Special repair to DSC Mess at AF stn Mamaura

Amount

Demolition of cement concrete of ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc. complete all as specified and directed .

M&L Brick work with sub class B brick, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:6 complete all as specified and directed.

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm Thick MS sheets complete all as specified & directed.

Supply & fix pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm Thick mild steel sheets complete all as specified & directed.

S & F for 35mm thick factory Made glazed and skelton shutters of 2nd class hardwood open nebated and prepaired to receive glass gauge etc, (without sash bars) edgeg of framing plain chamfared or rounded fitted with cut and mittered beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) all as specified and directed.Make-M/s Choiti Industries kanpur, M/S Orintal Door Mandhan Kan pur,M/S Joinery manufacturing Co. Kanpur.

S & F 35 mm thick Factory Made Flush shutters of solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fix aluminium anodized barrel tower bolts 200mm long, of extruded section complete all as specified & directed.

S&F 300 mm long ISI Mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

Supply & fix stainless steel butt hinges 100mm long complete all as specified and directed .

Material & labour for factory made steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongry as required (iii) Guard bars glazing & wire mesh shall however be measured & paid for separately under respective items of Sch ‘A’ complete all as specified and directed .

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

All as per ser item No.15 above but pin headed glass 3 mm thick.

S & F of stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed.

Supply & fix factory made steel ventilators with top hung shutter including hinges ,steel peg stay etc. complete all as specified and directed.

Supply & fix mild steel framed work such as grills, grating, etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railing,cooler stands etc and similar work complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed

Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm thick prelam PVC sheet instead of plain colour PVC sheet reinforced with MS square tubes complete all as specified & directed.

S&F factory made solid panel PVC shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded wood grain printed coloured PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side prelam PVC Sheet instead of plain colour PVC sheets & 5mm thick x 15mm wide PVC sheet beading inside for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of both side prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with decorative PVC beading of 10mm x 10mm used and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.

S&F aluminium tower bolts 150mm long, of extraded section complete all as specified & directed.

S&F aluminium handles 125mm long, cast type, anodised complete all as specified & directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Material & labour for preparation of new or old previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 25mm Dia PVC coating Mild steel curtain rod with two Nos of gold polish PVC end knob and with powder coated MS brackets complete all as specified and as directed.Note:- Each curtain rod shall be 60 cm extra long to the size of clear opening.The each curtain rod will be minimum 750 mm and maximum 2.40 mtr length complete all as specified and directed.

Supply & fix mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone agg) for hold fast, coping,pressed steel frame, benching roof kerbs etc . complete all as specified and directed.

Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed .

Material & labour for reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone agg) used as in chajja, facia, shelves, manhole cover etc any height up to double storey bldgs etc complete all as specified and directed.

M & L for form work with scaffolding to chajjas,facia and similiar work including edges any height up to double storey bldgs fair finished comlplete all as specified and directed.

Material & labour mild steel deformed bars 6mm to 8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

Taking out bushes, digging out roots n.exc 30 centimeter girth from old brick walls and filling holes with CM 1:3 or PCC 1:2:4 type B-1 and removing of roots/bushes to a distance n exc 50 M and clearing the sites complete all as directed

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed .

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed.

M & L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth complete all as specified & directed.

Material & labour for rendering 10mm thick in cm 1:4 as in ceiling/ chajja Facia finished even & fair faces complete all as specified and directed .

M & L for prepration of new plastered or unplastered surfaces of wall and applying a layer of Birla / JK. wall care putty and applying two coats of oil bound distemper complete all as specified an directed.

M&L complete removal of existing treatment of any description from old decorated surface of wall and applying two coats of oil bound distemper ,over a coat of Birla/JK wall putty complete all as specified and directed.

M&L for complete removal of existing treatment of any description from old decorated surface of wall including preparation of surface properly and applying two coats of cement base paint complete all as specified and as directed.

M&L preparing of new plastered surface of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed.

Material & labour for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

All as ser item No. 43 above but two coat on old ceiling surfaces.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

M&L for 300 x 450 x 7 mm thick joint free Glazed ceramic coloured tiles(premium quality) in dado/skirting etc set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:4 complete all as specifed.

M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specifed and dircted.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

All as per Sl Item No.48 here-in-before but 20 mm bore pipe.

Supply & fix tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed .

All as per item No. 50 above but 20 mm bore pipe.

Cutting Chases for concealed water tubing etc and making good disturbed surfaces, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed.

Supply & fix in repair rotational moulded polyethylene water storage tanks 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down the existing tank complete all as specified and directed .

Supply & fix 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed .

