmClosed
Public Works Department
EXECUTIVE ENGINEER
WIDENING AND IMPROVEMENTS OF DODDATHOTA-BOMMARU-MARKANJA ROAD FROM KM 0.00 TO 2.50 IN SULLIA TALUK
PWD/2025-26/RD/WORK_INDENT29708
PWD/2025-26/RD/WORK_INDENT29708
Open
Roads
Two Tender Document System(Two Cover)
PWD Division Office Mangaluru
5 documents required · 5 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-2025) (b) satisfactorily completed(at least 90% of contract value), as prime contractor, at least one similar Asphalt Work value not less than Rs.80.00 LAKHS (usually not less than 50% estimated value of contract)
Section 2 ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-2025) c) executed in any one year, the following minimum quantities of work Note Specify the principal items of works to be executed under this contract Section 2 ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-2025) c) executed in any one year, the following minimum quantities of work Note Specify the principal items of works to be executed under this contract 1.Earthwork Excavation/Embankment - 1352.00 m3, 2. GSB/WMM - 455.00 m3, 3. BM/SDBC- 768.00 m3, 4. Concrete Pavement M30 - 300.00 m3
The bidder should be a Class-III & Above and above PWD contractor.
Section 2 ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value amounting of Rs. 159.99 LAKHS. The available tender capacity will be calculated as under Assessed available tender capacity - (AxNx1.5 - B) where A - Maximum value of civil engineering works executed in any one year during the last five years (updated to FY 2025-26price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at FY 2025-26 price level, of existing commitments and on-going works to be completed during the next 11 Months (period of completion of the works for which Tenders are invited) Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Section 2 ITT 3.3 - Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of no less than Rs. 48.00 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.
Section 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-2025)(a) achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering works only) of Rs 319.99 LAKHS (usually not less than two times the estimated annual payments under this contract)
₹4,000
₹2.4 L
5 Dec 2025
28 Nov 2025
6 Dec 2025
4 Dec 2025
1 Dec 2025
WIDENING AND IMPROVEMENTS OF DODDATHOTA-BOMMARU-MARKANJA ROAD FROM KM 0.00 TO 2.50 IN SULLIA TALUK
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...
Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...
Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...
Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with m...
Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...
Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...
Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...
Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...
Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...
Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm...
Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, c/c spacing between vertical post n...
Patching of Deep Potholes 75mm thick by restoring the Granular Base course
using material confirming to WBM Grade -II with type B Screenings standards wherever
necessary by manual means including trim...
WIDENING AND IMPROVEMENTS OF DODDATHOTA-BOMMARU-MARKANJA ROAD FROM KM 0.00 TO 2.50 IN SULLIA TALUK
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...
Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid document KW-4 29708.docx
Tender Document • 1.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .