PROVN OF RATION STORE AND REGTL STORE FOR FD WKSP COY EME BN AND PROVN OF 05 X URINAL POT IN WKSP AREA OF FD WKSP COY EME BN AT DIPATOLI MIL STN UNDER GE DIPATOLI

Amount

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, n.exc 10 sq.m on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete complete all as specified and directed by Engineer-in-Charge

Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge

M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6) complete all as specified and directed by Engineer-in-Charge

Brick work with Sub-Class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in (1:4) cm complete all as specified and directed by Engineer-in-Charge

M&L 15mm thick plastering on wall concrete surfaces in cm (1:6) finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge

Returning/filling in layer n'exc 25 cm thick including spreading, levelling watering well ramming etc complete all as specified and directed by Engineer-in-Charge

Removing excavated soil to distance n'exc 50 mtr and deposited complete all as specified and directed by Engineer-in-Charge

M&L 15mm thick rendering in CM 1:4 on brick/concrete surface, finished the surface even and fair with using wpc. ( wpc shall be measured and paid seperetely) complete all as specified and directed by Engineer-in-Charge

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge

M&L hard core of gauge n'exc 63 mm of broken stone or boulders deposited spread and leveled in layers n . exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge

M&L cement concrete 100mm thick as in sub base of floor type C2,1:3:6 using 40mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge

M&L Machine cut kota stone slab flooring 20-25 mm thick set over and including 15mm thick screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and as directed by Engr-in-Charge.

All as per item No-13 but here-in-before as in skirting over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L preparation of newly plastered surfaces and applying 3 coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge

All as per item No 15 above but on wall complete all as specified and directed by Engineer-in-Charge.

M&L preparing new surface on walls and applying 2 coats of cement based paint over one coat of primer on external walls complete all as specified and directed by Engineer-in-Charge

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and as directed by Engr-in-Charge.

S & F mild steel butt hinges 100mm long medium weight cold rolled , complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed of 150mm size complete all as specified and directed by Engineer-in-Charge.

S&F 125mm size aluminium handles, cast type anodised complete all as specified and directed by Engineer-in-Charge.

S&F 10mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia complete all as specified and directed by Engineer-in-Charge

S&F 6 to 8mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia complete all as specified and directed by Engineer-in-Charge.

All as per item No 25 above but 8mm dia as in stirrups complete all as specified and directed by Engineer-in-Charge.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

M&L preparing new surface of steel any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge.

S & F Sheet glass, figured glaas ,pin headed in square n exc 0.5 sqm in each pane, 3mm thick complete all as specified and directed by Engineer-in-Charge.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick as in plinth protection /path etc complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced cement concrete in mix 1:1½:3 (using 20mm graded aggregates) in foundations, including rafts, footings, plinth beams etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 33 above but in Columns, pillars complete all as specified and directed by Engineer-in-Charge.

All as per item No 33 above but in chajjas complete all as specified and directed by Engineer-in-Charge.

All as per item No 33 above but in beams and lintel complete all as specified and directed by Engineer-in-Charge.

All as per item No 33 above but in floor/roof slab complete all as specified and directed by Engineer-in-Charge.

M&L formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beam, and similar work, vertical or batter work fair finished flat surface of concrete complete all as specified and directed.

All as per item No 38 but in columns/post complete all as specified and directed by Engineer-in-Charge.

All as per item No 38 but in Chajjas complete all as specified and directed by Engineer-in-Charge.

All as per item No 38 above but in sides and soffits of beams complete all as specified and directed by Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slab , etc flat not exceeding 200mm thick fair finished surface complete all as specified and directed.

Form work to edges of concrete flats, treads, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls etc for fair finished complete all as specified and directed.

Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand) complete all as specified and directed.

All as per item No 44 above but without glazing bars complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L rendering 5 mm thick cement plaster in mix 1:3, on fair faces of concrete of ceiling surface complete all as specified and directed.

Forming square grooves in plaster n.exc 12mm deep and n exc 15mm on face complete all as specified and directed.

Preparation of concrete roof surfaces by washing down with water and applying roof treatment as under :- (a) Brushing neat cement slurry with 3.00 kg of cement per square metre (b) Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (c) Laying of 3mm thick APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer's instructions (d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM (Super Silver sheild of STP Ltd or equivalent as approved by GE)

M&L Cement concrete in floors 25mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement.

M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed by Engr-in-Charge.

M & L joint free Non Skid ceramic colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and as directed by Engr-in-Charge.

S & F PVC door chowkhats of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 15mm dia stop valve CP fancy type long body screwed to unioun or GI pipe etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms) complete all as specified and as directed by Engr-in-Charge.

S & F GI water tubes medium grade 15mm bore with fittings laid in floors/wals complete all as specified and directed .

S & F GI water tubes medium grade 20mm bore with fittings laid in floors/wals complete all as specified and directed .

S & F bib tap brass 15mm dia cost copper alloy with butter fly handle CP fancy type complete all as specified and as directed by Engr-in-Charge.

S&F PVC Connections 15mm size and 450mm length complete all as specified and as directed by Engr-in-Charge.

S&F 110mm PVC (SWR) WC connections short connections bent type complete all as specified and as directed by Engr-in-Charge.