S&F in repair 15 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fix in repair gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed .

Supply & fix in repair bib taps brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed .

Supply & fix in repair of vitreous china squatting pan ‘Orrisa pattern’ of size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 Ltr capacity white with inlet , ball valve, float and handle incl brackets incl 32 mm dia PVC flush pipe for low level cistern all as specified

Supply & fix in repair vitreous china wash hand basin, white size 450x300 mm including brackets, CP waste coupling & PVC waste pipe of 32 mm dia complete all as specified and directed.

S&F in repair 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified & directed.

Supply & fix in repair 15 mm dia angle stop cock fancy type CP screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed .

Supply & fix in repair PVC(SWR) floor trap 75 mm bore with grating including jointing to waste pipe in cement mortar complete all as specified & directed.

S & F in repair PVC connection with CP brass nuts 375 mm long all as specified and directed .

S&F in repair chromium plated towel rail 600 mm long, 20mm dia of a approved quality, complete all as specified & directed.

S&F in repair 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC bend pipe etc complete all as specified and directed

S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC bend pipe etc complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleanig of surface complete all as specified and directed.

Taking down carefully, copper/aluminium point wiring (light, fan, socket or power) including all fittings and fixtures such as switches, lamp holder, regulator, switch socket outlet, bulk head fitting tube light fittings etc and making good disturbed materials from the site of work and making good disturbed surfaces of walls with cement mortar and white /colour wash to match with existing surfaces etc. complete all as specified and directed.

M&L for point wiring complete with FRLSH PVC insulated and unsheathed cable 2x 1.5 sq mm (nominal area) multi stranded copper conductor FRLSH single core Conforming to IS: 694, including medium duty concealed PVC conduit conforming to ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of suitable size duly inside & outside painted with two coats of synthetic enamel paint over one coat of red oxide primer and with top cover 3 mm thick of plastic laminated sheets of required colour complete with all accessories and all as specified including PVC insulated and unsheathed cable 1x1.5 sqmm (nominal area) stranded copper conductor FRLSH single core Conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete for following

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring complete for one socket outlet 15 amps on an independent board with PVC insulated and unsheathed cable 2x2.5 Sqmm (nominal area) stranded copper conductor FRLSH single core conforming to IS: 694 , including medium duty concealed PVC conduit , ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of reqd. size (factory made) including painting terminal boxes inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer and with top cover 3 mm thick of plastic laminated sheets of required colour, complete with all accessories and all as specified including PVC insulated and unsheathed cable 1x2.5 sqmm (nominal area) stranded copper conductor FR single core conforming to IS : 694 of green colour as earth wire to common earth and connected to earth complete.

Supplying and fixing angle holder, insulated polycabonate body with back plate complete all as specified and directed ..

Supplying and fixing switch piano flush button single pole one way 6 amp complete all as specified and directed ..

Supplying and fixing switch piano flush button single pole one way 16 amp complete all as specified and directed .

Supplying and fixing socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed .

Supplying and fixing socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed .

Supplying and fixing ceiling rose 63 x 25 mm three terminals complete all as specified and directed .

Disconnicting& taking down celling fan carefully during re wiring work& after complete re wirwing hanging & connecting celling fan complete as directed.

Supplying and fixing hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed .

S&F in replacement of tubelight fitting LED 18/20 watt, 6000K, 230 volt, LED batten complete with high brightness LED tubelight in opal finish and connection wire twin core of suitable size from nearest source etc. complete all as specified and directed . Make:- crompton cat part no:LDESLM / Havells / Philips / CG.

S&F LED Bulb 9 watt, 230 volt with high brightness LED complete all as specified and directed . Make:- crompton / Havells / Philips / CG.

Supplying and fixing SPN, 240 volts, 8 ways double door powder coated, CRCA steel sheet MCB distribution board (minimum thickness 1.2 mm & constructed as per IS : 8623), degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc complete all as specified and directed .

Supplying and fixing as per load requirement 'C' series MCBs of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

SPN 240, 6 to 32 amp.

Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make. MCB DBs shall be fixed on wall in flush pattern by cutting the wall and making good disturbed surfaces.

Material and labour for submain wiring in repairs, alongwith earth continuity conductor with PVC insulated FRLS multistrand copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked with all conduit accessories of following nominal sizes:- Note :( Taking down of old unserviceable sub main wiring deemed to be included in quoted rate)

2x4 sq mm + 1x4.0 sq mm (earth) in 20 mm dia conduit.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Material and labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

M/S ALOK SRIVASTAVA

M/S A.R BUILDERS