S&F 110mm PVC (SWR) branch pieces, single equal or unequall complete all as specified and as directed by Engr-in-Charge.

S&F 110mm PVC (SWR) Bends any radius complete all as specified and as directed by Engr-in-Charge.

S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge.

Ditto as per item No 65 but fixed in wall complete all as specified and as directed by Engr-in-Charge.

M&L PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (cpacity 500 litres) complete all as specified and as directed by Engr-in-Charge.

M&L Ball brass valves, high pressure, with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous china wash Basin white flat back size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F 32mm low density polyethylene (LDPE) pipes complete all as specified and as directed by Engr-in-Charge.

S&F pillar cock 15mm dia CP fency type complete all as specified and as directed by Engr-in-Charge.

S&F 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-Charge.

S&F gate valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fixing vitreous china urinal , half stall type, white with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/parnala to wall/roof fixed with self tapping screws as specified

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed by Engr-in-Charge.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC conealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed.Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 79 here-in-before but one 3 Pin Socket out let 5 Amps on the same board complete all as specified and as directed by Engr-in-Charge.

All as per Ser item No 79 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board complete all as specified and as directed by Engr-in-Charge.

All as per Ser item No-79 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly complete all as specified and as directed by Engr-in-Charge.

S&F Switch piano type , single pole , one way15 Amps complete all as specified and directed. Make :- Polycab/Havells/Anchor

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed .Make :- Polycab/Havells/Anchor

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.Make :- Polycab/Havells/Anchor

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.Make : Polycab/Havells/Anchor

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed at site.Make:- Polycab/Havells/Anchor

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site.Make : Polycab/Havells/Anchor

Supply and fix in replacement Blanking Plates for covering of MCB DB open space complete all as specified and directed at site.Make : Legrand /Havells/HPL

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs. (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces.(iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No-90 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire complete all as specified and as directed by Engr-in-Charge.

All as per ser item No-90 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire complete all as specified and as directed by Engr-in-Charge.

Supply and fix MCB DB SPN 8 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed at site. Make -Legrand /Havells/HPL/Schneider

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.Make Havells /Schenider /Legrand.

S&F in replacement of MCB DP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.Make -Havells/ Schenider /Legrand .

S&F in replacement of LED tube light fitting 18/20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site. Make : - Cat/part No.LUMILINEPLUSBS18W LED865SPCSS of Havells or equivalent in Philips/LUKAR/C&S

S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site.Make : Havells Cat No:-ENDURACITYLITEPLATPLUSSL35WLED 757SASYBOPC or equivalent in Philips/C&S

S&F celling fan assy of 1200 mm Sweep 210 volts , noise operation ,metallic body with complete assoceries & energy efficient all as specified & directed.(Make-Philips/Usha/Orient)(Location-In hall-3 nos& varamda-1)

S&F of ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed. Make : Havells model ventil Air - DB or equivalent as per list of makes.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 25 sqmm 3.5 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement .

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed

Supply & Fixing in repair G.I tubes 40 MM Lite grade Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution as directed at site.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire.

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr in Charge.Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

S&F switch piano type , SP, one way, flush type 5 Amps complete all as specified and as directed by Engr-in-Charge.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 25 sqmm 3 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Supply & Fixing in repair G.I tubes 25 MM med grade Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution as directed at site.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends with union,long screw with check nut for iron pipe incl taking down existing gate valve complete all as directed at site of size 25 mm. following sizes .

Supply, install and test All in One Integrated Solar LED Street light 20 watt with MPPT charge controller IP-65 protection, compact design, extruded aluminium / Die cast housing, comprising of of LED Luminaire having Output >7500 Lumen with monocrystalline silicon panel and high efficacy >120 lm/Watt, with motion based dimmer feature, mounted on hot dip galvanised octagonal pole complete, all as specified and directed by Engr-in-Charge. INTEGRTATED SOLAR LIGHT: (i) Solar Panel: Mono crystalline panel, 20 Watts (ii) Charge Controller type :- MPPT charge controller in build PIR motion sensor . (iii) Battery :- Lithium Ferro phosphate battery as per Manufcturere's design with two days of backup, 12.8 V, 24 Ah. Note :- (i) Exavation, Return filling, Removal and PCC (1:3:6) type C1 work for pole deemed to be included in quoted rate (ii) Octagonal pole for Solar light will be paid seperately. Make : Crompton cat No. CSADSM20CDL-NC or its equivalent in Philips/L&T

Supply and fix Octagonal hot dip galvanised iron pole, 6m long with base plate, 300 mm long weather proof reinforced door opening with junction box mounting arrangement, inbuilt junction box, 'J' shape, EN8 foundation bolt with nuts template including PCC foundation as per manuacturer's design all as directed by Engineer-in-charge. (Location :- Dipatoli)

S&F DOL starter 415 V, 3 Phase upto 3 HP complete all as specified and as directed.

SSupply and fix in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe with unions and fixed complete with suitable size of fittings like unions, long screw with check nut for iron pipe incl taking down existing stop valve complete all as directed at site of following sizes. (a) 15mm dia bore

(b) 20mm dia bore

(c) 25mm dia bore

Associated Engineers

Bihar traders